From: Sarthak Kukreti <sarthakkukreti@chromium.org>
To: dm-devel@redhat.com, linux-block@vger.kernel.org,
linux-ext4@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-fsdevel@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>,
"Michael S. Tsirkin" <mst@redhat.com>,
Jason Wang <jasowang@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Alasdair Kergon <agk@redhat.com>,
Mike Snitzer <snitzer@kernel.org>,
Christoph Hellwig <hch@infradead.org>,
Brian Foster <bfoster@redhat.com>, Theodore Ts'o <tytso@mit.edu>,
Andreas Dilger <adilger.kernel@dilger.ca>,
Bart Van Assche <bvanassche@google.com>,
"Darrick J. Wong" <djwong@kernel.org>,
Sarthak Kukreti <sarthakkukreti@chromium.org>
Subject: [PATCH v7 5/5] loop: Add support for provision requests
Date: Mon, 22 May 2023 15:09:55 -0700 [thread overview]
Message-ID: <20230522221000.603769-1-sarthakkukreti@chromium.org> (raw)
In-Reply-To: <20230522163710.GA11607@frogsfrogsfrogs>
On Mon, May 22, 2023 at 9:37 AM Darrick J. Wong <djwong@kernel.org> wrote:
>
> If someone calls fallocate(UNSHARE_RANGE) on a loop bdev, shouldn't
> there be a way to pass that through to the fallocate call to the backing
> file?
>
> --D
>
Yeah, I think we could add a REQ_UNSHARE bit (similar to REQ_NOUNMAP) to pass down the intent to the backing file (and possibly beyond...).
I took a stab at implementing it as a follow up patch so that there's less review churn on the current series. If it looks good, I can add it to the end of the series (or incorporate this into the existing block and loop patches):
From: Sarthak Kukreti <sarthakkukreti@chromium.org>
Date: Mon, 22 May 2023 14:18:15 -0700
Subject: [PATCH] block: Pass unshare intent via REQ_OP_PROVISION
Allow REQ_OP_PROVISION to pass in an extra REQ_UNSHARE bit to
annotate unshare requests to underlying layers. Layers that support
FALLOC_FL_UNSHARE will be able to use this as an indicator of which
fallocate() mode to use.
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
---
block/blk-lib.c | 6 +++++-
block/fops.c | 6 +++++-
drivers/block/loop.c | 35 +++++++++++++++++++++++++++++------
include/linux/blk_types.h | 3 +++
include/linux/blkdev.h | 3 ++-
5 files changed, 44 insertions(+), 9 deletions(-)
diff --git a/block/blk-lib.c b/block/blk-lib.c
index 3cff5fb654f5..bea6f5a700b3 100644
--- a/block/blk-lib.c
+++ b/block/blk-lib.c
@@ -350,6 +350,7 @@ EXPORT_SYMBOL(blkdev_issue_secure_erase);
* @sector: start sector
* @nr_sects: number of sectors to provision
* @gfp_mask: memory allocation flags (for bio_alloc)
+ * @flags: controls detailed behavior
*
* Description:
* Issues a provision request to the block device for the range of sectors.
@@ -357,7 +358,7 @@ EXPORT_SYMBOL(blkdev_issue_secure_erase);
* underlying storage pool to allocate space for this block range.
*/
int blkdev_issue_provision(struct block_device *bdev, sector_t sector,
- sector_t nr_sects, gfp_t gfp)
+ sector_t nr_sects, gfp_t gfp, unsigned flags)
{
sector_t bs_mask = (bdev_logical_block_size(bdev) >> 9) - 1;
unsigned int max_sectors = bdev_max_provision_sectors(bdev);
@@ -380,6 +381,9 @@ int blkdev_issue_provision(struct block_device *bdev, sector_t sector,
bio->bi_iter.bi_sector = sector;
bio->bi_iter.bi_size = req_sects << SECTOR_SHIFT;
+ if (flags & BLKDEV_UNSHARE_RANGE)
+ bio->bi_opf |= REQ_UNSHARE;
+
sector += req_sects;
nr_sects -= req_sects;
if (!nr_sects) {
diff --git a/block/fops.c b/block/fops.c
index be2e41f160bf..6848756f0557 100644
--- a/block/fops.c
+++ b/block/fops.c
@@ -659,7 +659,11 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
case FALLOC_FL_KEEP_SIZE:
case FALLOC_FL_UNSHARE_RANGE | FALLOC_FL_KEEP_SIZE:
error = blkdev_issue_provision(bdev, start >> SECTOR_SHIFT,
- len >> SECTOR_SHIFT, GFP_KERNEL);
+ len >> SECTOR_SHIFT, GFP_KERNEL,
+ (mode &
+ FALLOC_FL_UNSHARE_RANGE) ?
