linux-fsdevel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Mina Almasry <almasrymina@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>, Greg Thelen <gthelen@google.com>,
	Shakeel Butt <shakeelb@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Hugh Dickins <hughd@google.com>, Roman Gushchin <guro@fb.com>,
	Johannes Weiner <hannes@cmpxchg.org>, Tejun Heo <tj@kernel.org>,
	Vladimir Davydov <vdavydov.dev@gmail.com>,
	Muchun Song <songmuchun@bytedance.com>,
	riel@surriel.com, linux-mm@kvack.org,
	linux-fsdevel@vger.kernel.org, cgroups@vger.kernel.org
Subject: Re: [PATCH v3 2/4] mm/oom: handle remote ooms
Date: Tue, 16 Nov 2021 12:29:19 +0100	[thread overview]
Message-ID: <YZOWD8hP2WpqyXvI@dhcp22.suse.cz> (raw)
In-Reply-To: <CAHS8izNTbvhjEEb=ZrH2_4ECkVhxnCLzyd=78uWmHA_02iiA9Q@mail.gmail.com>

On Tue 16-11-21 02:17:09, Mina Almasry wrote:
> On Tue, Nov 16, 2021 at 1:28 AM Michal Hocko <mhocko@suse.com> wrote:
> >
> > On Mon 15-11-21 16:58:19, Mina Almasry wrote:
> > > On Mon, Nov 15, 2021 at 2:58 AM Michal Hocko <mhocko@suse.com> wrote:
> > > >
> > > > On Fri 12-11-21 09:59:22, Mina Almasry wrote:
> > > > > On Fri, Nov 12, 2021 at 12:36 AM Michal Hocko <mhocko@suse.com> wrote:
> > > > > >
> > > > > > On Fri 12-11-21 00:12:52, Mina Almasry wrote:
> > > > > > > On Thu, Nov 11, 2021 at 11:52 PM Michal Hocko <mhocko@suse.com> wrote:
> > > > > > > >
> > > > > > > > On Thu 11-11-21 15:42:01, Mina Almasry wrote:
> > > > > > > > > On remote ooms (OOMs due to remote charging), the oom-killer will attempt
> > > > > > > > > to find a task to kill in the memcg under oom, if the oom-killer
> > > > > > > > > is unable to find one, the oom-killer should simply return ENOMEM to the
> > > > > > > > > allocating process.
> > > > > > > >
> > > > > > > > This really begs for some justification.
> > > > > > > >
> > > > > > >
> > > > > > > I'm thinking (and I can add to the commit message in v4) that we have
> > > > > > > 2 reasonable options when the oom-killer gets invoked and finds
> > > > > > > nothing to kill: (1) return ENOMEM, (2) kill the allocating task. I'm
> > > > > > > thinking returning ENOMEM allows the application to gracefully handle
> > > > > > > the failure to remote charge and continue operation.
> > > > > > >
> > > > > > > For example, in the network service use case that I mentioned in the
> > > > > > > RFC proposal, it's beneficial for the network service to get an ENOMEM
> > > > > > > and continue to service network requests for other clients running on
> > > > > > > the machine, rather than get oom-killed when hitting the remote memcg
> > > > > > > limit. But, this is not a hard requirement, the network service could
> > > > > > > fork a process that does the remote charging to guard against the
> > > > > > > remote charge bringing down the entire process.
> > > > > >
> > > > > > This all belongs to the changelog so that we can discuss all potential
> > > > > > implication and do not rely on any implicit assumptions.
> > > > >
> > > > > Understood. Maybe I'll wait to collect more feedback and upload v4
> > > > > with a thorough explanation of the thought process.
> > > > >
> > > > > > E.g. why does
> > > > > > it even make sense to kill a task in the origin cgroup?
> > > > > >
> > > > >
> > > > > The behavior I saw returning ENOMEM for this edge case was that the
> > > > > code was forever looping the pagefault, and I was (seemingly
> > > > > incorrectly) under the impression that a suggestion to forever loop
> > > > > the pagefault would be completely fundamentally unacceptable.
> > > >
> > > > Well, I have to say I am not entirely sure what is the best way to
> > > > handle this situation. Another option would be to treat this similar to
> > > > ENOSPACE situation. This would result into SIGBUS IIRC.
> > > >
> > > > The main problem with OOM killer is that it will not resolve the
> > > > underlying problem in most situations. Shmem files would likely stay
> > > > laying around and their charge along with them. Killing the allocating
> > > > task has problems on its own because this could be just a DoS vector by
> > > > other unrelated tasks sharing the shmem mount point without a gracefull
> > > > fallback. Retrying the page fault is hard to detect. SIGBUS might be
> > > > something that helps with the latest. The question is how to communicate
> > > > this requerement down to the memcg code to know that the memory reclaim
> > > > should happen (Should it? How hard we should try?) but do not invoke the
> > > > oom killer. The more I think about this the nastier this is.
> > >
> > > So actually I thought the ENOSPC suggestion was interesting so I took
> > > the liberty to prototype it. The changes required:
> > >
> > > 1. In out_of_memory() we return false if !oc->chosen &&
> > > is_remote_oom(). This gets bubbled up to try_charge_memcg() as
> > > mem_cgroup_oom() returning OOM_FAILED.
> > > 2. In try_charge_memcg(), if we get an OOM_FAILED we again check
> > > is_remote_oom(), if it is a remote oom, return ENOSPC.
> > > 3. The calling code would return ENOSPC to the user in the no-fault
> > > path, and SIGBUS the user in the fault path with no changes.
> >
> > I think this should be implemented at the caller side rather than
> > somehow hacked into the memcg core. It is the caller to know what to do.
> > The caller can use gfp flags to control the reclaim behavior.
> >
> 
> Hmm I'm a bit struggling to envision this.  So would it be acceptable
> at the call sites where we doing a remote charge, such as
> shmem_add_to_page_cache(), if we get ENOMEM from the
> mem_cgroup_charge(), and we know we're doing a remote charge (because
> current's memcg != the super block memcg), then we return ENOSPC from
> shmem_add_to_page_cache()? I believe that will return ENOSPC to the
> userspace in the non-pagefault path and SIGBUS in the pagefault path.
> Or you had something else in mind?

