Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v1 1/3] gpio: mpc8xxx: add ls1088a platform gpio node DT binding description
@ 2019-08-08 10:16 Hui Song
  2019-08-08 10:16 ` [PATCH v1 2/3] arm64: dts: fix gpio node Hui Song
                   ` (3 more replies)
  0 siblings, 4 replies; 7+ messages in thread
From: Hui Song @ 2019-08-08 10:16 UTC (permalink / raw)
  To: Shawn Guo, Li Yang, Rob Herring, Mark Rutland, Linus Walleij,
	Bartosz Golaszewski
  Cc: linux-arm-kernel, devicetree, linux-kernel, linux-gpio, Song Hui

From: Song Hui <hui.song_1@nxp.com>

ls1088a and ls1028a platform share common gpio node.

Signed-off-by: Song Hui <hui.song_1@nxp.com>
---
 Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index baf95d9..cd28e93 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible : Should be "fsl,<soc>-gpio"
   The following <soc>s are known to be supported:
 	mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq,
-	ls1021a, ls1043a, ls2080a, ls1028a.
+	ls1021a, ls1043a, ls2080a, ls1028a, ls1088a.
 - reg : Address and length of the register set for the device
 - interrupts : Should be the port interrupt shared by all 32 pins.
 - #gpio-cells : Should be two.  The first cell is the pin number and
@@ -39,10 +39,10 @@ gpio0: gpio@2300000 {
 };
 
 
-Example of gpio-controller node for a ls1028a SoC:
+Example of gpio-controller node for a ls1028a/ls1088a SoC:
 
 gpio1: gpio@2300000 {
-	compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+	compatible = "fsl,ls1028a-gpio", "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 	reg = <0x0 0x2300000 0x0 0x10000>;
 	interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 	gpio-controller;
-- 
2.9.5


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-08 10:16 [PATCH v1 1/3] gpio: mpc8xxx: add ls1088a platform gpio node DT binding description Hui Song
2019-08-08 10:16 ` [PATCH v1 2/3] arm64: dts: fix gpio node Hui Song
2019-08-12 15:27   ` Shawn Guo
2019-08-08 10:16 ` [PATCH v1 3/3] gpio: mpc8xxx: add ls1088a platform special function Hui Song
2019-08-23  7:38   ` Linus Walleij
2019-08-21 20:53 ` [PATCH v1 1/3] gpio: mpc8xxx: add ls1088a platform gpio node DT binding description Rob Herring
2019-08-23  7:37 ` Linus Walleij

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org linux-gpio@archiver.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox