[PATCH] gpio: intel-mid: Pass irqchip when adding gpiochip

[PATCH] gpio: intel-mid: Pass irqchip when adding gpiochip

[Linus Walleij]

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: David Cohen <david.a.cohen@linux.intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Andy: when you're happy with this you can either supply an
ACK and I will merge it or you can merge it into your tree
for a later pull request, just tell me what you prefer.
---
 drivers/gpio/gpio-intel-mid.c | 35 +++++++++++++++++------------------
 1 file changed, 17 insertions(+), 18 deletions(-)

diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
index 4e803baf980e..1f5c9d21db0b 100644
--- a/drivers/gpio/gpio-intel-mid.c
+++ b/drivers/gpio/gpio-intel-mid.c
@@ -329,6 +329,7 @@ static int intel_gpio_probe(struct pci_dev *pdev,
 	u32 gpio_base;
 	u32 irq_base;
 	int retval;
+	struct gpio_irq_chip *girq;
 	struct intel_mid_gpio_ddata *ddata =
 				(struct intel_mid_gpio_ddata *)id->driver_data;
 
@@ -369,6 +370,22 @@ static int intel_gpio_probe(struct pci_dev *pdev,
 
 	spin_lock_init(&priv->lock);
 
+	girq = &priv->chip.irq;
+	girq->chip = &intel_mid_irqchip;
+	girq->parent_handler = intel_mid_irq_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = pdev->irq;
+	girq->first = irq_base;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_simple_irq;
+
+	intel_mid_irq_init_hw(priv);
+
 	pci_set_drvdata(pdev, priv);
 	retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
 	if (retval) {
@@ -376,24 +393,6 @@ static int intel_gpio_probe(struct pci_dev *pdev,
 		return retval;
 	}
 
-	retval = gpiochip_irqchip_add(&priv->chip,
-				      &intel_mid_irqchip,
-				      irq_base,
-				      handle_simple_irq,
-				      IRQ_TYPE_NONE);
-	if (retval) {
-		dev_err(&pdev->dev,
-			"could not connect irqchip to gpiochip\n");
-		return retval;
-	}
-
-	intel_mid_irq_init_hw(priv);
-
-	gpiochip_set_chained_irqchip(&priv->chip,
-				     &intel_mid_irqchip,
-				     pdev->irq,
-				     intel_mid_irq_handler);
-
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_allow(&pdev->dev);
 
-- 
2.21.0

Re: [PATCH] gpio: intel-mid: Pass irqchip when adding gpiochip

[Andy Shevchenko]

On Sun, Aug 11, 2019 at 10:05:39AM +0200, Linus Walleij wrote:
> We need to convert all old gpio irqchips to pass the irqchip
> setup along when adding the gpio_chip. For more info see
> drivers/gpio/TODO.
> 
> For chained irqchips this is a pretty straight-forward
> conversion.
> 

Same comments as per lynxpoint.

-- 
With Best Regards,
Andy Shevchenko