From: Jianqun Xu <jay.xu@rock-chips.com>
To: linus.walleij@linaro.org, robh+dt@kernel.org,
mark.rutland@arm.com, heiko@sntech.de,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Jianqun Xu <jay.xu@rock-chips.com>
Subject: [PATCH v2 2/2] pinctrl: rockchip: add rk3308 SoC support
Date: Mon, 14 Oct 2019 11:04:08 +0800 [thread overview]
Message-ID: <20191014030408.18914-1-jay.xu@rock-chips.com> (raw)
In-Reply-To: <20191012061528.27821-1-jay.xu@rock-chips.com>
This patch do support pinctrl for RK3308 SoCs.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
---
changes since v1:
- Add type case for pull get/set
- Add Reviewed-by: Heiko Stuebner <heiko@sntech.de>
drivers/pinctrl/pinctrl-rockchip.c | 379 +++++++++++++++++++++++++++++
1 file changed, 379 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index dc0bbf198cbc..15eff9676ad0 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -58,6 +58,7 @@ enum rockchip_pinctrl_type {
RK3128,
RK3188,
RK3288,
+ RK3308,
RK3368,
RK3399,
};
@@ -70,6 +71,7 @@ enum rockchip_pinctrl_type {
#define IOMUX_SOURCE_PMU BIT(2)
#define IOMUX_UNROUTED BIT(3)
#define IOMUX_WIDTH_3BIT BIT(4)
+#define IOMUX_WIDTH_2BIT BIT(5)
/**
* @type: iomux variant using IOMUX_* constants
@@ -656,6 +658,100 @@ static struct rockchip_mux_recalced_data rk3128_mux_recalced_data[] = {
},
};
+static struct rockchip_mux_recalced_data rk3308_mux_recalced_data[] = {
+ {
+ .num = 1,
+ .pin = 14,
+ .reg = 0x28,
+ .bit = 12,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 15,
+ .reg = 0x2c,
+ .bit = 0,
+ .mask = 0x3
+ }, {
+ .num = 1,
+ .pin = 18,
+ .reg = 0x30,
+ .bit = 4,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 19,
+ .reg = 0x30,
+ .bit = 8,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 20,
+ .reg = 0x30,
+ .bit = 12,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 21,
+ .reg = 0x34,
+ .bit = 0,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 22,
+ .reg = 0x34,
+ .bit = 4,
+ .mask = 0xf
+ }, {
+ .num = 1,
+ .pin = 23,
+ .reg = 0x34,
+ .bit = 8,
+ .mask = 0xf
+ }, {
+ .num = 3,
+ .pin = 12,
+ .reg = 0x68,
+ .bit = 8,
+ .mask = 0xf
+ }, {
+ .num = 3,
+ .pin = 13,
+ .reg = 0x68,
+ .bit = 12,
+ .mask = 0xf
+ }, {
+ .num = 2,
+ .pin = 2,
+ .reg = 0x608,
+ .bit = 0,
+ .mask = 0x7
+ }, {
+ .num = 2,
+ .pin = 3,
+ .reg = 0x608,
+ .bit = 4,
+ .mask = 0x7
+ }, {
+ .num = 2,
+ .pin = 16,
+ .reg = 0x610,
+ .bit = 8,
+ .mask = 0x7
+ }, {
+ .num = 3,
+ .pin = 10,
+ .reg = 0x610,
+ .bit = 0,
+ .mask = 0x7
+ }, {
+ .num = 3,
+ .pin = 11,
+ .reg = 0x610,
+ .bit = 4,
+ .mask = 0x7
+ },
+};
+
static struct rockchip_mux_recalced_data rk3328_mux_recalced_data[] = {
{
.num = 2,
@@ -982,6 +1078,192 @@ static struct rockchip_mux_route_data rk3288_mux_route_data[] = {
},
};
+static struct rockchip_mux_route_data rk3308_mux_route_data[] = {
+ {
+ /* rtc_clk */
+ .bank_num = 0,
+ .pin = 19,
+ .func = 1,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 0) | BIT(0),
+ }, {
+ /* uart2_rxm0 */
+ .bank_num = 1,
+ .pin = 22,
+ .func = 2,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 2) | BIT(16 + 3),
+ }, {
+ /* uart2_rxm1 */
+ .bank_num = 4,
+ .pin = 26,
+ .func = 2,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 2) | BIT(16 + 3) | BIT(2),
+ }, {
+ /* i2c3_sdam0 */
+ .bank_num = 0,
+ .pin = 15,
+ .func = 2,
+ .route_offset = 0x608,
+ .route_val = BIT(16 + 8) | BIT(16 + 9),
+ }, {
+ /* i2c3_sdam1 */
+ .bank_num = 3,
+ .pin = 12,
+ .func = 2,
+ .route_offset = 0x608,
+ .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(8),
+ }, {
+ /* i2c3_sdam2 */
+ .bank_num = 2,
+ .pin = 0,
+ .func = 3,
+ .route_offset = 0x608,
+ .route_val = BIT(16 + 8) | BIT(16 + 9) | BIT(9),
+ }, {
+ /* i2s-8ch-1-sclktxm0 */
+ .bank_num = 1,
+ .pin = 3,