+ BLKDEV_UNSHARE_RANGE :
+ 0);
break;
case FALLOC_FL_ZERO_RANGE:
case FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE:
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 7fe1a6629754..c844b145d666 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -306,6 +306,30 @@ static int lo_read_simple(struct loop_device *lo, struct request *rq,
return 0;
}
+static bool validate_fallocate_mode(struct loop_device *lo, int mode)
+{
+ bool ret = true;
+
+ switch (mode) {
+ case FALLOC_FL_PUNCH_HOLE:
+ case FALLOC_FL_ZERO_RANGE:
+ if (!bdev_max_discard_sectors(lo->lo_device))
+ ret = false;
+ break;
+ case 0:
+ case FALLOC_FL_UNSHARE_RANGE:
+ if (!bdev_max_provision_sectors(lo->lo_device))
+ ret = false;
+ break;
+
+ default:
+ ret = false;
+ }
+
+ return ret;
+}
+
+
static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
int mode)
{
@@ -316,11 +340,7 @@ static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos,
struct file *file = lo->lo_backing_file;
int ret;
- if (mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE) &&
- !bdev_max_discard_sectors(lo->lo_device))
- return -EOPNOTSUPP;
-
- if (mode == 0 && !bdev_max_provision_sectors(lo->lo_device))
+ if (!validate_fallocate_mode(lo, mode))
return -EOPNOTSUPP;
mode |= FALLOC_FL_KEEP_SIZE;
@@ -493,7 +513,10 @@ static int do_req_filebacked(struct loop_device *lo, struct request *rq)
case REQ_OP_DISCARD:
return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE);
case REQ_OP_PROVISION:
- return lo_fallocate(lo, rq, pos, 0);
+ return lo_fallocate(lo, rq, pos,
+ (rq->cmd_flags & REQ_UNSHARE) ?
+ FALLOC_FL_UNSHARE_RANGE :
+ 0);
case REQ_OP_WRITE:
if (cmd->use_aio)
return lo_rw_aio(lo, cmd, pos, ITER_SOURCE);
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index b7bb0226fdee..1a536fd897cb 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -423,6 +423,8 @@ enum req_flag_bits {
*/
/* for REQ_OP_WRITE_ZEROES: */
__REQ_NOUNMAP, /* do not free blocks when zeroing */
+ /* for REQ_OP_PROVISION: */
+ __REQ_UNSHARE, /* unshare blocks */
__REQ_NR_BITS, /* stops here */
};
@@ -451,6 +453,7 @@ enum req_flag_bits {
#define REQ_FS_PRIVATE (__force blk_opf_t)(1ULL << __REQ_FS_PRIVATE)
#define REQ_NOUNMAP (__force blk_opf_t)(1ULL << __REQ_NOUNMAP)
+#define REQ_UNSHARE (__force blk_opf_t)(1ULL << __REQ_UNSHARE)
#define REQ_FAILFAST_MASK \
(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 462ce586d46f..60c09b0d3fc9 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1049,10 +1049,11 @@ int blkdev_issue_secure_erase(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp);
extern int blkdev_issue_provision(struct block_device *bdev, sector_t sector,
- sector_t nr_sects, gfp_t gfp_mask);
+ sector_t nr_sects, gfp_t gfp_mask, unsigned int flags);
#define BLKDEV_ZERO_NOUNMAP (1 << 0) /* do not free blocks */
#define BLKDEV_ZERO_NOFALLBACK (1 << 1) /* don't write explicit zeroes */
+#define BLKDEV_UNSHARE_RANGE (1 << 2) /* unshare range on provision */
extern int __blkdev_issue_zeroout(struct block_device *bdev, sector_t sector,
