[PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver

[PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver

[Bartosz Dudziak]

Binding and driver for the Qualcomm MSM8226 TLMM pinctrl block

Bartosz Dudziak (2):
  dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings
  pinctrl: qcom: Add msm8226 pinctrl driver.

 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++
 drivers/pinctrl/qcom/Kconfig                  |   9 +
 drivers/pinctrl/qcom/Makefile                 |   1 +
 drivers/pinctrl/qcom/pinctrl-msm8226.c        | 631 ++++++++++++++++++
 4 files changed, 764 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8226.c

-- 
2.25.1

[PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings

[Bartosz Dudziak]

Add device tree binding Documentation details for Qualcomm msm8226
pinctrl driver.

- Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
  Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
  msm8226 content

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++++++++++++++++
 1 file changed, 123 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..8d8dc15718
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  MSM8226 platform.
+
+properties:
+  compatible:
+    const: qcom,msm8226-pinctrl
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '^.*$':
+    if:
+      type: object
+    then:
+      properties:
+        pins:
+          description:
+            List of gpio pins affected by the properties specified in this
+            subnode.
+          items:
+            oneOf:
+              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+              - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+          minItems: 1
+          maxItems: 36
+
+        function:
+          description:
+            Specify the alternative function to be configured for the specified
+            pins. Functions are only valid for gpio pins.
+
+          enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+            blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+            blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+            blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+        drive-strength:
+          enum: [2, 4, 6, 8, 10, 12, 14, 16]
+          default: 2
+          description:
+            Selects the drive strength for the specified pins, in mA.
+
+        bias-pull-down: true
+
+        bias-pull-up: true
+
+        bias-disable: true
+
+        output-high: true
+
+        output-low: true
+
+      required:
+        - pins
+        - function
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        msmgpio: pinctrl@fd510000 {
+                compatible = "qcom,msm8226-pinctrl";
+                reg = <0xfd510000 0x4000>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&msmgpio 0 0 117>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        };
-- 
2.25.1

Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings

[Rob Herring]

On Sat, Jun 27, 2020 at 09:28:30PM +0200, Bartosz Dudziak wrote:
> Add device tree binding Documentation details for Qualcomm msm8226
> pinctrl driver.
> 
> - Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
>   Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
>   msm8226 content
> 
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
>  .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++++++++++++++++
>  1 file changed, 123 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> new file mode 100644
> index 0000000000..8d8dc15718
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. MSM8226 TLMM block
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description: |
> +  This binding describes the Top Level Mode Multiplexer block found in the
> +  MSM8226 platform.
> +
> +properties:
> +  compatible:
> +    const: qcom,msm8226-pinctrl
> +
> +  reg:
> +    description: Specifies the base address and size of the TLMM register space
> +    maxItems: 1
> +
> +  interrupts:
> +    description: Specifies the TLMM summary IRQ
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    description: Specifies the PIN numbers and Flags, as defined in
> +      include/dt-bindings/interrupt-controller/irq.h
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    description: Specifying the pin number and flags, as defined in
> +      include/dt-bindings/gpio/gpio.h
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  gpio-reserved-ranges:
> +    maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> +  '^.*$':
> +    if:
> +      type: object

For new bindings, do '-pins$' for the node name pattern so we don't have 
to do this hack.

> +    then:
> +      properties:
> +        pins:
> +          description:
> +            List of gpio pins affected by the properties specified in this
> +            subnode.
> +          items:
> +            oneOf:
> +              - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
> +              - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> +          minItems: 1
> +          maxItems: 36
> +
> +        function:
> +          description:
> +            Specify the alternative function to be configured for the specified
> +            pins. Functions are only valid for gpio pins.
> +
> +          enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
> +            blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
> +            blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
> +            blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
> +
> +        drive-strength:
> +          enum: [2, 4, 6, 8, 10, 12, 14, 16]
> +          default: 2
> +          description:
> +            Selects the drive strength for the specified pins, in mA.
> +
> +        bias-pull-down: true
> +
> +        bias-pull-up: true
> +
> +        bias-disable: true
> +
> +        output-high: true
> +
> +        output-low: true
> +
> +      required:
> +        - pins
> +        - function
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - '#interrupt-cells'
> +  - gpio-controller
> +  - '#gpio-cells'
> +  - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +        #include <dt-bindings/interrupt-controller/arm-gic.h>
> +        msmgpio: pinctrl@fd510000 {
> +                compatible = "qcom,msm8226-pinctrl";
> +                reg = <0xfd510000 0x4000>;
> +
> +                gpio-controller;
> +                #gpio-cells = <2>;
> +                gpio-ranges = <&msmgpio 0 0 117>;
> +                interrupt-controller;
> +                #interrupt-cells = <2>;
> +                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +        };
> -- 
> 2.25.1
> 

Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings

[Bartosz Dudziak]

On Wed, Jul 15, 2020 at 02:24:13PM -0600, Rob Herring wrote:
> On Sat, Jun 27, 2020 at 09:28:30PM +0200, Bartosz Dudziak wrote:
> > Add device tree binding Documentation details for Qualcomm msm8226
> > pinctrl driver.
> > 
> > - Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
> >   Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
> >   msm8226 content
> > 
> > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> > ---
> >  .../pinctrl/qcom,msm8226-pinctrl.yaml         | 123 ++++++++++++++++++
> >  1 file changed, 123 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> > new file mode 100644
> > index 0000000000..8d8dc15718
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies, Inc. MSM8226 TLMM block
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description: |
> > +  This binding describes the Top Level Mode Multiplexer block found in the
> > +  MSM8226 platform.
> > +
> > +properties:
> > +  compatible:
> > +    const: qcom,msm8226-pinctrl
> > +
> > +  reg:
> > +    description: Specifies the base address and size of the TLMM register space
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    description: Specifies the TLMM summary IRQ
> > +    maxItems: 1
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    description: Specifies the PIN numbers and Flags, as defined in
> > +      include/dt-bindings/interrupt-controller/irq.h
> > +    const: 2
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    description: Specifying the pin number and flags, as defined in
> > +      include/dt-bindings/gpio/gpio.h
> > +    const: 2
> > +
> > +  gpio-ranges:
> > +    maxItems: 1
> > +
> > +  gpio-reserved-ranges:
> > +    maxItems: 1
> > +
> > +#PIN CONFIGURATION NODES
> > +patternProperties:
> > +  '^.*$':
> > +    if:
> > +      type: object
> 
> For new bindings, do '-pins$' for the node name pattern so we don't have 
> to do this hack.
> 

I have changed the name pattern and sent a v2 patch.

[PATCH 2/2] pinctrl: qcom: Add msm8226 pinctrl driver.

[Bartosz Dudziak]

Add initial Qualcomm msm8226 pinctrl driver to support pin configuration
with pinctrl framework for msm8226 SoC.

- Initial formatting and style was taken from the msm8x74 pinctrl driver
  added by Björn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
 drivers/pinctrl/qcom/Kconfig           |   9 +
 drivers/pinctrl/qcom/Makefile          |   1 +
 drivers/pinctrl/qcom/pinctrl-msm8226.c | 631 +++++++++++++++++++++++++
 3 files changed, 641 insertions(+)
 create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8226.c

diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index ff1ee159dc..97ddc535fc 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -60,6 +60,15 @@ config PINCTRL_IPQ6018
 	  Qualcomm Technologies Inc. IPQ6018 platform. Select this for
 	  IPQ6018.
 
+config PINCTRL_MSM8226
+	tristate "Qualcomm 8226 pin controller driver"
+	depends on GPIOLIB && OF
+	select PINCTRL_MSM
+	help
+	  This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+	  Qualcomm Technologies Inc TLMM block found on the Qualcomm
+	  Technologies Inc MSM8226 platform.
+
 config PINCTRL_MSM8660
 	tristate "Qualcomm 8660 pin controller driver"
 	depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 061ec9fb65..9e3d9c91a4 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_IPQ4019)	+= pinctrl-ipq4019.o
 obj-$(CONFIG_PINCTRL_IPQ8064)	+= pinctrl-ipq8064.o
 obj-$(CONFIG_PINCTRL_IPQ8074)	+= pinctrl-ipq8074.o
 obj-$(CONFIG_PINCTRL_IPQ6018)	+= pinctrl-ipq6018.o
+obj-$(CONFIG_PINCTRL_MSM8226)	+= pinctrl-msm8226.o
 obj-$(CONFIG_PINCTRL_MSM8660)	+= pinctrl-msm8660.o
 obj-$(CONFIG_PINCTRL_MSM8960)	+= pinctrl-msm8960.o
 obj-$(CONFIG_PINCTRL_MSM8X74)	+= pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8226.c b/drivers/pinctrl/qcom/pinctrl-msm8226.c
new file mode 100644
index 0000000000..82010703c3
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-msm8226.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const struct pinctrl_pin_desc msm8226_pins[] = {
+	PINCTRL_PIN(0, "GPIO_0"),
+	PINCTRL_PIN(1, "GPIO_1"),
+	PINCTRL_PIN(2, "GPIO_2"),
+	PINCTRL_PIN(3, "GPIO_3"),
+	PINCTRL_PIN(4, "GPIO_4"),
+	PINCTRL_PIN(5, "GPIO_5"),
+	PINCTRL_PIN(6, "GPIO_6"),
+	PINCTRL_PIN(7, "GPIO_7"),
+	PINCTRL_PIN(8, "GPIO_8"),
+	PINCTRL_PIN(9, "GPIO_9"),
+	PINCTRL_PIN(10, "GPIO_10"),
+	PINCTRL_PIN(11, "GPIO_11"),
+	PINCTRL_PIN(12, "GPIO_12"),
+	PINCTRL_PIN(13, "GPIO_13"),
+	PINCTRL_PIN(14, "GPIO_14"),
+	PINCTRL_PIN(15, "GPIO_15"),
+	PINCTRL_PIN(16, "GPIO_16"),
+	PINCTRL_PIN(17, "GPIO_17"),
+	PINCTRL_PIN(18, "GPIO_18"),
+	PINCTRL_PIN(19, "GPIO_19"),
+	PINCTRL_PIN(20, "GPIO_20"),
+	PINCTRL_PIN(21, "GPIO_21"),
+	PINCTRL_PIN(22, "GPIO_22"),
+	PINCTRL_PIN(23, "GPIO_23"),
+	PINCTRL_PIN(24, "GPIO_24"),
+	PINCTRL_PIN(25, "GPIO_25"),
+	PINCTRL_PIN(26, "GPIO_26"),
+	PINCTRL_PIN(27, "GPIO_27"),
+	PINCTRL_PIN(28, "GPIO_28"),
+	PINCTRL_PIN(29, "GPIO_29"),
+	PINCTRL_PIN(30, "GPIO_30"),
+	PINCTRL_PIN(31, "GPIO_31"),
+	PINCTRL_PIN(32, "GPIO_32"),
+	PINCTRL_PIN(33, "GPIO_33"),
+	PINCTRL_PIN(34, "GPIO_34"),
+	PINCTRL_PIN(35, "GPIO_35"),
+	PINCTRL_PIN(36, "GPIO_36"),
+	PINCTRL_PIN(37, "GPIO_37"),
+	PINCTRL_PIN(38, "GPIO_38"),
+	PINCTRL_PIN(39, "GPIO_39"),
+	PINCTRL_PIN(40, "GPIO_40"),
+	PINCTRL_PIN(41, "GPIO_41"),
+	PINCTRL_PIN(42, "GPIO_42"),
+	PINCTRL_PIN(43, "GPIO_43"),
+	PINCTRL_PIN(44, "GPIO_44"),
+	PINCTRL_PIN(45, "GPIO_45"),
+	PINCTRL_PIN(46, "GPIO_46"),
+	PINCTRL_PIN(47, "GPIO_47"),
+	PINCTRL_PIN(48, "GPIO_48"),
+	PINCTRL_PIN(49, "GPIO_49"),
+	PINCTRL_PIN(50, "GPIO_50"),
+	PINCTRL_PIN(51, "GPIO_51"),
+	PINCTRL_PIN(52, "GPIO_52"),
+	PINCTRL_PIN(53, "GPIO_53"),
+	PINCTRL_PIN(54, "GPIO_54"),
+	PINCTRL_PIN(55, "GPIO_55"),
+	PINCTRL_PIN(56, "GPIO_56"),
+	PINCTRL_PIN(57, "GPIO_57"),
+	PINCTRL_PIN(58, "GPIO_58"),
+	PINCTRL_PIN(59, "GPIO_59"),
+	PINCTRL_PIN(60, "GPIO_60"),
+	PINCTRL_PIN(61, "GPIO_61"),
+	PINCTRL_PIN(62, "GPIO_62"),
+	PINCTRL_PIN(63, "GPIO_63"),
+	PINCTRL_PIN(64, "GPIO_64"),
+	PINCTRL_PIN(65, "GPIO_65"),
+	PINCTRL_PIN(66, "GPIO_66"),
+	PINCTRL_PIN(67, "GPIO_67"),
+	PINCTRL_PIN(68, "GPIO_68"),
+	PINCTRL_PIN(69, "GPIO_69"),
+	PINCTRL_PIN(70, "GPIO_70"),
+	PINCTRL_PIN(71, "GPIO_71"),
+	PINCTRL_PIN(72, "GPIO_72"),
+	PINCTRL_PIN(73, "GPIO_73"),
+	PINCTRL_PIN(74, "GPIO_74"),
+	PINCTRL_PIN(75, "GPIO_75"),
+	PINCTRL_PIN(76, "GPIO_76"),
+	PINCTRL_PIN(77, "GPIO_77"),
+	PINCTRL_PIN(78, "GPIO_78"),
+	PINCTRL_PIN(79, "GPIO_79"),
+	PINCTRL_PIN(80, "GPIO_80"),
+	PINCTRL_PIN(81, "GPIO_81"),
+	PINCTRL_PIN(82, "GPIO_82"),
+	PINCTRL_PIN(83, "GPIO_83"),
+	PINCTRL_PIN(84, "GPIO_84"),
+	PINCTRL_PIN(85, "GPIO_85"),
+	PINCTRL_PIN(86, "GPIO_86"),
+	PINCTRL_PIN(87, "GPIO_87"),
+	PINCTRL_PIN(88, "GPIO_88"),
+	PINCTRL_PIN(89, "GPIO_89"),
+	PINCTRL_PIN(90, "GPIO_90"),
+	PINCTRL_PIN(91, "GPIO_91"),
