Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
@ 2019-12-02  5:01 Andrew Jeffery
  0 siblings, 0 replies; only message in thread
From: Andrew Jeffery @ 2019-12-02  5:01 UTC (permalink / raw)
  To: linux-gpio
  Cc: linus.walleij, joel, linux-aspeed, linux-arm-kernel, linux-kernel

Early revisions of the AST2600 datasheet are conflicted about the state
of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED
determined that the reference pinmux configuration tables were in error
and the SCU documentation contained the correct configuration. Update
the driver to reflect the state described in the SCU documentation.

Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 24 ++++++++--------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index c6800d220920..bb07024d22ed 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -1088,60 +1088,52 @@ SSSF_PIN_DECL(AF15, GPIOV7, LPCSMI, SIG_DESC_SET(SCU434, 15));
 
 #define AB7 176
 SIG_EXPR_LIST_DECL_SESG(AB7, LAD0, LPC, SIG_DESC_SET(SCU434, 16),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB7, ESPID0, ESPI, SIG_DESC_SET(SCU434, 16));
 PIN_DECL_2(AB7, GPIOW0, LAD0, ESPID0);
 
 #define AB8 177
 SIG_EXPR_LIST_DECL_SESG(AB8, LAD1, LPC, SIG_DESC_SET(SCU434, 17),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AB8, ESPID1, ESPI, SIG_DESC_SET(SCU434, 17));
 PIN_DECL_2(AB8, GPIOW1, LAD1, ESPID1);
 
 #define AC8 178
 SIG_EXPR_LIST_DECL_SESG(AC8, LAD2, LPC, SIG_DESC_SET(SCU434, 18),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC8, ESPID2, ESPI, SIG_DESC_SET(SCU434, 18));
 PIN_DECL_2(AC8, GPIOW2, LAD2, ESPID2);
 
 #define AC7 179
 SIG_EXPR_LIST_DECL_SESG(AC7, LAD3, LPC, SIG_DESC_SET(SCU434, 19),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AC7, ESPID3, ESPI, SIG_DESC_SET(SCU434, 19));
 PIN_DECL_2(AC7, GPIOW3, LAD3, ESPID3);
 
 #define AE7 180
 SIG_EXPR_LIST_DECL_SESG(AE7, LCLK, LPC, SIG_DESC_SET(SCU434, 20),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AE7, ESPICK, ESPI, SIG_DESC_SET(SCU434, 20));
 PIN_DECL_2(AE7, GPIOW4, LCLK, ESPICK);
 
 #define AF7 181
 SIG_EXPR_LIST_DECL_SESG(AF7, LFRAME, LPC, SIG_DESC_SET(SCU434, 21),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AF7, ESPICS, ESPI, SIG_DESC_SET(SCU434, 21));
 PIN_DECL_2(AF7, GPIOW5, LFRAME, ESPICS);
 
 #define AD7 182
 SIG_EXPR_LIST_DECL_SESG(AD7, LSIRQ, LSIRQ, SIG_DESC_SET(SCU434, 22),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD7, ESPIALT, ESPIALT, SIG_DESC_SET(SCU434, 22));
 PIN_DECL_2(AD7, GPIOW6, LSIRQ, ESPIALT);
 FUNC_GROUP_DECL(LSIRQ, AD7);
 FUNC_GROUP_DECL(ESPIALT, AD7);
 
 #define AD8 183
 SIG_EXPR_LIST_DECL_SESG(AD8, LPCRST, LPC, SIG_DESC_SET(SCU434, 23),
-			  SIG_DESC_CLEAR(SCU510, 6));
-SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23),
 			  SIG_DESC_SET(SCU510, 6));
+SIG_EXPR_LIST_DECL_SESG(AD8, ESPIRST, ESPI, SIG_DESC_SET(SCU434, 23));
 PIN_DECL_2(AD8, GPIOW7, LPCRST, ESPIRST);
 
 FUNC_GROUP_DECL(LPC, AB7, AB8, AC8, AC7, AE7, AF7, AD8);
-- 
2.20.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-02  5:01 [PATCH] pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration Andrew Jeffery

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git