From: Hongwei Zhang <hongweiz@ami.com>
To: Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
Linus Walleij <linus.walleij@linaro.org>,
<devicetree@vger.kernel.org>
Cc: Hongwei Zhang <hongweiz@ami.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-gpio@vger.kernel.org>
Subject: [PATCH 2/3 v2] dt-bindings: gpio: aspeed: Add SGPIO support
Date: Fri, 12 Jul 2019 16:14:00 -0400 [thread overview]
Message-ID: <1562962440-15908-1-git-send-email-hongweiz@ami.com> (raw)
Add bindings to support SGPIO on AST2400 or AST2500.
Signed-off-by: Hongwei Zhang <hongweiz@ami.com>
---
.../devicetree/bindings/gpio/sgpio-aspeed.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100755 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
new file mode 100755
index 0000000..3ae2b79
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
@@ -0,0 +1,43 @@
+Aspeed SGPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Either "aspeed,ast2400-sgpio" or "aspeed,ast2500-sgpio"
+
+- #gpio-cells : Should be two
+ - First cell is the GPIO line number
+ - Second cell is used to specify optional
+ parameters (unused)
+
+- reg : Address and length of the register set for the device
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt specifier (see interrupt bindings for
+ details)
+
+- interrupt-controller : Mark the GPIO controller as an interrupt-controller
+
+- nr-gpios : number of GPIO pins to serialise. (should be multiple of 8, up to 80 pins)
+ if not specified, defaults to 80.
+
+- clocks : A phandle to the APB clock for SGPM clock division
+
+- bus-frequency : SGPM CLK frequency, if not specified defaults to 1 MHz
+
+
+The sgpio and interrupt properties are further described in their respective bindings documentation:
+
+- Documentation/devicetree/bindings/sgpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+ Example:
+ sgpio@1e780200 {
+ #gpio-cells = <2>;
+ compatible = "aspeed,ast2500-sgpio";
+ gpio-controller;
+ interrupts = <40>;
+ reg = <0x1e780200 0x0100>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ interrupt-controller;
+ nr-gpios = <80>;
+ bus-frequency = <1000000>;
+ };
--
2.7.4
next reply other threads:[~2019-07-12 20:14 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-12 20:14 Hongwei Zhang [this message]
2019-07-15 2:25 ` [PATCH 2/3 v2] dt-bindings: gpio: aspeed: Add SGPIO support Andrew Jeffery
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1562962440-15908-1-git-send-email-hongweiz@ami.com \
--to=hongweiz@ami.com \
--cc=andrew@aj.id.au \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).