Linux-GPIO Archive on
 help / color / Atom feed
* [PATCH v3 0/5] Add ast2600 gpio support
@ 2019-09-06  6:25 Rashmica Gupta
  0 siblings, 0 replies; only message in thread
From: Rashmica Gupta @ 2019-09-06  6:25 UTC (permalink / raw)
  To: linus.walleij
  Cc: Rashmica Gupta, Bartosz Golaszewski, Rob Herring, Mark Rutland,
	Joel Stanley, Andrew Jeffery, linux-gpio, devicetree,
	linux-arm-kernel, linux-aspeed, linux-kernel

v3: Different ordering of patches, using ngpio property to distinguish between
the two ast2600 gpio controllers, fixed typos of 3.6V.

v2: More verbose commit messages, using DIV_ROUND_UP().

Rashmica Gupta (5):
  dt-bindings: gpio: aspeed: Update documentation with ast2600
  gpio/aspeed: Fix incorrect number of banks
  gpio/aspeed: Setup irqchip dynamically
  gpios: Use ngpio property from device tree if available
  gpio: Add in ast2600 details to Aspeed driver

 drivers/gpio/gpio-aspeed.c                    | 52 ++++++++++++-------
 .../devicetree/bindings/gpio/gpio-aspeed.txt  |  7 ++-
 2 files changed, 39 insertions(+), 20 deletions(-)


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-06  6:25 [PATCH v3 0/5] Add ast2600 gpio support Rashmica Gupta

Linux-GPIO Archive on

Archives are clonable:
	git clone --mirror linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ \
	public-inbox-index linux-gpio

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox