Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Thierry Reding <thierry.reding@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: jonathanh@nvidia.com, tglx@linutronix.de, jason@lakedaemon.net,
	marc.zyngier@arm.com, linus.walleij@linaro.org, stefan@agner.ch,
	mark.rutland@arm.com, pdeschrijver@nvidia.com,
	pgaikwad@nvidia.com, sboyd@kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, jckuo@nvidia.com, josephl@nvidia.com,
	talho@nvidia.com, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org, mperttunen@nvidia.com,
	spatra@nvidia.com, robh+dt@kernel.org, digetx@gmail.com,
	devicetree@vger.kernel.org, rjw@rjwysocki.net,
	viresh.kumar@linaro.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH v8 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU
Date: Mon, 12 Aug 2019 11:53:43 +0200
Message-ID: <20190812095343.GH8903@ulmo> (raw)
In-Reply-To: <1565308020-31952-10-git-send-email-skomatineni@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 6124 bytes --]

On Thu, Aug 08, 2019 at 04:46:48PM -0700, Sowjanya Komatineni wrote:
> This patch has a fix to enable PLLP branches to CPU before changing
> the CPU cluster clock source to PLLP for Gen5 Super clock and
> disables PLLP branches to CPU when not in use.
> 
> During system suspend entry and exit, CPU source will be switched
> to PLLP and this needs PLLP branches to be enabled to CPU prior to
> the switch.
> 
> On system resume, warmboot code enables PLLP branches to CPU and
> powers up the CPU with PLLP clock source.
> 
> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
> ---
>  drivers/clk/tegra/clk-super.c            | 14 ++++++++++++++
>  drivers/clk/tegra/clk-tegra-super-gen4.c |  7 ++++++-
>  drivers/clk/tegra/clk.c                  | 14 ++++++++++++++
>  drivers/clk/tegra/clk.h                  |  5 +++++
>  4 files changed, 39 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/tegra/clk-super.c b/drivers/clk/tegra/clk-super.c
> index 39ef31b46df5..e2a1e95a8db7 100644
> --- a/drivers/clk/tegra/clk-super.c
> +++ b/drivers/clk/tegra/clk-super.c
> @@ -28,6 +28,9 @@
>  #define super_state_to_src_shift(m, s) ((m->width * s))
>  #define super_state_to_src_mask(m) (((1 << m->width) - 1))
>  
> +#define CCLK_SRC_PLLP_OUT0 4
> +#define CCLK_SRC_PLLP_OUT4 5
> +
>  static u8 clk_super_get_parent(struct clk_hw *hw)
>  {
>  	struct tegra_clk_super_mux *mux = to_clk_super_mux(hw);
> @@ -97,12 +100,23 @@ static int clk_super_set_parent(struct clk_hw *hw, u8 index)
>  		if (index == mux->div2_index)
>  			index = mux->pllx_index;
>  	}
> +
> +	/* enable PLLP branches to CPU before selecting PLLP source */
> +	if ((mux->flags & TEGRA210_CPU_CLK) &&
> +	    (index == CCLK_SRC_PLLP_OUT0 || index == CCLK_SRC_PLLP_OUT4))
> +		tegra_clk_set_pllp_out_cpu(true);
> +
>  	val &= ~((super_state_to_src_mask(mux)) << shift);
>  	val |= (index & (super_state_to_src_mask(mux))) << shift;
>  
>  	writel_relaxed(val, mux->reg);
>  	udelay(2);
>  
> +	/* disable PLLP branches to CPU if not used */
> +	if ((mux->flags & TEGRA210_CPU_CLK) &&
> +	    index != CCLK_SRC_PLLP_OUT0 && index != CCLK_SRC_PLLP_OUT4)
> +		tegra_clk_set_pllp_out_cpu(false);
> +
>  out:
>  	if (mux->lock)
>  		spin_unlock_irqrestore(mux->lock, flags);
> diff --git a/drivers/clk/tegra/clk-tegra-super-gen4.c b/drivers/clk/tegra/clk-tegra-super-gen4.c
> index cdfe7c9697e1..98538f79b0c4 100644
> --- a/drivers/clk/tegra/clk-tegra-super-gen4.c
> +++ b/drivers/clk/tegra/clk-tegra-super-gen4.c
> @@ -180,7 +180,7 @@ static void __init tegra_super_clk_init(void __iomem *clk_base,
>  					gen_info->num_cclk_g_parents,
>  					CLK_SET_RATE_PARENT,
>  					clk_base + CCLKG_BURST_POLICY,
> -					0, 4, 8, 0, NULL);
> +					TEGRA210_CPU_CLK, 4, 8, 0, NULL);
>  		} else {
>  			clk = tegra_clk_register_super_mux("cclk_g",
>  					gen_info->cclk_g_parents,
> @@ -196,6 +196,11 @@ static void __init tegra_super_clk_init(void __iomem *clk_base,
>  	dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_lp, tegra_clks);
>  	if (dt_clk) {
>  		if (gen_info->gen == gen5) {
> +		/*
> +		 * TEGRA210_CPU_CLK flag is not needed for cclk_lp as cluster
> +		 * switching is not currently supported on Tegra210 and also
> +		 * cpu_lp is not used.
> +		 */