+	PINCTRL_PIN(92, "GPIO_92"),
+	PINCTRL_PIN(93, "GPIO_93"),
+	PINCTRL_PIN(94, "GPIO_94"),
+	PINCTRL_PIN(95, "GPIO_95"),
+	PINCTRL_PIN(96, "GPIO_96"),
+	PINCTRL_PIN(97, "GPIO_97"),
+	PINCTRL_PIN(98, "GPIO_98"),
+	PINCTRL_PIN(99, "GPIO_99"),
+	PINCTRL_PIN(100, "GPIO_100"),
+	PINCTRL_PIN(101, "GPIO_101"),
+	PINCTRL_PIN(102, "GPIO_102"),
+	PINCTRL_PIN(103, "GPIO_103"),
+	PINCTRL_PIN(104, "GPIO_104"),
+	PINCTRL_PIN(105, "GPIO_105"),
+	PINCTRL_PIN(106, "GPIO_106"),
+	PINCTRL_PIN(107, "GPIO_107"),
+	PINCTRL_PIN(108, "GPIO_108"),
+	PINCTRL_PIN(109, "GPIO_109"),
+	PINCTRL_PIN(110, "GPIO_110"),
+	PINCTRL_PIN(111, "GPIO_111"),
+	PINCTRL_PIN(112, "GPIO_112"),
+	PINCTRL_PIN(113, "GPIO_113"),
+	PINCTRL_PIN(114, "GPIO_114"),
+	PINCTRL_PIN(115, "GPIO_115"),
+	PINCTRL_PIN(116, "GPIO_116"),
+
+	PINCTRL_PIN(117, "SDC1_CLK"),
+	PINCTRL_PIN(118, "SDC1_CMD"),
+	PINCTRL_PIN(119, "SDC1_DATA"),
+	PINCTRL_PIN(120, "SDC2_CLK"),
+	PINCTRL_PIN(121, "SDC2_CMD"),
+	PINCTRL_PIN(122, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+
+static const unsigned int sdc1_clk_pins[] = { 117 };
+static const unsigned int sdc1_cmd_pins[] = { 118 };
+static const unsigned int sdc1_data_pins[] = { 119 };
+static const unsigned int sdc2_clk_pins[] = { 120 };
+static const unsigned int sdc2_cmd_pins[] = { 121 };
+static const unsigned int sdc2_data_pins[] = { 122 };
+
+#define FUNCTION(fname)					\
+	[MSM_MUX_##fname] = {				\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7)	\
+	{						\
+		.name = "gpio" #id,			\
+		.pins = gpio##id##_pins,		\
+		.npins = ARRAY_SIZE(gpio##id##_pins),	\
+		.funcs = (int[]){			\
+			MSM_MUX_gpio,			\
+			MSM_MUX_##f1,			\
+			MSM_MUX_##f2,			\
+			MSM_MUX_##f3,			\
+			MSM_MUX_##f4,			\
+			MSM_MUX_##f5,			\
+			MSM_MUX_##f6,			\
+			MSM_MUX_##f7			\
+		},					\
+		.nfuncs = 8,				\
+		.ctl_reg = 0x1000 + 0x10 * id,		\
+		.io_reg = 0x1004 + 0x10 * id,		\
+		.intr_cfg_reg = 0x1008 + 0x10 * id,	\
+		.intr_status_reg = 0x100c + 0x10 * id,	\
+		.intr_target_reg = 0x1008 + 0x10 * id,	\
+		.mux_bit = 2,				\
+		.pull_bit = 0,				\
+		.drv_bit = 6,				\
+		.oe_bit = 9,				\
+		.in_bit = 0,				\
+		.out_bit = 1,				\
+		.intr_enable_bit = 0,			\
+		.intr_status_bit = 0,			\
+		.intr_target_bit = 5,			\
+		.intr_target_kpss_val = 4,		\
+		.intr_raw_status_bit = 4,		\
+		.intr_polarity_bit = 1,			\
+		.intr_detection_bit = 2,		\
+		.intr_detection_width = 2,		\
+	}
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv)		\
+	{						\
+		.name = #pg_name,			\
+		.pins = pg_name##_pins,			\
+		.npins = ARRAY_SIZE(pg_name##_pins),	\
+		.ctl_reg = ctl,				\
+		.io_reg = 0,				\
+		.intr_cfg_reg = 0,			\
+		.intr_status_reg = 0,			\
+		.intr_target_reg = 0,			\
+		.mux_bit = -1,				\
+		.pull_bit = pull,			\
+		.drv_bit = drv,				\
+		.oe_bit = -1,				\
+		.in_bit = -1,				\
+		.out_bit = -1,				\
+		.intr_enable_bit = -1,			\
+		.intr_status_bit = -1,			\
+		.intr_target_bit = -1,			\
+		.intr_target_kpss_val = -1,		\
+		.intr_raw_status_bit = -1,		\
+		.intr_polarity_bit = -1,		\
+		.intr_detection_bit = -1,		\
+		.intr_detection_width = -1,		\
+	}
+
+/*
+ * TODO: Add the rest of the possible functions and fill out
+ * the pingroup table below.
+ */
+enum msm8226_functions {
+	MSM_MUX_gpio,
+	MSM_MUX_cci_i2c0,
+	MSM_MUX_blsp_i2c1,
+	MSM_MUX_blsp_i2c2,
+	MSM_MUX_blsp_i2c3,
+	MSM_MUX_blsp_i2c5,
+	MSM_MUX_blsp_spi1,
+	MSM_MUX_blsp_spi2,
+	MSM_MUX_blsp_spi3,
+	MSM_MUX_blsp_spi5,
+	MSM_MUX_blsp_uart1,
+	MSM_MUX_blsp_uart2,
+	MSM_MUX_blsp_uart3,
+	MSM_MUX_blsp_uart5,
+	MSM_MUX_blsp_uim1,
+	MSM_MUX_blsp_uim2,
+	MSM_MUX_blsp_uim3,
+	MSM_MUX_blsp_uim5,
+	MSM_MUX_cam_mclk0,
+	MSM_MUX_cam_mclk1,
+	MSM_MUX_wlan,
+	MSM_MUX_NA,
+};
+
