Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Kent Gibson <warthog618@gmail.com>
To: linux-gpio@vger.kernel.org, bgolaszewski@baylibre.com
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [libgpiod][PATCH v3 11/14] bindings: python: add support for SET_CONFIG
Date: Mon, 25 Nov 2019 22:31:54 +0800
Message-ID: <20191125143157.26154-12-warthog618@gmail.com> (raw)
In-Reply-To: <20191125143157.26154-1-warthog618@gmail.com>

Add methods to support setting line configuration.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 bindings/python/gpiodmodule.c | 381 +++++++++++++++++++++++++++++++++-
 1 file changed, 379 insertions(+), 2 deletions(-)

diff --git a/bindings/python/gpiodmodule.c b/bindings/python/gpiodmodule.c
index 4723771..4f5e117 100644
--- a/bindings/python/gpiodmodule.c
+++ b/bindings/python/gpiodmodule.c
@@ -585,14 +585,149 @@ static PyObject *gpiod_Line_set_value(gpiod_LineObject *self, PyObject *args)
 	if (!bulk_obj)
 		return NULL;
 
-	vals = Py_BuildValue("((O))", val);
+	vals = Py_BuildValue("(O)", val);
 	if (!vals) {
 		Py_DECREF(bulk_obj);
 		return NULL;
 	}
 
 	ret = PyObject_CallMethod((PyObject *)bulk_obj,
-				  "set_values", "O", vals);
+				  "set_values", "(O)", vals);
+	Py_DECREF(bulk_obj);
+	Py_DECREF(vals);
+
+	return ret;
+}
+
+PyDoc_STRVAR(gpiod_Line_set_config_doc,
+"set_config(direction,flags,value) -> None\n"
+"\n"
+"Set the configuration of this GPIO line.\n"
+"\n"
+"  direction\n"
+"    New direction (integer)\n"
+"  flags\n"
+"    New flags (integer)\n"
+"  value\n"
+"    New value (integer)");
+
+static PyObject *gpiod_Line_set_config(gpiod_LineObject *self, PyObject *args)
+{
+	gpiod_LineBulkObject *bulk_obj;
+	PyObject *dirn, *flags, *val, *vals, *ret;
+	int rv;
+
+	val = NULL;
+	rv = PyArg_ParseTuple(args, "OO|O", &dirn, &flags, &val);
+	if (!rv)
+		return NULL;
+
+	bulk_obj = gpiod_LineToLineBulk(self);
+	if (!bulk_obj)
+		return NULL;
+
+	if (val) {
+		vals = Py_BuildValue("(O)", val);
+		if (!vals) {
+			Py_DECREF(bulk_obj);
+			return NULL;
+		}
+		ret = PyObject_CallMethod((PyObject *)bulk_obj,
+				"set_config", "OO(O)", dirn, flags, vals);
+		Py_DECREF(vals);
+	} else
+		ret = PyObject_CallMethod((PyObject *)bulk_obj,
+				"set_config", "OO", dirn, flags);
+
+	Py_DECREF(bulk_obj);
+
+	return ret;
+}
+
+PyDoc_STRVAR(gpiod_Line_set_flags_doc,
+"set_flags(flags) -> None\n"
+"\n"
+"Set the flags of this GPIO line.\n"
+"\n"
+"  flags\n"
+"    New flags (integer)");
+
+static PyObject *gpiod_Line_set_flags(gpiod_LineObject *self, PyObject *args)
+{
+	gpiod_LineBulkObject *bulk_obj;
+	PyObject *ret;
+
+	bulk_obj = gpiod_LineToLineBulk(self);
+	if (!bulk_obj)
+		return NULL;
+
+	ret = PyObject_CallMethod((PyObject *)bulk_obj,
+				  "set_flags", "O", args);
+	Py_DECREF(bulk_obj);
+
+	return ret;
+}
+
+PyDoc_STRVAR(gpiod_Line_set_direction_input_doc,
+"set_direction_input() -> None\n"
+"\n"
+"Set the direction of this GPIO line to input.\n");
+
+static PyObject *gpiod_Line_set_direction_input(gpiod_LineObject *self,
+						PyObject *Py_UNUSED(ignored))
+{
+	gpiod_LineBulkObject *bulk_obj;
+	PyObject *ret;
+
+	bulk_obj = gpiod_LineToLineBulk(self);
+	if (!bulk_obj)
+		return NULL;
+
+	ret = PyObject_CallMethod((PyObject *)bulk_obj,
+				  "set_direction_input", "");
+	Py_DECREF(bulk_obj);
+
+	return ret;
+}
+
+PyDoc_STRVAR(gpiod_Line_set_direction_output_doc,
+"set_direction_output(value) -> None\n"
+"\n"
+"Set the direction of this GPIO line to output.\n"
+"\n"
+"  value\n"
+"    New value (integer)");
+
+static PyObject *gpiod_Line_set_direction_output(gpiod_LineObject *self,
+						 PyObject *args)
+{
+	gpiod_LineBulkObject *bulk_obj;
+	PyObject *val, *vals, *ret;
+	int rv;
+	const char *fmt;
+
+	val = NULL;
+	rv = PyArg_ParseTuple(args, "|O", &val);
+	if (!rv)
+		return NULL;
+
+	if (val) {
+		fmt = "(O)";
+		vals = Py_BuildValue(fmt, val);
+	} else {
+		vals = Py_BuildValue("()");
+		fmt = "O"; /* pass empty args to bulk */
+	}
+	if (!vals)
+		return NULL;
+
+	bulk_obj = gpiod_LineToLineBulk(self);
+	if (!bulk_obj)
+		return NULL;
+
+	ret = PyObject_CallMethod((PyObject *)bulk_obj,
+				  "set_direction_output", fmt, vals);
+
 	Py_DECREF(bulk_obj);
 	Py_DECREF(vals);
 