sector_t nr_sects, gfp_t gfp_mask, struct bio **biop,
--
2.39.2
next prev parent reply other threads:[~2023-05-22 22:10 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 22:33 [PATCH v7 0/5] Introduce provisioning primitives Sarthak Kukreti
2023-05-18 22:33 ` [PATCH v7 1/5] block: Don't invalidate pagecache for invalid falloc modes Sarthak Kukreti
2023-05-19 4:09 ` Christoph Hellwig
2023-05-19 15:17 ` Darrick J. Wong
2023-05-18 22:33 ` [PATCH v7 2/5] block: Introduce provisioning primitives Sarthak Kukreti
2023-05-19 4:18 ` Christoph Hellwig
2023-06-09 20:00 ` Mike Snitzer
2023-05-18 22:33 ` [PATCH v7 3/5] dm: Add block provisioning support Sarthak Kukreti
2023-05-18 22:33 ` [PATCH v7 4/5] dm-thin: Add REQ_OP_PROVISION support Sarthak Kukreti
2023-05-19 15:23 ` Mike Snitzer
2023-06-08 21:24 ` Mike Snitzer
2023-06-09 0:28 ` Mike Snitzer
2023-05-18 22:33 ` [PATCH v7 5/5] loop: Add support for provision requests Sarthak Kukreti
2023-05-22 16:37 ` [dm-devel] " Darrick J. Wong
2023-05-22 22:09 ` Sarthak Kukreti [this message]
2023-05-23 1:22 ` Darrick J. Wong
2023-10-07 1:29 ` Sarthak Kukreti
2023-05-19 4:09 ` [PATCH v7 0/5] Introduce provisioning primitives Christoph Hellwig
2023-05-19 14:41 ` Mike Snitzer
2023-05-19 23:07 ` Dave Chinner
2023-05-22 18:27 ` Mike Snitzer
2023-05-23 14:05 ` Brian Foster
2023-05-23 15:26 ` Mike Snitzer
2023-05-24 0:40 ` Dave Chinner
2023-05-24 20:02 ` Mike Snitzer
2023-05-25 11:39 ` Dave Chinner
2023-05-25 16:00 ` Mike Snitzer
2023-05-25 22:47 ` Sarthak Kukreti
2023-05-26 1:36 ` Dave Chinner
2023-05-26 2:35 ` Sarthak Kukreti
2023-05-26 15:56 ` Brian Foster
2023-05-25 16:19 ` Brian Foster
2023-05-26 9:37 ` Dave Chinner
2023-05-26 15:47 ` Brian Foster
[not found] ` <CAJ0trDbspRaDKzTzTjFdPHdB9n0Q9unfu1cEk8giTWoNu3jP8g@mail.gmail.com>
2023-05-26 23:45 ` Dave Chinner
[not found] ` <CAJ0trDZJQwvAzngZLBJ1hB0XkQ1HRHQOdNQNTw9nK-U5i-0bLA@mail.gmail.com>
2023-05-30 14:02 ` Mike Snitzer
[not found] ` <CAJ0trDaUOevfiEpXasOESrLHTCcr=oz28ywJU+s+YOiuh7iWow@mail.gmail.com>
2023-05-30 15:28 ` Mike Snitzer
2023-06-02 18:44 ` Sarthak Kukreti
2023-06-02 21:50 ` Mike Snitzer
2023-06-03 0:52 ` Dave Chinner
2023-06-03 15:57 ` Mike Snitzer
2023-06-05 21:14 ` Sarthak Kukreti
2023-06-07 2:15 ` Dave Chinner
2023-06-07 23:27 ` Mike Snitzer
2023-06-09 20:31 ` Mike Snitzer
2023-06-09 21:54 ` Dave Chinner
2023-10-07 1:30 ` Sarthak Kukreti
2023-06-07 2:01 ` Dave Chinner
2023-06-07 23:50 ` Mike Snitzer
2023-06-09 3:32 ` Dave Chinner
2023-06-08 2:03 ` Martin K. Petersen
2023-06-09 0:10 ` Dave Chinner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230522221000.603769-1-sarthakkukreti@chromium.org \
--to=sarthakkukreti@chromium.org \
--cc=adilger.kernel@dilger.ca \
--cc=agk@redhat.com \
--cc=axboe@kernel.dk \
--cc=bfoster@redhat.com \
--cc=bvanassche@google.com \
--cc=djwong@kernel.org \
--cc=dm-devel@redhat.com \
--cc=hch@infradead.org \
--cc=jasowang@redhat.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=snitzer@kernel.org \
--cc=stefanha@redhat.com \
--cc=tytso@mit.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).