From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Kees Cook <keescook@chromium.org>,
Anton Vorontsov <anton@enomsg.org>,
Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH 7/8] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform)
Date: Sun, 21 Jun 2020 23:38:03 +0200 [thread overview]
Message-ID: <20200621213806.551879-8-konradybcio@gmail.com> (raw)
In-Reply-To: <20200621213806.551879-1-konradybcio@gmail.com>
Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.
XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 3 +
.../sdm630-sony-xperia-nile-discovery.dts | 13 ++
.../qcom/sdm630-sony-xperia-nile-pioneer.dts | 13 ++
.../qcom/sdm630-sony-xperia-nile-voyager.dts | 20 +++
.../dts/qcom/sdm630-sony-xperia-nile.dtsi | 136 ++++++++++++++++++
5 files changed, 185 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..1cad7cb07574 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -16,6 +16,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000000..2d7f0ceca4aa
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Discovery-RoW";
+ compatible = "sony,discovery-row", "qcom,sdm630", "qcom,sdm630-mtp";
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000000..45f794440d19
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Pioneer-RoW";
+ compatible = "sony,pioneer-row", "qcom,sdm630", "qcom,sdm630-mtp";
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000000..4c2b7fa9d0a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+ model = "SoMC Voyager-RoW";
+ compatible = "sony,voyager-row", "qcom,sdm630", "qcom,sdm630-mtp";
+
+ chosen {
+ framebuffer@9d400000 {
+ reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+ height = <2160>;
+ };
+ };
+};
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000000..39f1cffe9853
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <318 0>;
+ qcom,board-id = <8 1>;
+ qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+ /* This part enables graphical output via bootloader-enabled display */
+ chosen {
+ bootargs = "earlycon=tty0 console=tty0";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+ width = <1080>;
+ height = <1920>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ status= "okay";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc00000 0x0 0x100000>;
+ record-size = <0x10000>;
+ console-size = <0x60000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x20000>;
+ ecc-size = <16>;
+ status = "okay";
+ };
+
+ debug_region@ffb00000 {
+ reg = <0x00 0xffb00000 0x00 0x100000>;
+ no-map;
+ };
+
+ removed_region@85800000 {
+ reg = <0x00 0x85800000 0x00 0x3700000>;
+ no-map;
+ };
+ };
+
+ soc {
+ gpio_keys {
+ status = "okay";
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ camera_focus {
+ label = "Camera Focus";
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ debounce-interval = <15>;
+ };
+
+ camera_snapshot {
+ label = "Camera Snapshot";
+ gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ debounce-interval = <15>;
+ };
+
+ vol_down {
+ label = "Volume Down";
+ gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ sdhci@c0c4000 {
+ status = "okay";
+
+ /* SoMC Nile platform's eMMC doesn't support HS200 mode */
+ /delete-property/ mmc-hs200-1_8v;
+ };
+
+ i2c@c175000 {
+ status = "okay";
+
+ /* Synaptics touchscreen */
+ };
+
+ i2c@c176000 {
+ status = "okay";
+
+ /* SMB1351 charger */
+ };
+
+ /* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+ i2c@c1b6000 {
+ status = "okay";
+
+ /* NXP NFC */
+ };
+
+ serial@c1af000 {
+ status = "okay";
+ };
+ };
+
+};
\ No newline at end of file
--
2.27.0
next prev parent reply other threads:[~2020-06-21 21:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-21 21:37 [PATCH 0/8] Add support for Sony SDM630-based boards Konrad Dybcio
2020-06-21 21:37 ` [PATCH 1/8] pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility Konrad Dybcio
2020-06-21 21:37 ` [PATCH 2/8] Documentation: Document pm660(l) SPMI GPIOs compatible Konrad Dybcio
2020-06-21 21:37 ` [PATCH 3/8] soc: qcom: socinfo: Add socinfo entry for SDM630 Konrad Dybcio
2020-06-21 23:49 ` Alexey Minnekhanov
2020-06-21 21:38 ` [PATCH 4/8] clk: qcom: smd: Add support for SDM660 rpm clocks Konrad Dybcio
2020-06-22 0:22 ` Alexey Minnekhanov
2020-06-21 21:38 ` [PATCH 5/8] arm64: dts: qcom: pm660(l): Add base dts files Konrad Dybcio
2020-06-21 21:38 ` [PATCH 6/8] arm64: dts: qcom: sdm630: Add sdm630 dts file Konrad Dybcio
2020-06-22 0:07 ` Alexey Minnekhanov
2020-06-22 6:38 ` Konrad Dybcio
2020-06-21 21:38 ` Konrad Dybcio [this message]
2020-06-29 12:09 ` [PATCH 7/8] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) Pavel Machek
2020-06-29 12:15 ` Konrad Dybcio
2020-06-29 22:01 ` Pavel Machek
2020-06-21 21:38 ` [PATCH 8/8] arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) Konrad Dybcio
2020-06-21 21:51 ` Martin Botka
2020-06-21 22:04 ` Martin Botka
2020-06-29 12:09 ` Pavel Machek
2020-06-29 12:13 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200621213806.551879-8-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=anton@enomsg.org \
--cc=bjorn.andersson@linaro.org \
--cc=ccross@android.com \
--cc=devicetree@vger.kernel.org \
--cc=keescook@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=skrzynka@konradybcio.pl \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).