@@ -838,6 +973,30 @@ static PyMethodDef gpiod_Line_methods[] = {
 		.ml_flags = METH_VARARGS,
 		.ml_doc = gpiod_Line_set_value_doc,
 	},
+	{
+		.ml_name = "set_config",
+		.ml_meth = (PyCFunction)gpiod_Line_set_config,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_Line_set_config_doc,
+	},
+	{
+		.ml_name = "set_flags",
+		.ml_meth = (PyCFunction)gpiod_Line_set_flags,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_Line_set_flags_doc,
+	},
+	{
+		.ml_name = "set_direction_input",
+		.ml_meth = (PyCFunction)gpiod_Line_set_direction_input,
+		.ml_flags = METH_NOARGS,
+		.ml_doc = gpiod_Line_set_direction_input_doc,
+	},
+	{
+		.ml_name = "set_direction_output",
+		.ml_meth = (PyCFunction)gpiod_Line_set_direction_output,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_Line_set_direction_output_doc,
+	},
 	{
 		.ml_name = "release",
 		.ml_meth = (PyCFunction)gpiod_Line_release,
@@ -1283,6 +1442,200 @@ static PyObject *gpiod_LineBulk_set_values(gpiod_LineBulkObject *self,
 	Py_RETURN_NONE;
 }
 
