From: Omar Sandoval <osandov@osandov.com>
To: linux-btrfs@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org, kernel-team@fb.com
Subject: [PATCH v3 11/11] btrfs-progs: receive: add tests for basic encoded_write send/receive
Date: Fri, 22 Jan 2021 12:47:58 -0800 [thread overview]
Message-ID: <6e36570df3d4a42b586a0e783ec062c7badafa1d.1611347859.git.osandov@osandov.com> (raw)
In-Reply-To: <cover.1611347187.git.osandov@fb.com>
From: Boris Burkov <boris@bur.io>
Adapt the existing send/receive tests by passing '-o --force-compress'
to the mount commands in a new test. After writing a few files in the
various compression formats, send/receive them with and without
--force-decompress to test both the encoded_write path and the
fallback to decode+write.
Signed-off-by: Boris Burkov <boris@bur.io>
---
.../043-receive-write-encoded/test.sh | 114 ++++++++++++++++++
1 file changed, 114 insertions(+)
create mode 100755 tests/misc-tests/043-receive-write-encoded/test.sh
diff --git a/tests/misc-tests/043-receive-write-encoded/test.sh b/tests/misc-tests/043-receive-write-encoded/test.sh
new file mode 100755
index 00000000..b9390e88
--- /dev/null
+++ b/tests/misc-tests/043-receive-write-encoded/test.sh
@@ -0,0 +1,114 @@
+#!/bin/bash
+#
+# test that we can send and receive encoded writes for three modes of
+# transparent compression: zlib, lzo, and zstd.
+
+source "$TEST_TOP/common"
+
+check_prereq mkfs.btrfs
+check_prereq btrfs
+
+setup_root_helper
+prepare_test_dev
+
+here=`pwd`
+
+# assumes the filesystem exists, and does mount, write, snapshot, send, unmount
+# for the specified encoding option
+send_one() {
+ local str
+ local subv
+ local snap
+
+ algorithm="$1"
+ shift
+ str="$1"
+ shift
+
+ subv="subv-$algorithm"
+ snap="snap-$algorithm"
+
+ run_check_mount_test_dev "-o" "compress-force=$algorithm"
+ cd "$TEST_MNT" || _fail "cannot chdir to TEST_MNT"
+
+ run_check $SUDO_HELPER "$TOP/btrfs" subvolume create "$subv"
+ run_check $SUDO_HELPER dd if=/dev/zero of="$subv/file1" bs=1M count=1
+ run_check $SUDO_HELPER dd if=/dev/zero of="$subv/file2" bs=500K count=1
+ run_check $SUDO_HELPER "$TOP/btrfs" subvolume snapshot -r "$subv" "$snap"
+ run_check $SUDO_HELPER "$TOP/btrfs" send -f "$str" "$snap" "$@"
+
+ cd "$here" || _fail "cannot chdir back to test directory"
+ run_check_umount_test_dev
+}
+
+receive_one() {
+ local str
+ str="$1"
+ shift
+
+ run_check_mkfs_test_dev
+ run_check_mount_test_dev
+ run_check $SUDO_HELPER "$TOP/btrfs" receive "$@" -v -f "$str" "$TEST_MNT"
+ run_check_umount_test_dev
+ run_check rm -f -- "$str"
+}
+
+test_one_write_encoded() {
+ local str
+ local algorithm
+ algorithm="$1"
+ shift
+ str="$here/stream-$algorithm.stream"
+
+ run_check_mkfs_test_dev
+ send_one "$algorithm" "$str" --compressed-data
+ receive_one "$str" "$@"
+}
+
+test_one_stream_v1() {
+ local str
+ local algorithm
+ algorithm="$1"
+ shift
+ str="$here/stream-$algorithm.stream"
+
+ run_check_mkfs_test_dev
+ send_one "$algorithm" "$str" --stream-version 1
+ receive_one "$str" "$@"
+}
+
+test_mix_write_encoded() {
+ local strzlib
+ local strlzo
+ local strzstd
+ strzlib="$here/stream-zlib.stream"
+ strlzo="$here/stream-lzo.stream"
+ strzstd="$here/stream-zstd.stream"
+
+ run_check_mkfs_test_dev
+
+ send_one "zlib" "$strzlib" --compressed-data
+ send_one "lzo" "$strlzo" --compressed-data
+ send_one "zstd" "$strzstd" --compressed-data
+
+ receive_one "$strzlib"
+ receive_one "$strlzo"
+ receive_one "$strzstd"
+}
+
+test_one_write_encoded "zlib"
+test_one_write_encoded "lzo"
+test_one_write_encoded "zstd"
+
+# with decompression forced
+test_one_write_encoded "zlib" "--force-decompress"
+test_one_write_encoded "lzo" "--force-decompress"
+test_one_write_encoded "zstd" "--force-decompress"
+
+# send stream v1
+test_one_stream_v1 "zlib"
+test_one_stream_v1 "lzo"
+test_one_stream_v1 "zstd"
+
+# files use a mix of compression algorithms
+test_mix_write_encoded
--
2.30.0
prev parent reply other threads:[~2021-01-22 21:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-22 20:47 [PATCH v3 0/5] btrfs: implement send/receive of compressed extents without decompressing Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 1/5] btrfs: add send stream v2 definitions Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 01/11] btrfs-progs: receive: support v2 send stream larger tlv_len Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 02/11] btrfs-progs: receive: dynamically allocate sctx->read_buf Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 2/5] btrfs: send: write larger chunks when using stream v2 Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 03/11] btrfs-progs: receive: support v2 send stream DATA tlv format Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 3/5] btrfs: send: allocate send buffer with alloc_page() and vmap() for v2 Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 04/11] btrfs-progs: receive: add send stream v2 cmds and attrs to send.h Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 4/5] btrfs: send: send compressed extents with encoded writes Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 05/11] btrfs-progs: receive: add stub implementation for pwritev2 Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 5/5] btrfs: send: enable support for stream v2 and compressed writes Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 06/11] btrfs-progs: receive: process encoded_write commands Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 07/11] btrfs-progs: receive: encoded_write fallback to explicit decode and write Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 08/11] btrfs-progs: receive: process fallocate commands Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 09/11] btrfs-progs: receive: process setflags ioctl commands Omar Sandoval
2021-01-22 20:47 ` [PATCH v3 10/11] btrfs-progs: send: stream v2 ioctl flags Omar Sandoval
2021-01-22 20:47 ` Omar Sandoval [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6e36570df3d4a42b586a0e783ec062c7badafa1d.1611347859.git.osandov@osandov.com \
--to=osandov@osandov.com \
--cc=kernel-team@fb.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).