+ .func = 2,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 3),
+ }, {
+ /* i2s-8ch-1-sclkrxm0 */
+ .bank_num = 1,
+ .pin = 4,
+ .func = 2,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 3),
+ }, {
+ /* i2s-8ch-1-sclktxm1 */
+ .bank_num = 1,
+ .pin = 13,
+ .func = 2,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 3) | BIT(3),
+ }, {
+ /* i2s-8ch-1-sclkrxm1 */
+ .bank_num = 1,
+ .pin = 14,
+ .func = 2,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 3) | BIT(3),
+ }, {
+ /* pdm-clkm0 */
+ .bank_num = 1,
+ .pin = 4,
+ .func = 3,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 12) | BIT(16 + 13),
+ }, {
+ /* pdm-clkm1 */
+ .bank_num = 1,
+ .pin = 14,
+ .func = 4,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12),
+ }, {
+ /* pdm-clkm2 */
+ .bank_num = 2,
+ .pin = 6,
+ .func = 2,
+ .route_offset = 0x308,
+ .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13),
+ }, {
+ /* pdm-clkm-m2 */
+ .bank_num = 2,
+ .pin = 4,
+ .func = 3,
+ .route_offset = 0x600,
+ .route_val = BIT(16 + 2) | BIT(2),
+ }, {
+ /* spi1_miso */
+ .bank_num = 3,
+ .pin = 10,
+ .func = 3,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 9),
+ }, {
+ /* spi1_miso_m1 */
+ .bank_num = 2,
+ .pin = 4,
+ .func = 2,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 9) | BIT(9),
+ }, {
+ /* owire_m0 */
+ .bank_num = 0,
+ .pin = 11,
+ .func = 3,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 10) | BIT(16 + 11),
+ }, {
+ /* owire_m1 */
+ .bank_num = 1,
+ .pin = 22,
+ .func = 7,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(10),
+ }, {
+ /* owire_m2 */
+ .bank_num = 2,
+ .pin = 2,
+ .func = 5,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 10) | BIT(16 + 11) | BIT(11),
+ }, {
+ /* can_rxd_m0 */
+ .bank_num = 0,
+ .pin = 11,
+ .func = 2,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 12) | BIT(16 + 13),
+ }, {
+ /* can_rxd_m1 */
+ .bank_num = 1,
+ .pin = 22,
+ .func = 5,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(12),
+ }, {
+ /* can_rxd_m2 */
+ .bank_num = 2,
+ .pin = 2,
+ .func = 4,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 12) | BIT(16 + 13) | BIT(13),
+ }, {
+ /* mac_rxd0_m0 */
+ .bank_num = 1,
+ .pin = 20,
+ .func = 3,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 14),
+ }, {
+ /* mac_rxd0_m1 */
+ .bank_num = 4,
+ .pin = 2,
+ .func = 2,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 14) | BIT(14),
+ }, {
+ /* uart3_rx */
+ .bank_num = 3,
+ .pin = 12,
+ .func = 4,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 15),
+ }, {
+ /* uart3_rx_m1 */
+ .bank_num = 0,
+ .pin = 17,
+ .func = 3,
+ .route_offset = 0x314,
+ .route_val = BIT(16 + 15) | BIT(15),
+ },
+};
+
static struct rockchip_mux_route_data rk3328_mux_route_data[] = {
{
/* uart2dbg_rxm0 */
@@ -1475,6 +1757,26 @@ static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
return 0;
}
+#define RK3308_SCHMITT_PINS_PER_REG 8
+#define RK3308_SCHMITT_BANK_STRIDE 16
+#define RK3308_SCHMITT_GRF_OFFSET 0x1a0
+
+static int rk3308_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ *reg = RK3308_SCHMITT_GRF_OFFSET;
+
+ *reg += bank->bank_num * RK3308_SCHMITT_BANK_STRIDE;
+ *reg += ((pin_num / RK3308_SCHMITT_PINS_PER_REG) * 4);
+ *bit = pin_num % RK3308_SCHMITT_PINS_PER_REG;
+
+ return 0;
+}
+
#define RK2928_PULL_OFFSET 0x118
#define RK2928_PULL_PINS_PER_REG 16
#define RK2928_PULL_BANK_STRIDE 8
@@ -1646,6 +1948,40 @@ static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
*bit *= RK3288_DRV_BITS_PER_PIN;
}
+#define RK3308_PULL_OFFSET 0xa0
+
+static void rk3308_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ *reg = RK3308_PULL_OFFSET;
+ *reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
+ *reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
+