+static int convert_values(PyObject *src, int *dst, Py_ssize_t n)
+{
+	int val;
+	Py_ssize_t num_vals, i;
+	PyObject *iter, *next;
+
+	num_vals = PyObject_Size(src);
+	if (num_vals != n) {
+		PyErr_SetString(PyExc_TypeError,
+			"Number of values must correspond to the number of lines");
+		return -1;
+	}
+	iter = PyObject_GetIter(src);
+	if (!iter)
+		return -1;
+	for (i = 0;; i++) {
+		next = PyIter_Next(iter);
+		if (!next) {
+			Py_DECREF(iter);
+			break;
+		}
+		val = PyLong_AsLong(next);
+		Py_DECREF(next);
+		if (PyErr_Occurred()) {
+			Py_DECREF(iter);
+			return -1;
+		}
+		dst[i] = (int)val;
+	}
+	return 0;
+}
+
+PyDoc_STRVAR(gpiod_LineBulk_set_config_doc,
+"set_config(direction,flags,values) -> None\n"
+"\n"
+"Set the configuration of all the lines held by this LineBulk object.\n"
+"\n"
+"  direction\n"
+"    New direction (integer)\n"
+"  flags\n"
+"    New flags (integer)\n"
+"  values\n"
+"    List of values (integers) to set when direction is output.\n"
+"\n"
+"The number of values in the list passed as argument must be the same as\n"
+"the number of lines held by this gpiod.LineBulk object. The index of each\n"
+"value corresponds to the index of each line in the object.\n");
+
+static PyObject *gpiod_LineBulk_set_config(gpiod_LineBulkObject *self,
+					   PyObject *args)
+{
+	int rv, vals[GPIOD_LINE_BULK_MAX_LINES];
+	PyObject *val_list;
+	struct gpiod_line_bulk bulk;
+	const int *valp;
+	int dirn, flags;
+
+	if (gpiod_LineBulkOwnerIsClosed(self))
+		return NULL;
+
+	gpiod_LineBulkObjToCLineBulk(self, &bulk);
+
+	val_list = NULL;
+	rv = PyArg_ParseTuple(args, "ii|(O)", &dirn, &flags, &val_list);
+	if (!rv)
+		return NULL;
+
+	if (val_list == NULL)
+		valp = NULL;
+	else {
+		memset(vals, 0, sizeof(vals));
+		rv = convert_values(val_list, vals, self->num_lines);
+		if (rv)
+			return NULL;
+		valp = vals;
+	}
+
+	Py_BEGIN_ALLOW_THREADS;
+	rv = gpiod_line_set_config_bulk(&bulk, dirn, flags, valp);
+	Py_END_ALLOW_THREADS;
+	if (rv)
+		return PyErr_SetFromErrno(PyExc_OSError);
+
+	Py_RETURN_NONE;
+}
+
+PyDoc_STRVAR(gpiod_LineBulk_set_flags_doc,
+"set_flags(flags) -> None\n"
+"\n"
+"Set the flags of all the lines held by this LineBulk object.\n"
+"\n"
+"  flags\n"
+"    New flags (integer)");
+
+static PyObject *gpiod_LineBulk_set_flags(gpiod_LineBulkObject *self,
+					  PyObject *args)
+{
+	int rv;
+	struct gpiod_line_bulk bulk;
+	int flags;
+
+	if (gpiod_LineBulkOwnerIsClosed(self))
+		return NULL;
+
+	gpiod_LineBulkObjToCLineBulk(self, &bulk);
+
+	rv = PyArg_ParseTuple(args, "i", &flags);
+	if (!rv)
+		return NULL;
+
+	Py_BEGIN_ALLOW_THREADS;
+	rv = gpiod_line_set_flags_bulk(&bulk, flags);
+	Py_END_ALLOW_THREADS;
+	if (rv)
+		return PyErr_SetFromErrno(PyExc_OSError);
+
+	Py_RETURN_NONE;
+}
+
+PyDoc_STRVAR(gpiod_LineBulk_set_direction_input_doc,
+"set_direction_input() -> None\n"
+"\n"
+"Set the direction of all the lines held by this LineBulk object to input.\n");
+
+static PyObject *gpiod_LineBulk_set_direction_input(gpiod_LineBulkObject *self,
+						PyObject *Py_UNUSED(ignored))
+{
+	struct gpiod_line_bulk bulk;
+	int rv;
+
+	if (gpiod_LineBulkOwnerIsClosed(self))
+		return NULL;
+
+	gpiod_LineBulkObjToCLineBulk(self, &bulk);
+
+	Py_BEGIN_ALLOW_THREADS;
+	rv = gpiod_line_set_direction_input_bulk(&bulk);
+	Py_END_ALLOW_THREADS;
+	if (rv)
+		return PyErr_SetFromErrno(PyExc_OSError);
+
+	Py_RETURN_NONE;
+}
+
+PyDoc_STRVAR(gpiod_LineBulk_set_direction_output_doc,
+"set_direction_output(value) -> None\n"
+"\n"
+"Set the direction of all the lines held by this LineBulk object to output.\n"
+"\n"
+"  values\n"
+"    List of values (integers) to set when direction is output.\n"
+"\n"
+"The number of values in the list passed as argument must be the same as\n"
