Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Yoshinori Sato <ysato@users.sourceforge.jp>,
	Rich Felker <dalias@libc.org>
Cc: linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org,
	linux-gpio@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 4/6] pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
Date: Wed, 18 Dec 2019 20:48:10 +0100
Message-ID: <20191218194812.12741-5-geert+renesas@glider.be> (raw)
In-Reply-To: <20191218194812.12741-1-geert+renesas@glider.be>

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
  - Some functionality is available on alternative pins, but the
    PINMUX_DATA() entries is using the wrong marks,
  - Several configurations are missing.

Fix this by:
  - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
    CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
    resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
    corresponding enum IDs,
  - Adding all missing enum IDs and marks,
  - Use the right (*_PJ2x) variants for alternative pins,
  - Adding all missing configurations to pinmux_data[],
  - Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
  [1] Table 1.4 List of Pins
  [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
      Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
      (32 Mailboxes × 1 Channel),
  [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
      One Channel (96 Mailboxes × 1 Channel),
  [4] Table 48.3 Multiplexed Pins (Port B),
  [5] Table 48.4 Multiplexed Pins (Port C),
  [6] Table 48.10 Multiplexed Pins (Port J),
  [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
The runtime-check under development reports:

    sh7269_pfc: empty function gpio 46
---
 arch/sh/include/cpu-sh2a/cpu/sh7269.h | 11 ++++++--
 drivers/pinctrl/sh-pfc/pfc-sh7269.c   | 39 ++++++++++++++++++---------
 2 files changed, 36 insertions(+), 14 deletions(-)

diff --git a/arch/sh/include/cpu-sh2a/cpu/sh7269.h b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
index d516e5d488180db7..b887cc402b712557 100644
--- a/arch/sh/include/cpu-sh2a/cpu/sh7269.h
+++ b/arch/sh/include/cpu-sh2a/cpu/sh7269.h
@@ -78,8 +78,15 @@ enum {
 	GPIO_FN_WDTOVF,
 
 	/* CAN */
-	GPIO_FN_CTX1, GPIO_FN_CRX1, GPIO_FN_CTX0, GPIO_FN_CTX0_CTX1,
-	GPIO_FN_CRX0, GPIO_FN_CRX0_CRX1, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2, GPIO_FN_CRX2,
+	GPIO_FN_CTX1, GPIO_FN_CRX1,
+	GPIO_FN_CTX0, GPIO_FN_CRX0,
+	GPIO_FN_CTX0_CTX1, GPIO_FN_CRX0_CRX1,
+	GPIO_FN_CTX0_CTX1_CTX2, GPIO_FN_CRX0_CRX1_CRX2,
+	GPIO_FN_CTX2_PJ21, GPIO_FN_CRX2_PJ20,
+	GPIO_FN_CTX1_PJ23, GPIO_FN_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_PJ23, GPIO_FN_CRX0_CRX1_PJ22,
+	GPIO_FN_CTX0_CTX1_CTX2_PJ21, GPIO_FN_CRX0_CRX1_CRX2_PJ20,
 
 	/* DMAC */
 	GPIO_FN_TEND0, GPIO_FN_DACK0, GPIO_FN_DREQ0,
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7269.c b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
index 6cbb18ef77dc04ae..d20974a55d93add1 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7269.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7269.c
@@ -737,13 +737,12 @@ enum {
 	CRX0_MARK, CTX0_MARK,
 	CRX1_MARK, CTX1_MARK,
 	CRX2_MARK, CTX2_MARK,
-	CRX0_CRX1_MARK,
-	CRX0_CRX1_CRX2_MARK,
-	CTX0CTX1CTX2_MARK,
+	CRX0_CRX1_MARK, CTX0_CTX1_MARK,
+	CRX0_CRX1_CRX2_MARK, CTX0_CTX1_CTX2_MARK,
 	CRX1_PJ22_MARK, CTX1_PJ23_MARK,
 	CRX2_PJ20_MARK, CTX2_PJ21_MARK,
-	CRX0CRX1_PJ22_MARK,
-	CRX0CRX1CRX2_PJ20_MARK,
+	CRX0_CRX1_PJ22_MARK, CTX0_CTX1_PJ23_MARK,
+	CRX0_CRX1_CRX2_PJ20_MARK, CTX0_CTX1_CTX2_PJ21_MARK,
 
 	/* VDC */
 	DV_CLK_MARK,
@@ -821,6 +820,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CS3_MARK, PC8MD_001),
 	PINMUX_DATA(TXD7_MARK, PC8MD_010),
 	PINMUX_DATA(CTX1_MARK, PC8MD_011),
+	PINMUX_DATA(CTX0_CTX1_MARK, PC8MD_100),
 
 	PINMUX_DATA(PC7_DATA, PC7MD_000),
 	PINMUX_DATA(CKE_MARK, PC7MD_001),
@@ -833,11 +833,12 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(CAS_MARK, PC6MD_001),
 	PINMUX_DATA(SCK7_MARK, PC6MD_010),
 	PINMUX_DATA(CTX0_MARK, PC6MD_011),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC6MD_100),
 
 	PINMUX_DATA(PC5_DATA, PC5MD_000),
 	PINMUX_DATA(RAS_MARK, PC5MD_001),
 	PINMUX_DATA(CRX0_MARK, PC5MD_011),
-	PINMUX_DATA(CTX0CTX1CTX2_MARK, PC5MD_100),
+	PINMUX_DATA(CTX0_CTX1_CTX2_MARK, PC5MD_100),
 	PINMUX_DATA(IRQ0_PC_MARK, PC5MD_101),
 