+static const char * const gpio_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+	"gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+	"gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+	"gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+	"gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+	"gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+	"gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+	"gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+	"gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+	"gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+	"gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+	"gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+	"gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+	"gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+	"gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+	"gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+	"gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+};
+
+static const char * const blsp_uart1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3"
+};
+
+static const char * const blsp_uim1_groups[] = { "gpio0", "gpio1" };
+static const char * const blsp_i2c1_groups[] = { "gpio2", "gpio3" };
+static const char * const blsp_spi1_groups[] = {
+	"gpio0", "gpio1", "gpio2", "gpio3"
+};
+
+static const char * const blsp_uart2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+static const char * const blsp_uim2_groups[] = { "gpio4", "gpio5" };
+static const char * const blsp_i2c2_groups[] = { "gpio6", "gpio7" };
+static const char * const blsp_spi2_groups[] = {
+	"gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+static const char * const blsp_uart3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11"
+};
+
+static const char * const blsp_uim3_groups[] = { "gpio8", "gpio9" };
+static const char * const blsp_i2c3_groups[] = { "gpio10", "gpio11" };
+static const char * const blsp_spi3_groups[] = {
+	"gpio8", "gpio9", "gpio10", "gpio11"
+};
+
+static const char * const blsp_uart5_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19"
+};
+
+static const char * const blsp_uim5_groups[] = { "gpio16", "gpio17" };
+static const char * const blsp_i2c5_groups[] = { "gpio18", "gpio19" };
+static const char * const blsp_spi5_groups[] = {
+	"gpio16", "gpio17", "gpio18", "gpio19"
+};
+
+static const char * const cci_i2c0_groups[] = { "gpio29", "gpio30" };
+
+static const char * const cam_mclk0_groups[] = { "gpio26" };
+static const char * const cam_mclk1_groups[] = { "gpio27" };
+
+static const char * const wlan_groups[] = {
+	"gpio40", "gpio41", "gpio42", "gpio43", "gpio44"
+};
+
+static const struct msm_function msm8226_functions[] = {
+	FUNCTION(gpio),
+	FUNCTION(cci_i2c0),
+	FUNCTION(blsp_uim1),
+	FUNCTION(blsp_uim2),
+	FUNCTION(blsp_uim3),
+	FUNCTION(blsp_uim5),
+	FUNCTION(blsp_i2c1),
+	FUNCTION(blsp_i2c2),
+	FUNCTION(blsp_i2c3),
+	FUNCTION(blsp_i2c5),
+	FUNCTION(blsp_spi1),
+	FUNCTION(blsp_spi2),
+	FUNCTION(blsp_spi3),
+	FUNCTION(blsp_spi5),
+	FUNCTION(blsp_uart1),
+	FUNCTION(blsp_uart2),
+	FUNCTION(blsp_uart3),
+	FUNCTION(blsp_uart5),
+	FUNCTION(cam_mclk0),
+	FUNCTION(cam_mclk1),
+	FUNCTION(wlan),
+};
+
+static const struct msm_pingroup msm8226_groups[] = {
+	PINGROUP(0,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+	PINGROUP(1,   blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+	PINGROUP(2,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+	PINGROUP(3,   blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+	PINGROUP(4,   blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+	PINGROUP(5,   blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+	PINGROUP(6,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+	PINGROUP(7,   blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+	PINGROUP(8,   blsp_spi3, blsp_uart3, blsp_uim3, NA, NA, NA, NA),
+	PINGROUP(9,   blsp_spi3, blsp_uart3, blsp_uim3, NA, NA, NA, NA),