+"the number of lines held by this gpiod.LineBulk object. The index of each\n"
+"value corresponds to the index of each line in the object.\n");
+
+static PyObject *gpiod_LineBulk_set_direction_output(
+				gpiod_LineBulkObject *self,
+				PyObject *args)
+{
+	int rv, vals[GPIOD_LINE_BULK_MAX_LINES];
+	PyObject *val_list;
+	struct gpiod_line_bulk bulk;
+	const int *valp;
+
+	if (gpiod_LineBulkOwnerIsClosed(self))
+		return NULL;
+
+	gpiod_LineBulkObjToCLineBulk(self, &bulk);
+
+	val_list = NULL;
+	rv = PyArg_ParseTuple(args, "|O", &val_list);
+	if (!rv)
+		return NULL;
+
+	if (val_list == NULL)
+		valp = NULL;
+	else {
+		memset(vals, 0, sizeof(vals));
+		rv = convert_values(val_list, vals, self->num_lines);
+		if (rv)
+			return NULL;
+		valp = vals;
+	}
+
+	Py_BEGIN_ALLOW_THREADS;
+	rv = gpiod_line_set_direction_output_bulk(&bulk, valp);
+	Py_END_ALLOW_THREADS;
+	if (rv)
+		return PyErr_SetFromErrno(PyExc_OSError);
+
+	Py_RETURN_NONE;
+}
+
 PyDoc_STRVAR(gpiod_LineBulk_release_doc,
 "release() -> None\n"
 "\n"
@@ -1431,6 +1784,30 @@ static PyMethodDef gpiod_LineBulk_methods[] = {
 		.ml_doc = gpiod_LineBulk_set_values_doc,
 		.ml_flags = METH_VARARGS,
 	},
+	{
+		.ml_name = "set_config",
+		.ml_meth = (PyCFunction)gpiod_LineBulk_set_config,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_LineBulk_set_config_doc,
+	},
+	{
+		.ml_name = "set_flags",
+		.ml_meth = (PyCFunction)gpiod_LineBulk_set_flags,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_LineBulk_set_flags_doc,
+	},
+	{
+		.ml_name = "set_direction_input",
+		.ml_meth = (PyCFunction)gpiod_LineBulk_set_direction_input,
+		.ml_flags = METH_NOARGS,
+		.ml_doc = gpiod_LineBulk_set_direction_input_doc,
+	},
+	{
+		.ml_name = "set_direction_output",
+		.ml_meth = (PyCFunction)gpiod_LineBulk_set_direction_output,
+		.ml_flags = METH_VARARGS,
+		.ml_doc = gpiod_LineBulk_set_direction_output_doc,
+	},
 	{
 		.ml_name = "release",
 		.ml_meth = (PyCFunction)gpiod_LineBulk_release,
-- 
2.24.0


  parent reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-25 14:31 [libgpiod][PATCH v3 00/14] Add support for bias flags and SET_CONFIG Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 01/14] core: add support for bias flags Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 02/14] tests: add tests " Kent Gibson
2019-11-28 10:28   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 03/14] bindings: cxx: add support " Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 04/14] bindings: cxx: tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 05/14] bindings: python: add support " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 06/14] bindings: python: tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 07/14] core: add support for SET_CONFIG Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 08/14] tests: add tests " Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 09/14] bindings: cxx: add support " Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 10/14] bindings: cxx: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-25 14:31 ` Kent Gibson [this message]
2019-11-28 10:29   ` [libgpiod][PATCH v3 11/14] bindings: python: add support for SET_CONFIG Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 12/14] bindings: python: tests: add tests for SET_CONFIG methods Kent Gibson
2019-11-25 14:31 ` [libgpiod][PATCH v3 13/14] tools: add support for bias flags Kent Gibson
2019-11-28 10:29   ` Bartosz Golaszewski
2019-11-25 14:31 ` [libgpiod][PATCH v3 14/14] tools: add tests for bias and drive flags Kent Gibson

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191125143157.26154-12-warthog618@gmail.com \
    --to=warthog618@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linux-gpio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git