+ *bit = (pin_num % RK3188_PULL_PINS_PER_REG);
+ *bit *= RK3188_PULL_BITS_PER_PIN;
+}
+
+#define RK3308_DRV_GRF_OFFSET 0x100
+
+static void rk3308_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ *regmap = info->regmap_base;
+ *reg = RK3308_DRV_GRF_OFFSET;
+ *reg += bank->bank_num * RK3288_DRV_BANK_STRIDE;
+ *reg += ((pin_num / RK3288_DRV_PINS_PER_REG) * 4);
+
+ *bit = (pin_num % RK3288_DRV_PINS_PER_REG);
+ *bit *= RK3288_DRV_BITS_PER_PIN;
+}
+
#define RK3368_PULL_GRF_OFFSET 0x100
#define RK3368_PULL_PMU_OFFSET 0x10
@@ -1986,6 +2322,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank *bank, int pin_num)
case RV1108:
case RK3188:
case RK3288:
+ case RK3308:
case RK3368:
case RK3399:
pull_type = bank->pull_type[pin_num / 8];
@@ -2030,6 +2367,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
case RV1108:
case RK3188:
case RK3288:
+ case RK3308:
case RK3368:
case RK3399:
pull_type = bank->pull_type[pin_num / 8];
@@ -2293,6 +2631,7 @@ static bool rockchip_pinconf_pull_valid(struct rockchip_pin_ctrl *ctrl,
case RV1108:
case RK3188:
case RK3288:
+ case RK3308:
case RK3368:
case RK3399:
return (pull != PIN_CONFIG_BIAS_PULL_PIN_DEFAULT);
@@ -3709,6 +4048,44 @@ static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
.drv_calc_reg = rk3288_calc_drv_reg_and_bit,
};
+static struct rockchip_pin_bank rk3308_pin_banks[] = {
+ PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT),
+ PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT),
+ PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT),
+ PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT),
+ PIN_BANK_IOMUX_FLAGS(4, 32, "gpio4", IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT,
+ IOMUX_WIDTH_2BIT),
+};
+
+static struct rockchip_pin_ctrl rk3308_pin_ctrl = {
+ .pin_banks = rk3308_pin_banks,
+ .nr_banks = ARRAY_SIZE(rk3308_pin_banks),
+ .label = "RK3308-GPIO",
+ .type = RK3308,
+ .grf_mux_offset = 0x0,
+ .iomux_recalced = rk3308_mux_recalced_data,
+ .niomux_recalced = ARRAY_SIZE(rk3308_mux_recalced_data),
+ .iomux_routes = rk3308_mux_route_data,
+ .niomux_routes = ARRAY_SIZE(rk3308_mux_route_data),
+ .pull_calc_reg = rk3308_calc_pull_reg_and_bit,
+ .drv_calc_reg = rk3308_calc_drv_reg_and_bit,
+ .schmitt_calc_reg = rk3308_calc_schmitt_reg_and_bit,
+};
+
static struct rockchip_pin_bank rk3328_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
@@ -3849,6 +4226,8 @@ static const struct of_device_id rockchip_pinctrl_dt_match[] = {
.data = &rk3228_pin_ctrl },
{ .compatible = "rockchip,rk3288-pinctrl",
.data = &rk3288_pin_ctrl },
+ { .compatible = "rockchip,rk3308-pinctrl",
+ .data = &rk3308_pin_ctrl },
{ .compatible = "rockchip,rk3328-pinctrl",
.data = &rk3328_pin_ctrl },
{ .compatible = "rockchip,rk3368-pinctrl",
--
2.17.1
prev parent reply other threads:[~2019-10-14 3:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-12 6:15 [PATCH 0/2] pinctrl: rockchip: support rk3308 SoC Jianqun Xu
2019-10-12 6:15 ` [PATCH 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support Jianqun Xu
2019-10-12 6:15 ` [PATCH 2/2] " Jianqun Xu
2019-10-12 8:58 ` [PATCH 0/2] pinctrl: rockchip: support rk3308 SoC Heiko Stübner
2019-10-14 0:25 ` [PATCH v2 " Jianqun Xu
2019-10-14 0:25 ` [PATCH v2 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support Jianqun Xu
2019-10-14 0:25 ` [PATCH v2 2/2] " Jianqun Xu
2019-10-14 3:03 ` [PATCH v2 0/2] pinctrl: rockchip: support rk3308 SoC Jianqun Xu
2019-10-14 3:03 ` [PATCH v2 1/2] dt-bindings: pinctrl: rockchip: add rk3308 SoC support Jianqun Xu
2019-10-14 18:15 ` Rob Herring
2019-10-14 3:04 ` Jianqun Xu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191014030408.18914-1-jay.xu@rock-chips.com \
--to=jay.xu@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).