Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: "Andreas Färber" <afaerber@suse.de>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-actions@lists.infradead.org
Subject: Re: [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC
Date: Fri, 26 Jun 2020 16:06:41 +0300
Message-ID: <20200626130641.GA21994@BV030612LT> (raw)
In-Reply-To: <B6ED9520-2945-4181-8C3D-A1AA519248D9@linaro.org>

On Fri, Jun 26, 2020 at 12:50:46PM +0530, Manivannan Sadhasivam wrote:
> 
> 
> On 26 June 2020 1:46:18 AM IST, Cristian Ciocaltea <cristian.ciocaltea@gmail.com> wrote:
> >Add pinctrl and gpio bindings for Actions Semi S500 SoC.
> >
> >Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> >---
> > .../pinctrl/actions,s500-pinctrl.yaml         | 228 ++++++++++++++++++
> > 1 file changed, 228 insertions(+)
> >create mode 100644
> >Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >
> >diff --git
> >a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >new file mode 100644
> >index 000000000000..856947c70844
> >--- /dev/null
> >+++
> >b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> >@@ -0,0 +1,228 @@
> >+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >+%YAML 1.2
> >+---
> >+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
> >+$schema: http://devicetree.org/meta-schemas/core.yaml#
> >+
> >+title: Actions Semi S500 SoC pinmux & GPIO controller
> >+
> >+maintainers:
> >+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> 
> Feel free to add yourself as co-maintainer since you are the one contributing S500 support. 

Ok, thanks!

> 
> >+
> >+description: |
> >+  Pinmux & GPIO controller manages pin multiplexing & configuration
> >including
> >+  GPIO function selection & GPIO attributes configuration. Please
> >refer to
> >+  pinctrl-bindings.txt in this directory for common binding part and
> >usage.
> >+
> >+properties:
> >+  compatible:
> >+    const: actions,s500-pinctrl
> >+
> >+  reg:
> >+    minItems: 1
> >+    maxItems: 4
> 
> 4?
> 
> Thanks, 
> Mani

The pinctrl node in the owl-s500 DTS has a more granular specification
for the reg property, in order to exclude the unused ranges (i.e. PWM):

  reg = <0xb01b0000 0x40>, /* GPIO */
        <0xb01b0040 0x10>, <0xb01b0060 0x18>, <0xb01b0080 0xc>;

The complete node description is available in the related patch:
https://lore.kernel.org/lkml/b43c9d1a1ef689403bc17b2474aff20629b58263.1593124368.git.cristian.ciocaltea@gmail.com/

For the sake of simplicity, in the example below I used the contiguous
range. However, I've just noticed a copy/paste issue there, the correct
range should be <0xb01b0000 0x8c> - will be fixed in the next revision.

Thanks for reviewing,
Cristi

> 
> >+
> >+  clocks:
> >+    maxItems: 1
> >+
> >+  gpio-controller: true
> >+
> >+  gpio-ranges:
> >+    maxItems: 1
> >+
> >+  '#gpio-cells':
> >+    description:
> >+      Specifies the pin number and flags, as defined in
> >+      include/dt-bindings/gpio/gpio.h
> >+    const: 2
> >+
> >+  interrupt-controller: true
> >+
> >+  '#interrupt-cells':
> >+    description:
> >+      Specifies the pin number and flags, as defined in
> >+      include/dt-bindings/interrupt-controller/irq.h
> >+    const: 2
> >+
> >+  interrupts:
> >+    description:
> >+      One interrupt per each of the 5 GPIO ports supported by the
> >controller,
> >+      sorted by port number ascending order.
> >+    minItems: 5
> >+    maxItems: 5
> >+
> >+patternProperties:
> >+  '^.*$':
> >+    if:
> >+      type: object
> >+    then:
> >+      patternProperties:
> >+        'pinmux$':
> >+          type: object
> >+          description:
> >+            Pinctrl node's client devices specify pin muxes using
> >subnodes,
> >+            which in turn use the standard properties below.
> >+          $ref: pinmux-node.yaml#
> >+
> >+          properties:
> >+            groups:
> >+              description:
> >+                List of gpio pin groups affected by the functions
> >specified in
> >+                this subnode.
> >+              items:
> >+                oneOf:
> >+                  - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp,
> >rmii_txd0_mfp,
> >+                      rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp,
> >+                      rmii_rxd1_mfp, rmii_rxd0_mfp, rmii_ref_clk_mfp,
> >+                      i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp,
> >i2s1_pcm0_mfp,
> >+                      i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp,
> >+                      ks_in3_mfp, ks_out0_mfp, ks_out1_mfp,
> >ks_out2_mfp,
> >+                      lvds_o_pn_mfp, dsi_dn0_mfp, dsi_dp2_mfp,
> >lcd0_d17_mfp,
> >+                      dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
> >lvds_ee_pn_mfp,
> >+                      spi0_i2c_pcm_mfp, spi0_i2s_pcm_mfp,
> >dsi_dnp1_cp_mfp,
> >+                      lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
> >+                      uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp,
> >+                      sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
> >sd1_d0_d3_mfp,
> >+                      sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
> >uart0_rx_mfp,
> >+                      clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
> >+                      uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp,
> >sen0_pclk_mfp,
> >+                      pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp,
> >pcm1_out_mfp,
> >+                      dnand_data_wr_mfp, dnand_acle_ce0_mfp,
> >nand_ceb2_mfp,
> >+                      nand_ceb3_mfp]
> >+              minItems: 1
> >+              maxItems: 32
> >+
> >+            function:
> >+              description:
> >+                Specify the alternative function to be configured for
> >the
> >+                given gpio pin groups.
> >+              enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3,
> >sens0,
> >+                sens1, uart0, uart1, uart2, uart3, uart4, uart5,
> >uart6, i2s0,
> >+                i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3,
> >pwm4, pwm5,
> >+                p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30,
> >clko_25m,
> >+                mipi_csi, nand, spdif, ts, lcd0]
> >+
> >+          required:
> >+            - groups
> >+            - function
> >+
> >+          additionalProperties: false
> >+
> >+        'pinconf$':
> >+          type: object
> >+          description:
> >+            Pinctrl node's client devices specify pin configurations
> >using
> >+            subnodes, which in turn use the standard properties below.
> >+          $ref: pincfg-node.yaml#
> >+
> >+          properties:
> >+            groups:
> >+              description:
> >+                List of gpio pin groups affected by the drive-strength
> >property
> >+                specified in this subnode.
> >+              items:
> >+                oneOf:
> >+                  - enum: [sirq_drv, rmii_txd01_txen_drv,
> >rmii_rxer_drv,
> >+                      rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
> >+                      smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv,
> >i2s3_drv,
> >+                      i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv,
> >lvds_all_drv,
> >+                      lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv,
> >sd1_d0_d3_drv,
> >+                      sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv,
> >sd1_clk_drv,
> >+                      spi0_all_drv, uart0_rx_drv, uart0_tx_drv,
> >uart2_all_drv,
> >+                      i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
> >+                      sens0_ckout_drv, uart3_all_drv]
> >+              minItems: 1
> >+              maxItems: 32
> >+
> >+            pins:
> >+              description:
> >+                List of gpio pins affected by the bias-pull-* and
> >+                input-schmitt-* properties specified in this subnode.
> >+              items:
> >+                oneOf:
> >+                  - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1,
> >eth_txen,
> >+                      eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0,
> >eth_ref_clk,
> >+                      eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0,
> >i2s_bclk0,
> >+                      i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1,
> >i2s_lrclk1,
> >+                      i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3,
> >ks_out0,
> >+                      ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
> >lvds_odn,
> >+                      lvds_ocp, lvds_ocn, lvds_obp, lvds_obn,
> >lvds_oap,
> >+                      lvds_oan, lvds_eep, lvds_een, lvds_edp,
> >lvds_edn,
> >+                      lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn,
> >lvds_eap,
> >+                      lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3, dsi_dn3,
> >dsi_dp1,
> >+                      dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
> >dsi_dp2,
> >+                      dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
> >sd1_d1,
> >+                      sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd,
> >sd1_clk,
> >+                      spi0_sclk, spi0_ss, spi0_miso, spi0_mosi,
> >uart0_rx,
> >+                      uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
> >+                      sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0,
> >+                      dnand_ceb1, dnand_ceb2, dnand_ceb3, uart2_rx,
> >uart2_tx,
> >+                      uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
> >uart3_rtsb,
> >+                      uart3_ctsb, pcm1_in, pcm1_clk, pcm1_sync,
> >pcm1_out,
> >+                      i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata,
> >csi_dn0,
> >+                      csi_dp0, csi_dn1, csi_dp1, csi_dn2, csi_dp2,
> >csi_dn3,
> >+                      csi_dp3, csi_cn, csi_cp, dnand_d0, dnand_d1,
> >dnand_d2,
> >+                      dnand_d3, dnand_d4, dnand_d5, dnand_d6,
> >dnand_d7,
> >+                      dnand_rb, dnand_rdb, dnand_rdbn, dnand_wrb,
> >porb,
> >+                      clko_25m, bsel, pkg0, pkg1, pkg2, pkg3]
> >+              minItems: 1
> >+              maxItems: 64
> >+
> >+            bias-pull-up: true
> >+            bias-pull-down: true
> >+
> >+            drive-strength:
> >+              description:
> >+                Selects the drive strength for the specified pins, in
> >mA.
> >+              enum: [2, 4, 8, 12]
> >+
> >+            input-schmitt-enable: true
> >+            input-schmitt-disable: true
> >+
> >+          additionalProperties: false
> >+
> >+required:
> >+  - compatible
> >+  - reg
> >+  - clocks
> >+  - gpio-controller
> >+  - gpio-ranges
> >+  - '#gpio-cells'
> >+  - interrupt-controller
> >+  - '#interrupt-cells'
> >+  - interrupts
> >+
> >+additionalProperties: false
> >+
> >+examples:
> >+  - |
> >+    #include <dt-bindings/interrupt-controller/arm-gic.h>
> >+    pinctrl: pinctrl@b01b0000 {
> >+        compatible = "actions,s500-pinctrl";
> >+        reg = <0xe01b0000 0x1000>;
> >+        clocks = <&cmu 20>;
> >+        gpio-controller;
> >+        gpio-ranges = <&pinctrl 0 0 132>;
> >+        #gpio-cells = <2>;
> >+        interrupt-controller;
> >+        #interrupt-cells = <2>;
> >+        interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> >+                     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> >+                     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> >+                     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> >+                     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> >+
> >+        i2c0_default: i2c0_default {
> >+            pinmux {
> >+                groups = "i2c0_mfp";
> >+                function = "i2c0";
> >+            };
> >+
> >+            pinconf {
> >+                pins = "i2c0_sclk", "i2c0_sdata";
> >+                bias-pull-up;
> >+            };
> >+        };
> >+    };
> >+
> >+...
> 
> -- 
> Sent from my Android device with K-9 Mail. Please excuse my brevity.

  reply index

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 20:16 [PATCH 0/3] Add Actions Semi S500 pinctrl support Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC Cristian Ciocaltea
2020-06-26  7:20   ` Manivannan Sadhasivam
2020-06-26 13:06     ` Cristian Ciocaltea [this message]
2020-08-01 14:46       ` Manivannan Sadhasivam
2020-08-02  9:35         ` Cristian Ciocaltea
2020-07-15 20:03   ` Rob Herring
2020-07-16 10:43     ` Cristian Ciocaltea
2020-07-16 14:50       ` Rob Herring
2020-07-16 21:26         ` Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 2/3] pinctrl: actions: Add Actions S500 pinctrl driver Cristian Ciocaltea
2020-06-26 14:29   ` Manivannan Sadhasivam
2020-06-26 17:11     ` Cristian Ciocaltea
2020-08-02 15:18       ` Manivannan Sadhasivam
2020-08-03 14:32         ` Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 3/3] MAINTAINERS: Add pinctrl binding entry for Actions Semi S500 Cristian Ciocaltea
2020-06-26  7:27   ` Manivannan Sadhasivam
2020-06-26 16:25     ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200626130641.GA21994@BV030612LT \
    --to=cristian.ciocaltea@gmail.com \
    --cc=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git