+	PINGROUP(10,  blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+	PINGROUP(11,  blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+	PINGROUP(12,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(13,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(14,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(15,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(16,  blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+	PINGROUP(17,  blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+	PINGROUP(18,  blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+	PINGROUP(19,  blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+	PINGROUP(20,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(21,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(22,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(23,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(24,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(25,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(26,  cam_mclk0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(27,  cam_mclk1, NA, NA, NA, NA, NA, NA),
+	PINGROUP(28,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(29,  cci_i2c0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(30,  cci_i2c0, NA, NA, NA, NA, NA, NA),
+	PINGROUP(31,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(32,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(33,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(34,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(35,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(36,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(37,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(38,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(39,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(40,  wlan, NA, NA, NA, NA, NA, NA),
+	PINGROUP(41,  wlan, NA, NA, NA, NA, NA, NA),
+	PINGROUP(42,  wlan, NA, NA, NA, NA, NA, NA),
+	PINGROUP(43,  wlan, NA, NA, NA, NA, NA, NA),
+	PINGROUP(44,  wlan, NA, NA, NA, NA, NA, NA),
+	PINGROUP(45,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(46,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(47,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(48,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(49,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(50,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(51,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(52,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(53,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(54,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(55,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(56,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(57,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(58,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(59,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(60,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(61,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(62,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(63,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(64,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(65,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(66,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(67,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(68,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(69,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(70,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(71,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(72,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(73,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(74,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(75,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(76,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(77,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(78,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(79,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(80,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(81,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(82,