 	PINMUX_DATA(PC4_DATA, PC4MD_00),
@@ -1289,30 +1290,32 @@ static const u16 pinmux_data[] = {
 	PINMUX_DATA(LCD_DATA23_PJ23_MARK, PJ23MD_010),
 	PINMUX_DATA(LCD_TCON6_MARK, PJ23MD_011),
 	PINMUX_DATA(IRQ3_PJ_MARK, PJ23MD_100),
-	PINMUX_DATA(CTX1_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX1_PJ23_MARK, PJ23MD_101),
+	PINMUX_DATA(CTX0_CTX1_PJ23_MARK, PJ23MD_110),
 
 	PINMUX_DATA(PJ22_DATA, PJ22MD_000),
 	PINMUX_DATA(DV_DATA22_MARK, PJ22MD_001),
 	PINMUX_DATA(LCD_DATA22_PJ22_MARK, PJ22MD_010),
 	PINMUX_DATA(LCD_TCON5_MARK, PJ22MD_011),
 	PINMUX_DATA(IRQ2_PJ_MARK, PJ22MD_100),
-	PINMUX_DATA(CRX1_MARK, PJ22MD_101),
-	PINMUX_DATA(CRX0_CRX1_MARK, PJ22MD_110),
+	PINMUX_DATA(CRX1_PJ22_MARK, PJ22MD_101),
+	PINMUX_DATA(CRX0_CRX1_PJ22_MARK, PJ22MD_110),
 
 	PINMUX_DATA(PJ21_DATA, PJ21MD_000),
 	PINMUX_DATA(DV_DATA21_MARK, PJ21MD_001),
 	PINMUX_DATA(LCD_DATA21_PJ21_MARK, PJ21MD_010),
 	PINMUX_DATA(LCD_TCON4_MARK, PJ21MD_011),
 	PINMUX_DATA(IRQ1_PJ_MARK, PJ21MD_100),
-	PINMUX_DATA(CTX2_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX2_PJ21_MARK, PJ21MD_101),
+	PINMUX_DATA(CTX0_CTX1_CTX2_PJ21_MARK, PJ21MD_110),
 
 	PINMUX_DATA(PJ20_DATA, PJ20MD_000),
 	PINMUX_DATA(DV_DATA20_MARK, PJ20MD_001),
 	PINMUX_DATA(LCD_DATA20_PJ20_MARK, PJ20MD_010),
 	PINMUX_DATA(LCD_TCON3_MARK, PJ20MD_011),
 	PINMUX_DATA(IRQ0_PJ_MARK, PJ20MD_100),
-	PINMUX_DATA(CRX2_MARK, PJ20MD_101),
-	PINMUX_DATA(CRX0CRX1CRX2_PJ20_MARK, PJ20MD_110),
+	PINMUX_DATA(CRX2_PJ20_MARK, PJ20MD_101),
+	PINMUX_DATA(CRX0_CRX1_CRX2_PJ20_MARK, PJ20MD_110),
 
 	PINMUX_DATA(PJ19_DATA, PJ19MD_000),
 	PINMUX_DATA(DV_DATA19_MARK, PJ19MD_001),
@@ -1663,12 +1666,24 @@ static const struct pinmux_func pinmux_func_gpios[] = {
 	GPIO_FN(WDTOVF),
 
 	/* CAN */
+	GPIO_FN(CTX2),
+	GPIO_FN(CRX2),
 	GPIO_FN(CTX1),
 	GPIO_FN(CRX1),
 	GPIO_FN(CTX0),
 	GPIO_FN(CRX0),
+	GPIO_FN(CTX0_CTX1),
 	GPIO_FN(CRX0_CRX1),
+	GPIO_FN(CTX0_CTX1_CTX2),
 	GPIO_FN(CRX0_CRX1_CRX2),
+	GPIO_FN(CTX2_PJ21),
+	GPIO_FN(CRX2_PJ20),
+	GPIO_FN(CTX1_PJ23),
+	GPIO_FN(CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_PJ23),
+	GPIO_FN(CRX0_CRX1_PJ22),
+	GPIO_FN(CTX0_CTX1_CTX2_PJ21),
+	GPIO_FN(CRX0_CRX1_CRX2_PJ20),
 
 	/* DMAC */
 	GPIO_FN(TEND0),
-- 
2.17.1


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18 19:48 [PATCH 0/6] pinctrl: sh-pfc: More miscellenaous fixes Geert Uytterhoeven
2019-12-18 19:48 ` [PATCH 1/6] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Geert Uytterhoeven
2019-12-18 19:48 ` [PATCH 2/6] pinctrl: sh-pfc: sh7264: Fix Port K I/O Register 0 definition Geert Uytterhoeven
2019-12-18 19:48 ` [PATCH 3/6] pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs Geert Uytterhoeven
2019-12-18 19:48 ` Geert Uytterhoeven [this message]
2019-12-18 19:48 ` [PATCH 5/6] sh: sh7264: Remove bogus SSU GPIO function definitions Geert Uytterhoeven
2019-12-18 19:48 ` [PATCH 6/6] sh: sh7269: " Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191218194812.12741-5-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=dalias@libc.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=ysato@users.sourceforge.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git