Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-gpio@vger.kernel.org
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>, Dong Aisheng <aisheng.dong@nxp.com>,
	Stefan Agner <stefan@agner.ch>,
	Thierry Reding <treding@nvidia.com>
Subject: [PATCH] gpio: vf610: Pass irqchip when adding gpiochip
Date: Fri,  9 Aug 2019 16:19:16 +0200
Message-ID: <20190809141916.20999-1-linus.walleij@linaro.org> (raw)

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpio-vf610.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 7ba668db171b..58776f2d69ff 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -243,6 +243,7 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	struct device_node *np = dev->of_node;
 	struct vf610_gpio_port *port;
 	struct gpio_chip *gc;
+	struct gpio_irq_chip *girq;
 	struct irq_chip *ic;
 	int i;
 	int ret;
@@ -318,10 +319,6 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	ic->irq_set_type = vf610_gpio_irq_set_type;
 	ic->irq_set_wake = vf610_gpio_irq_set_wake;
 
-	ret = devm_gpiochip_add_data(dev, gc, port);
-	if (ret < 0)
-		return ret;
-
 	/* Mask all GPIO interrupts */
 	for (i = 0; i < gc->ngpio; i++)
 		vf610_gpio_writel(0, port->base + PORT_PCR(i));
@@ -329,15 +326,20 @@ static int vf610_gpio_probe(struct platform_device *pdev)
 	/* Clear the interrupt status register for all GPIO's */
 	vf610_gpio_writel(~0, port->base + PORT_ISFR);
 
-	ret = gpiochip_irqchip_add(gc, ic, 0, handle_edge_irq, IRQ_TYPE_NONE);
-	if (ret) {
-		dev_err(dev, "failed to add irqchip\n");
-		return ret;
-	}
-	gpiochip_set_chained_irqchip(gc, ic, port->irq,
-				     vf610_gpio_irq_handler);
+	girq = &gc->irq;
+	girq->chip = ic;
+	girq->parent_handler = vf610_gpio_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = port->irq;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_edge_irq;
 
-	return 0;
+	return devm_gpiochip_add_data(dev, gc, port);
 }
 
 static struct platform_driver vf610_gpio_driver = {
-- 
2.21.0


                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809141916.20999-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=aisheng.dong@nxp.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=bgolaszewski@baylibre.com \
    --cc=linux-gpio@vger.kernel.org \
    --cc=stefan@agner.ch \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git