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(83,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(84,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(85,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(86,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(87,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(88,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(89,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(90,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(91,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(92,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(93,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(94,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(95,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(96,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(97,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(98,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(99,  NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(100, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(101, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(102, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(103, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(104, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(105, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(106, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(107, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(108, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(109, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(110, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(111, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(112, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(113, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(114, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(115, NA, NA, NA, NA, NA, NA, NA),
+	PINGROUP(116, NA, NA, NA, NA, NA, NA, NA),
+	SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+	SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+	SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+	SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+	SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+	SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 117
+
+static const struct msm_pinctrl_soc_data msm8226_pinctrl = {
+	.pins = msm8226_pins,
+	.npins = ARRAY_SIZE(msm8226_pins),
+	.functions = msm8226_functions,
+	.nfunctions = ARRAY_SIZE(msm8226_functions),
+	.groups = msm8226_groups,
+	.ngroups = ARRAY_SIZE(msm8226_groups),
+	.ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int msm8226_pinctrl_probe(struct platform_device *pdev)
+{
+	return msm_pinctrl_probe(pdev, &msm8226_pinctrl);
+}
+
+static const struct of_device_id msm8226_pinctrl_of_match[] = {
+	{ .compatible = "qcom,msm8226-pinctrl", },
+	{ },
+};
+
+static struct platform_driver msm8226_pinctrl_driver = {
+	.driver = {
+		.name = "msm8226-pinctrl",
+		.of_match_table = msm8226_pinctrl_of_match,
+	},
+	.probe = msm8226_pinctrl_probe,
+	.remove = msm_pinctrl_remove,
+};
+
+static int __init msm8226_pinctrl_init(void)
+{
+	return platform_driver_register(&msm8226_pinctrl_driver);
+}
+arch_initcall(msm8226_pinctrl_init);
+
+static void __exit msm8226_pinctrl_exit(void)
+{
+	platform_driver_unregister(&msm8226_pinctrl_driver);
+}
+module_exit(msm8226_pinctrl_exit);
+
+MODULE_AUTHOR("Bartosz Dudziak <bartosz.dudziak@snejp.pl>");
+MODULE_DESCRIPTION("Qualcomm MSM8226 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, msm8226_pinctrl_of_match);
+
-- 
2.25.1

Re: [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver

[Linus Walleij]

On Sat, Jun 27, 2020 at 9:34 PM Bartosz Dudziak
<bartosz.dudziak@snejp.pl> wrote:

> Binding and driver for the Qualcomm MSM8226 TLMM pinctrl block

This looks good to me, but I'm waiting for Bjorn to review it before applying.

Yours,
Linus Walleij