Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 14/10/2022 18:10, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.
> 
> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
> ---
>  .../pinctrl/qcom,qdu1000-pinctrl.yaml         | 159 ++++++++++++++++++
>  1 file changed, 159 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
> new file mode 100644
> index 000000000000..2ec661e5e1e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml

Filename matching compatible, so qcom,qdu1000-tlmm.yaml

> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
> +
> +maintainers:
> +  - Melody Olvera <quic_molvera@quicinc.com>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block (TLMM) found
> +  in the QDU1000 and QRU1000 platforms.
> +
> +allOf:
> +  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: qcom,qdu1000-tlmm
> +      - const: qcom,qru1000-tlmm
> +
> +  reg:
> +    maxItems: 1

Blank line

> +  interrupts: true
> +  interrupt-controller: true
> +  "#interrupt-cells": true
> +  gpio-controller: true
> +
> +  gpio-reserved-ranges:
> +    minItems: 1
> +    maxItems: 75
> +
> +  gpio-line-names:
> +    maxItems: 150
> +
> +  "#gpio-cells": true
> +  gpio-ranges: true
> +  wakeup-parent: true
> +
> +patternProperties:
> +  "-state$":
> +    oneOf:
> +      - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> +      - patternProperties:
> +          "-pins$":
> +            $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> +        additionalProperties: false
> +
> +$defs:
> +  qcom-qdu1000-tlmm-state:
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.
> +    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> +    properties:
> +      pins:
> +        description:
> +          List of gpio pins affected by the properties specified in this
> +          subnode.
> +        items:
> +          oneOf:
> +            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
> +            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
> +        minItems: 1
> +        maxItems: 36
> +
> +      function:
> +        description:
> +          Specify the alternative function to be configured for the specified
> +          pins.
> +        enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
> +                atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
> +                atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
> +                audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
> +                cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
> +                cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
> +                ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
> +                gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
> +                lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
> +                mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
> +                pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
> +                pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
> +                qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
> +                qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
> +                qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
> +                sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
> +                spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
> +                tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
> +                tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
> +                tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
> +                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
> +                uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
> +                wlan1_adc1, wlan2_adc0, wlan2_adc1]
> +
> +      bias-disable: true
> +      bias-pull-down: true
> +      bias-pull-up: true
> +      drive-strength: true
> +      input-enable: true
> +      output-high: true
> +      output-low: true
> +
> +    required:
> +      - pins
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    pinctrl@03000000 {
> +        compatible = "qcom,qdu1000-pinctrl";
> +        reg = <0x03000000 0xdc2000>;
> +        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +        gpio-ranges = <&tlmm 0 0 151>;
> +        wakeup-parent = <&pdc_intc>;
> +
> +        cci0-default-state {

You have now bindings for your new SoC and you still did not run them
against your own DTS... The purpose of DT schema is not only to have
them, but actually to use them.

There is no point for us to do manual review if automated tools can do
the work, right?

So please test your DTS.

Best regards,
Krzysztof