On Wed, Jul 22, 2020 at 01:06:49PM +0200, Linus Walleij wrote:
> This makes the driver use the irqchip template to assign
> properties to the gpio_irq_chip instead of using the
> explicit call to gpiochip_irqchip_add().
> 
> The irqchip is instead added while adding the gpiochip.
> Also move the IRQ initialization to the special .init_hw()
> callback.
> 
> Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>

> ---
>  drivers/gpio/gpio-pci-idio-16.c | 33 ++++++++++++++++++++++-----------
>  1 file changed, 22 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-pci-idio-16.c b/drivers/gpio/gpio-pci-idio-16.c
> index 638d6656ce73..9acec76e0b51 100644
> --- a/drivers/gpio/gpio-pci-idio-16.c
> +++ b/drivers/gpio/gpio-pci-idio-16.c
> @@ -280,6 +280,17 @@ static const char *idio_16_names[IDIO_16_NGPIO] = {
>  	"IIN8", "IIN9", "IIN10", "IIN11", "IIN12", "IIN13", "IIN14", "IIN15"
>  };
>  
> +static int idio_16_irq_init_hw(struct gpio_chip *gc)
> +{
> +	struct idio_16_gpio *const idio16gpio = gpiochip_get_data(gc);
> +
> +	/* Disable IRQ by default and clear any pending interrupt */
> +	iowrite8(0, &idio16gpio->reg->irq_ctl);
> +	iowrite8(0, &idio16gpio->reg->in0_7);
> +
> +	return 0;
> +}
> +
>  static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  {
>  	struct device *const dev = &pdev->dev;
> @@ -287,6 +298,7 @@ static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	int err;
>  	const size_t pci_bar_index = 2;
>  	const char *const name = pci_name(pdev);
> +	struct gpio_irq_chip *girq;
>  
>  	idio16gpio = devm_kzalloc(dev, sizeof(*idio16gpio), GFP_KERNEL);
>  	if (!idio16gpio)
> @@ -323,6 +335,16 @@ static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  	idio16gpio->chip.set = idio_16_gpio_set;
>  	idio16gpio->chip.set_multiple = idio_16_gpio_set_multiple;
>  
> +	girq = &idio16gpio->chip.irq;
> +	girq->chip = &idio_16_irqchip;
> +	/* This will let us handle the parent IRQ in the driver */
> +	girq->parent_handler = NULL;
> +	girq->num_parents = 0;
> +	girq->parents = NULL;
> +	girq->default_type = IRQ_TYPE_NONE;
> +	girq->handler = handle_edge_irq;
> +	girq->init_hw = idio_16_irq_init_hw;
> +
>  	raw_spin_lock_init(&idio16gpio->lock);
>  
>  	err = devm_gpiochip_add_data(dev, &idio16gpio->chip, idio16gpio);
> @@ -331,17 +353,6 @@ static int idio_16_probe(struct pci_dev *pdev, const struct pci_device_id *id)
>  		return err;
>  	}
>  
> -	/* Disable IRQ by default and clear any pending interrupt */
> -	iowrite8(0, &idio16gpio->reg->irq_ctl);
> -	iowrite8(0, &idio16gpio->reg->in0_7);
> -
> -	err = gpiochip_irqchip_add(&idio16gpio->chip, &idio_16_irqchip, 0,
> -		handle_edge_irq, IRQ_TYPE_NONE);
> -	if (err) {
> -		dev_err(dev, "Could not add irqchip (%d)\n", err);
> -		return err;
> -	}
> -
>  	err = devm_request_irq(dev, pdev->irq, idio_16_irq_handler, IRQF_SHARED,
>  		name, idio16gpio);
>  	if (err) {
> -- 
> 2.26.2
>