Indentation looks odd here. If you want to comment the whole block, put
the comment above the "if (...) {". If you want to comment the contents
of the block, indent one level further so it aligns with the "clk = ..."
below.

Otherwise looks good, so with the indentation fixed:

Acked-by: Thierry Reding <treding@nvidia.com>

>  			clk = tegra_clk_register_super_mux("cclk_lp",
>  					gen_info->cclk_lp_parents,
>  					gen_info->num_cclk_lp_parents,
> diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c
> index 573e3c967ae1..eb08047fd02f 100644
> --- a/drivers/clk/tegra/clk.c
> +++ b/drivers/clk/tegra/clk.c
> @@ -23,6 +23,7 @@
>  #define CLK_OUT_ENB_W			0x364
>  #define CLK_OUT_ENB_X			0x280
>  #define CLK_OUT_ENB_Y			0x298
> +#define CLK_ENB_PLLP_OUT_CPU		BIT(31)
>  #define CLK_OUT_ENB_SET_L		0x320
>  #define CLK_OUT_ENB_CLR_L		0x324
>  #define CLK_OUT_ENB_SET_H		0x328
> @@ -199,6 +200,19 @@ const struct tegra_clk_periph_regs *get_reg_bank(int clkid)
>  	}
>  }
>  
> +void tegra_clk_set_pllp_out_cpu(bool enable)
> +{
> +	u32 val;
> +
> +	val = readl_relaxed(clk_base + CLK_OUT_ENB_Y);
> +	if (enable)
> +		val |= CLK_ENB_PLLP_OUT_CPU;
> +	else
> +		val &= ~CLK_ENB_PLLP_OUT_CPU;
> +
> +	writel_relaxed(val, clk_base + CLK_OUT_ENB_Y);
> +}
> +
>  struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
>  {
>  	clk_base = regs;
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 8a9af45b6084..560e2bcb3d7d 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -677,6 +677,9 @@ struct clk *tegra_clk_register_periph_data(void __iomem *clk_base,
>   * Flags:
>   * TEGRA_DIVIDER_2 - LP cluster has additional divider. This flag indicates
>   *     that this is LP cluster clock.
> + * TEGRA210_CPU_CLK - This flag is used to identify CPU cluster for gen5
> + * super mux parent using PLLP branches. To use PLLP branches to CPU, need
> + * to configure additional bit PLLP_OUT_CPU in the clock registers.
>   */
>  struct tegra_clk_super_mux {
>  	struct clk_hw	hw;
> @@ -693,6 +696,7 @@ struct tegra_clk_super_mux {
>  #define to_clk_super_mux(_hw) container_of(_hw, struct tegra_clk_super_mux, hw)
>  
>  #define TEGRA_DIVIDER_2 BIT(0)
> +#define TEGRA210_CPU_CLK BIT(1)
>  
>  extern const struct clk_ops tegra_clk_super_ops;
>  struct clk *tegra_clk_register_super_mux(const char *name,
> @@ -838,6 +842,7 @@ int tegra_pll_p_div_to_hw(struct tegra_clk_pll *pll, u8 p_div);
>  int div_frac_get(unsigned long rate, unsigned parent_rate, u8 width,
>  		 u8 frac_width, u8 flags);
>  void tegra_clk_osc_resume(void __iomem *clk_base);
> +void tegra_clk_set_pllp_out_cpu(bool enable);
>  
>  
>  /* Combined read fence with delay */
> -- 
> 2.7.4
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  parent reply index

