From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH] pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias control
Date: Wed, 13 Nov 2019 11:16:53 +0100 [thread overview]
Message-ID: <20191113101653.28428-1-geert+renesas@glider.be> (raw)
R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019
changed the configuration bits for drive and bias control for the
DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3.
Update the driver to reflect this.
After this, the handling of drive and bias control for the various
DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W,
M3-W+, and M3-N SoCs.
Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in sh-pfc-for-v5.6.
drivers/pinctrl/sh-pfc/pfc-r8a77965.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
index 8bdf33c807f6c7f4..6616f5210b9d96d4 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77965.c
@@ -5998,7 +5998,7 @@ static const struct pinmux_drive_reg pinmux_drive_regs[] = {
{ PIN_DU_DOTCLKIN1, 0, 2 }, /* DU_DOTCLKIN1 */
} },
{ PINMUX_DRIVE_REG("DRVCTRL12", 0xe6060330) {
- { PIN_DU_DOTCLKIN3, 28, 2 }, /* DU_DOTCLKIN3 */
+ { PIN_DU_DOTCLKIN3, 24, 2 }, /* DU_DOTCLKIN3 */
{ PIN_FSCLKST, 20, 2 }, /* FSCLKST */
{ PIN_TMS, 4, 2 }, /* TMS */
} },
@@ -6254,8 +6254,8 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
[31] = PIN_DU_DOTCLKIN1, /* DU_DOTCLKIN1 */
} },
{ PINMUX_BIAS_REG("PUEN3", 0xe606040c, "PUD3", 0xe606044c) {
- [ 0] = PIN_DU_DOTCLKIN3, /* DU_DOTCLKIN3 */
- [ 1] = SH_PFC_PIN_NONE,
+ [ 0] = SH_PFC_PIN_NONE,
+ [ 1] = PIN_DU_DOTCLKIN3, /* DU_DOTCLKIN3 */
[ 2] = PIN_FSCLKST, /* FSCLKST */
[ 3] = PIN_EXTALR, /* EXTALR*/
[ 4] = PIN_TRST_N, /* TRST# */
--
2.17.1
reply other threads:[~2019-11-13 10:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191113101653.28428-1-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).