From: William Breathitt Gray <vilhelm.gray@gmail.com>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: Re: [PATCH] gpio: ws16c48: Use irqchip template
Date: Wed, 22 Jul 2020 13:18:20 -0400 [thread overview]
Message-ID: <20200722171820.GA93793@shinobu> (raw)
In-Reply-To: <20200722101938.151265-1-linus.walleij@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 3026 bytes --]
On Wed, Jul 22, 2020 at 12:19:38PM +0200, Linus Walleij wrote:
> This makes the driver use the irqchip template to assign
> properties to the gpio_irq_chip instead of using the
> explicit call to gpiochip_irqchip_add().
>
> The irqchip is instead added while adding the gpiochip.
> Also move the IRQ initialization to the special .init_hw()
> callback.
>
> Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
> ---
> drivers/gpio/gpio-ws16c48.c | 39 ++++++++++++++++++++++++-------------
> 1 file changed, 25 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpio/gpio-ws16c48.c b/drivers/gpio/gpio-ws16c48.c
> index cb510df2b014..2d89d0529135 100644
> --- a/drivers/gpio/gpio-ws16c48.c
> +++ b/drivers/gpio/gpio-ws16c48.c
> @@ -365,10 +365,25 @@ static const char *ws16c48_names[WS16C48_NGPIO] = {
> "Port 5 Bit 4", "Port 5 Bit 5", "Port 5 Bit 6", "Port 5 Bit 7"
> };
>
> +static int ws16c48_irq_init_hw(struct gpio_chip *gc)
> +{
> + struct ws16c48_gpio *const ws16c48gpio = gpiochip_get_data(gc);
> +
> + /* Disable IRQ by default */
> + outb(0x80, ws16c48gpio->base + 7);
> + outb(0, ws16c48gpio->base + 8);
> + outb(0, ws16c48gpio->base + 9);
> + outb(0, ws16c48gpio->base + 10);
> + outb(0xC0, ws16c48gpio->base + 7);
> +
> + return 0;
> +}
> +
> static int ws16c48_probe(struct device *dev, unsigned int id)
> {
> struct ws16c48_gpio *ws16c48gpio;
> const char *const name = dev_name(dev);
> + struct gpio_irq_chip *girq;
> int err;
>
> ws16c48gpio = devm_kzalloc(dev, sizeof(*ws16c48gpio), GFP_KERNEL);
> @@ -396,6 +411,16 @@ static int ws16c48_probe(struct device *dev, unsigned int id)
> ws16c48gpio->chip.set_multiple = ws16c48_gpio_set_multiple;
> ws16c48gpio->base = base[id];
>
> + girq = &ws16c48gpio->chip.irq;
> + girq->chip = &ws16c48_irqchip;
> + /* This will let us handle the parent IRQ in the driver */
> + girq->parent_handler = NULL;
> + girq->num_parents = 0;
> + girq->parents = NULL;
> + girq->default_type = IRQ_TYPE_NONE;
> + girq->handler = handle_edge_irq;
> + girq->init_hw = ws16c48_irq_init_hw;
> +
> raw_spin_lock_init(&ws16c48gpio->lock);
>
> err = devm_gpiochip_add_data(dev, &ws16c48gpio->chip, ws16c48gpio);
> @@ -404,20 +429,6 @@ static int ws16c48_probe(struct device *dev, unsigned int id)
> return err;
> }
>
> - /* Disable IRQ by default */
> - outb(0x80, base[id] + 7);
> - outb(0, base[id] + 8);
> - outb(0, base[id] + 9);
> - outb(0, base[id] + 10);
> - outb(0xC0, base[id] + 7);
> -
> - err = gpiochip_irqchip_add(&ws16c48gpio->chip, &ws16c48_irqchip, 0,
> - handle_edge_irq, IRQ_TYPE_NONE);
> - if (err) {
> - dev_err(dev, "Could not add irqchip (%d)\n", err);
> - return err;
> - }
> -
> err = devm_request_irq(dev, irq[id], ws16c48_irq_handler, IRQF_SHARED,
> name, ws16c48gpio);
> if (err) {
> --
> 2.26.2
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2020-07-22 17:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-22 10:19 [PATCH] gpio: ws16c48: Use irqchip template Linus Walleij
2020-07-22 17:18 ` William Breathitt Gray [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200722171820.GA93793@shinobu \
--to=vilhelm.gray@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).