Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* Re: [PATCH] irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map
       [not found] <20200724184157.29150-1-f.fainelli@gmail.com>
@ 2020-07-25 14:23 ` Marc Zyngier
  0 siblings, 0 replies; only message in thread
From: Marc Zyngier @ 2020-07-25 14:23 UTC (permalink / raw)
  To: Jason Cooper, Alexandre Torgue, Thomas Gleixner,
	Florian Fainelli, linux-kernel
  Cc: linux-gpio, marex, linux-stm32, linux-arm-kernel,
	kernel test robot, Justin Chen,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE,
	open list:BROADCOM BMIPS MIPS ARCHITECTURE

On Fri, 24 Jul 2020 11:41:56 -0700, Florian Fainelli wrote:
> cpu_logical_map is only defined for CONFIG_SMP builds, when we are in an
> UP configuration, the boot CPU is 0.

Applied to irq/irqchip-5.9, thanks!

[1/1] irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map
      commit: 29a190b6a2bd9ef4282e2f73e7abd76203740150

Cheers,

	M.
-- 
Without deviation from the norm, progress is not possible.



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20200724184157.29150-1-f.fainelli@gmail.com>
2020-07-25 14:23 ` [PATCH] irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map Marc Zyngier

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git