From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
linux-gpio@vger.kernel.org,
Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 11/24] pinctrl: lynxpoint: Convert unsigned to unsigned int
Date: Mon, 9 Dec 2019 15:09:13 +0200 [thread overview]
Message-ID: <20191209130926.86483-12-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20191209130926.86483-1-andriy.shevchenko@linux.intel.com>
Simple type conversion with no functional change implied.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/pinctrl/intel/pinctrl-lynxpoint.c | 24 +++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-lynxpoint.c b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
index 4ed2d4daea19..3c8241ed8bc2 100644
--- a/drivers/pinctrl/intel/pinctrl-lynxpoint.c
+++ b/drivers/pinctrl/intel/pinctrl-lynxpoint.c
@@ -82,7 +82,7 @@ struct lp_gpio {
* LP94_CONFIG2 (gpio 94) ...
*/
-static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned offset,
+static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned int offset,
int reg)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
@@ -98,7 +98,7 @@ static void __iomem *lp_gpio_reg(struct gpio_chip *chip, unsigned offset,
return lg->regs + reg + reg_offset;
}
-static int lp_gpio_request(struct gpio_chip *chip, unsigned offset)
+static int lp_gpio_request(struct gpio_chip *chip, unsigned int offset)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
@@ -131,7 +131,7 @@ static int lp_gpio_request(struct gpio_chip *chip, unsigned offset)
return 0;
}
-static void lp_gpio_free(struct gpio_chip *chip, unsigned offset)
+static void lp_gpio_free(struct gpio_chip *chip, unsigned int offset)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *conf2 = lp_gpio_reg(chip, offset, LP_CONFIG2);
@@ -142,7 +142,7 @@ static void lp_gpio_free(struct gpio_chip *chip, unsigned offset)
pm_runtime_put(lg->dev);
}
-static int lp_irq_type(struct irq_data *d, unsigned type)
+static int lp_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct lp_gpio *lg = gpiochip_get_data(gc);
@@ -185,13 +185,13 @@ static int lp_irq_type(struct irq_data *d, unsigned type)
return 0;
}
-static int lp_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int lp_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
return !!(ioread32(reg) & IN_LVL_BIT);
}
-static void lp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static void lp_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
@@ -207,7 +207,7 @@ static void lp_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
raw_spin_unlock_irqrestore(&lg->lock, flags);
}
-static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
@@ -220,8 +220,8 @@ static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
return 0;
}
-static int lp_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
+static int lp_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
+ int value)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *reg = lp_gpio_reg(chip, offset, LP_CONFIG1);
@@ -255,7 +255,7 @@ static void lp_gpio_irq_handler(struct irq_desc *desc)
pending = ioread32(reg) & ioread32(ena);
for_each_set_bit(pin, &pending, 32) {
- unsigned irq;
+ unsigned int irq;
/* Clear before handling so we don't lose an edge */
iowrite32(BIT(pin), reg);
@@ -315,7 +315,7 @@ static int lp_gpio_irq_init_hw(struct gpio_chip *chip)
{
struct lp_gpio *lg = gpiochip_get_data(chip);
void __iomem *reg;
- unsigned base;
+ unsigned int base;
for (base = 0; base < lg->chip.ngpio; base += 32) {
/* disable gpio pin interrupts */
@@ -390,7 +390,7 @@ static int lp_gpio_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!girq->parents)
return -ENOMEM;
- girq->parents[0] = (unsigned)irq_rc->start;
+ girq->parents[0] = (unsigned int)irq_rc->start;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
}
--
2.24.0
next prev parent reply other threads:[~2019-12-09 13:09 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-09 13:09 [PATCH v2 00/24] pinctrl: intel: Move Lynxpoint to pin control umbrella Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 01/24] pinctrl: lynxpoint: Move GPIO driver to pin controller folder Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 02/24] pinctrl: lynxpoint: Use raw_spinlock for locking Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 03/24] pinctrl: lynxpoint: Correct amount of pins Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 04/24] pinctrl: lynxpoint: Drop useless assignment Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 05/24] pinctrl: lynxpoint: Use %pR to print IO resource Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 06/24] pinctrl: lynxpoint: Use standard pattern for memory allocation Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 07/24] pinctrl: lynxpoint: Assume 2 bits for mode selector Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 08/24] pinctrl: lynxpoint: Relax GPIO request rules Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 09/24] pinctrl: lynxpoint: Keep pointer to struct device instead of its container Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 10/24] pinctrl: lynxpoint: Switch to memory mapped IO accessors Andy Shevchenko
2019-12-09 13:09 ` Andy Shevchenko [this message]
2019-12-09 13:09 ` [PATCH v2 12/24] pinctrl: lynxpoint: Extract lp_gpio_acpi_use() for future use Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 13/24] pinctrl: lynxpoint: Move ->remove closer to ->probe() Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 14/24] pinctrl: lynxpoint: Move lp_irq_type() closer to IRQ related routines Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 15/24] pinctrl: lynxpoint: Move ownership check to IRQ chip Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 16/24] pinctrl: lynxpoint: Implement ->irq_ack() callback Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 17/24] pinctrl: lynxpoint: Implement intel_gpio_get_direction callback Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 18/24] pinctrl: lynxpoint: Add pin control data structures Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 19/24] pinctrl: lynxpoint: Reuse struct intel_pinctrl in the driver Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 20/24] pinctrl: lynxpoint: Add pin control operations Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 21/24] pinctrl: lynxpoint: Implement ->pin_dbg_show() Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 22/24] pinctrl: lynxpoint: Add GPIO <-> pin mapping ranges via callback Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 23/24] pinctrl: lynxpoint: Switch to pin control API Andy Shevchenko
2019-12-09 13:09 ` [PATCH v2 24/24] pinctrl: lynxpoint: Update summary in the driver Andy Shevchenko
2019-12-11 13:19 ` [PATCH v2 00/24] pinctrl: intel: Move Lynxpoint to pin control umbrella Mika Westerberg
2019-12-13 13:36 ` Linus Walleij
2019-12-13 14:44 ` Andy Shevchenko
2019-12-16 10:19 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191209130926.86483-12-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).