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08 23:46 [PATCH v8 00/21] SC7 entry and exit support for Tegra210 Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 01/21] pinctrl: tegra: Fix write barrier placement in pmx_writel Sowjanya Komatineni
2019-08-09 11:38   ` Dmitry Osipenko
2019-08-12  9:20   ` Thierry Reding
2019-08-14  8:32   ` Linus Walleij
2019-08-08 23:46 ` [PATCH v8 02/21] pinctrl: tegra: Add write barrier after all pinctrl register writes Sowjanya Komatineni
2019-08-09 11:39   ` Dmitry Osipenko
2019-08-12  9:20   ` Thierry Reding
2019-08-14  8:33   ` Linus Walleij
2019-08-08 23:46 ` [PATCH v8 03/21] clk: tegra: divider: Save and restore divider rate Sowjanya Komatineni
2019-08-12  9:21   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 04/21] clk: tegra: pllout: Save and restore pllout context Sowjanya Komatineni
2019-08-11 18:04   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 05/21] clk: tegra: pll: Save and restore pll context Sowjanya Komatineni
2019-08-09 11:33   ` Dmitry Osipenko
2019-08-09 17:39     ` Sowjanya Komatineni
2019-08-09 17:50       ` Dmitry Osipenko
2019-08-09 18:50         ` Sowjanya Komatineni
2019-08-11 17:24           ` Dmitry Osipenko
2019-08-09 12:46   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 06/21] clk: tegra: Support for OSC context save and restore Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 07/21] clk: Add API to get index of the clock parent Sowjanya Komatineni
2019-08-09 11:49   ` Dmitry Osipenko
2019-08-12  9:47   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 08/21] clk: tegra: periph: Add restore_context support Sowjanya Komatineni
2019-08-09 11:55   ` Dmitry Osipenko
2019-08-09 12:20     ` Dmitry Osipenko
2019-08-09 16:55       ` Sowjanya Komatineni
2019-08-12  9:50   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU Sowjanya Komatineni
2019-08-09 12:11   ` Dmitry Osipenko
2019-08-12  9:53   ` Thierry Reding [this message]
2019-08-08 23:46 ` [PATCH v8 10/21] clk: tegra: clk-super: Add restore-context support Sowjanya Komatineni
2019-08-09 12:17   ` Dmitry Osipenko
2019-08-09 17:08     ` Sowjanya Komatineni
2019-08-11 17:29       ` Dmitry Osipenko
2019-08-12  9:55   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 11/21] clk: tegra: clk-dfll: Add suspend and resume support Sowjanya Komatineni
2019-08-09 12:23   ` Dmitry Osipenko
2019-08-09 16:39     ` Sowjanya Komatineni
2019-08-09 18:00       ` Dmitry Osipenko
2019-08-09 18:33         ` Sowjanya Komatineni
2019-08-09 18:52           ` Dmitry Osipenko
2019-08-12 10:01   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 12/21] cpufreq: tegra124: " Sowjanya Komatineni
2019-08-12 10:07   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 13/21] clk: tegra210: Use fence_udelay during PLLU init Sowjanya Komatineni
2019-08-11 18:02   ` Dmitry Osipenko
2019-08-11 19:16     ` Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 14/21] clk: tegra210: Add suspend and resume support Sowjanya Komatineni
2019-08-09 13:56   ` Dmitry Osipenko
2019-08-09 16:19     ` Sowjanya Komatineni
2019-08-09 18:18       ` Dmitry Osipenko
     [not found]         ` <cbe94f84-a17b-7e1a-811d-89db571784e1@nvidia.com>
2019-08-11 17:39           ` Dmitry Osipenko
2019-08-11 19:15             ` Sowjanya Komatineni
2019-08-12 16:25               ` Dmitry Osipenko
2019-08-12 17:28                 ` Sowjanya Komatineni
2019-08-12 18:19                   ` Dmitry Osipenko
2019-08-12 19:03                     ` Sowjanya Komatineni
2019-08-12 20:28                       ` Dmitry Osipenko
2019-08-12 10:17   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 15/21] soc/tegra: pmc: Allow to support more tegras wake Sowjanya Komatineni
2019-08-11 17:52   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 16/21] soc/tegra: pmc: Add pmc wake support for tegra210 Sowjanya Komatineni
2019-08-09 13:28   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 17/21] arm64: tegra: Enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 18/21] soc/tegra: pmc: Configure core power request polarity Sowjanya Komatineni
2019-08-09 13:13   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 19/21] soc/tegra: pmc: Configure deep sleep control settings Sowjanya Komatineni
2019-08-09 13:23   ` Dmitry Osipenko
2019-08-09 16:23     ` Sowjanya Komatineni
2019-08-09 17:24       ` Sowjanya Komatineni
2019-08-09 18:22         ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 20/21] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings Sowjanya Komatineni
2019-08-08 23:47 ` [PATCH v8 21/21] arm64: dts: tegra210-p3450: Jetson Nano " Sowjanya Komatineni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190812095343.GH8903@ulmo \
    --to=thierry.reding@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=digetx@gmail.com \
    --cc=jason@lakedaemon.net \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=skomatineni@nvidia.com \
    --cc=spatra@nvidia.com \
    --cc=stefan@agner.ch \
    --cc=talho@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org linux-gpio@archiver.kernel.org
	public-inbox-index linux-gpio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox