Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/3] Add Actions Semi S500 pinctrl support
@ 2020-06-25 20:16 Cristian Ciocaltea
  2020-06-25 20:16 ` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC Cristian Ciocaltea
                   ` (2 more replies)
  0 siblings, 3 replies; 18+ messages in thread
From: Cristian Ciocaltea @ 2020-06-25 20:16 UTC (permalink / raw)
  To: Andreas Färber, Manivannan Sadhasivam, Linus Walleij, Rob Herring
  Cc: linux-arm-kernel, linux-gpio, devicetree, linux-kernel, linux-actions

This patchset adds pinctrl support for Actions Semi S500 SoC.

Pinmux functions are only accessible for pin groups while pinconf
parameters are available for both pin groups and individual pins.

The pinctrl driver has been verified using RoseapplePi, the SBC for
which an initial support has been provided via:
https://lore.kernel.org/lkml/cover.1592123160.git.cristian.ciocaltea@gmail.com/

The DTS related changes, including the required clock support, will be
available in the upcoming patch series.

Thanks,
Cristi

Cristian Ciocaltea (3):
  dt-bindings: pinctrl: Add bindings for Actions S500 SoC
  pinctrl: actions: Add Actions S500 pinctrl driver
  MAINTAINERS: Add pinctrl binding entry for Actions Semi S500

 .../pinctrl/actions,s500-pinctrl.yaml         |  228 +++
 MAINTAINERS                                   |    1 +
 drivers/pinctrl/actions/Kconfig               |    6 +
 drivers/pinctrl/actions/Makefile              |    1 +
 drivers/pinctrl/actions/pinctrl-s500.c        | 1727 +++++++++++++++++
 5 files changed, 1963 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
 create mode 100644 drivers/pinctrl/actions/pinctrl-s500.c

-- 
2.27.0


^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, back to index

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-25 20:16 [PATCH 0/3] Add Actions Semi S500 pinctrl support Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC Cristian Ciocaltea
2020-06-26  7:20   ` Manivannan Sadhasivam
2020-06-26 13:06     ` Cristian Ciocaltea
2020-08-01 14:46       ` Manivannan Sadhasivam
2020-08-02  9:35         ` Cristian Ciocaltea
2020-07-15 20:03   ` Rob Herring
2020-07-16 10:43     ` Cristian Ciocaltea
2020-07-16 14:50       ` Rob Herring
2020-07-16 21:26         ` Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 2/3] pinctrl: actions: Add Actions S500 pinctrl driver Cristian Ciocaltea
2020-06-26 14:29   ` Manivannan Sadhasivam
2020-06-26 17:11     ` Cristian Ciocaltea
2020-08-02 15:18       ` Manivannan Sadhasivam
2020-08-03 14:32         ` Cristian Ciocaltea
2020-06-25 20:16 ` [PATCH 3/3] MAINTAINERS: Add pinctrl binding entry for Actions Semi S500 Cristian Ciocaltea
2020-06-26  7:27   ` Manivannan Sadhasivam
2020-06-26 16:25     ` Cristian Ciocaltea

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git