Yes, exactly. I meant that all this special casing would be done at the
shmem layer as it knows how to communicate this usecase.

[...]

> > And just a small clarification. Tmpfs is fundamentally problematic from
> > the OOM handling POV. The nuance here is that the OOM happens in a
> > different memcg and thus a different resource domain. If you kill a task
> > in the target memcg then you effectively DoS that workload. If you kill
> > the allocating task then it is DoSed by anybody allowed to write to that
> > shmem. All that without a graceful fallback.
> 
> I don't know if this addresses your concern, but I'm limiting the
> memcg= use to processes that can enter that memcg. Therefore they
> would be able to allocate memory in that memcg anyway by entering it.
> So if they wanted to intentionally DoS that memcg they can already do
> it without this feature.

Can you elaborate some more? How do you enforce that the mount point
cannot be accessed by anybody outside of that constraint?
-- 
Michal Hocko
SUSE Labs

  reply	other threads:[~2021-11-16 11:29 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20211111234203.1824138-1-almasrymina@google.com>
2021-11-11 23:42 ` [PATCH v3 1/4] mm/shmem: support deterministic charging of tmpfs Mina Almasry
2021-11-11 23:42 ` [PATCH v3 2/4] mm/oom: handle remote ooms Mina Almasry
2021-11-12  7:51   ` Michal Hocko
2021-11-12  8:12     ` Mina Almasry
2021-11-12  8:36       ` Michal Hocko
2021-11-12 17:59         ` Mina Almasry
2021-11-15 10:58           ` Michal Hocko
2021-11-15 17:32             ` Shakeel Butt
2021-11-16  0:58             ` Mina Almasry
2021-11-16  9:28               ` Michal Hocko
2021-11-16  9:39                 ` Michal Hocko
2021-11-16 10:17                 ` Mina Almasry
2021-11-16 11:29                   ` Michal Hocko [this message]
2021-11-16 21:27                     ` Mina Almasry
2021-11-16 21:55                       ` Shakeel Butt
2021-11-18  8:48                         ` Michal Hocko
2021-11-19 22:32                           ` Mina Almasry
2021-11-18  8:47                       ` Michal Hocko
2021-11-11 23:42 ` [PATCH v3 3/4] mm, shmem: add tmpfs memcg= option documentation Mina Almasry
2021-11-11 23:42 ` [PATCH v3 4/4] mm, shmem, selftests: add tmpfs memcg= mount option tests Mina Almasry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YZOWD8hP2WpqyXvI@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=almasrymina@google.com \
    --cc=cgroups@vger.kernel.org \
    --cc=gthelen@google.com \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=riel@surriel.com \
    --cc=shakeelb@google.com \
    --cc=songmuchun@bytedance.com \
    --cc=tj@kernel.org \
    --cc=tytso@mit.edu \
    --cc=vdavydov.dev@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).