Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 00/18] gpio: cdev: add uAPI V2
@ 2020-07-25  4:19 Kent Gibson
  2020-07-25  4:19 ` [PATCH v2 01/18] gpio: uapi: define GPIO_MAX_NAME_SIZE for array sizes Kent Gibson
                   ` (17 more replies)
  0 siblings, 18 replies; 46+ messages in thread
From: Kent Gibson @ 2020-07-25  4:19 UTC (permalink / raw)
  To: linux-kernel, linux-gpio, bgolaszewski, linus.walleij; +Cc: Kent Gibson

This patchset defines and implements adds a new version of the
GPIO CDEV uAPI to address existing 32/64-bit alignment issues, add
support for debounce, event sequence numbers, and allowing for requested
lines with different configurations.
It provides some future proofing by adding optional configuration fields
and padding reserved for future use.

The series can be partitioned into two sets; the first eleven
contain the V2 uAPI implementation, and the final seven port
the GPIO tools to the V2 uAPI and extend them to use new uAPI features.

The more complicated patches include their own commentary where
appropriate.

Cheers,
Kent.

Changes since v1:
 - split out cleanup patches into a separate series.
 - split implementation patch into a patch for each ioctl or major feature.
 - split tool port patch into a patch per tool.
 - rework uAPI to allow requested lines with different configurations.

Kent Gibson (18):
  gpio: uapi: define GPIO_MAX_NAME_SIZE for array sizes
  gpio: uapi: define uAPI v2
  gpiolib: make cdev a build option
  gpiolib: add build option for CDEV v1 ABI
  gpiolib: cdev: support GPIO_GET_LINE_IOCTL and
    GPIOLINE_GET_VALUES_IOCTL
  gpiolib: cdev: support GPIO_GET_LINEINFO_V2_IOCTL and
    GPIO_GET_LINEINFO_WATCH_V2_IOCTL
  gpiolib: cdev: support edge detection for uAPI v2
  gpiolib: cdev: support GPIOLINE_SET_CONFIG_IOCTL
  gpiolib: cdev: support GPIOLINE_SET_VALUES_IOCTL
  gpiolib: cdev: support setting debounce
  gpio: uapi: document uAPI v1 as deprecated
  tools: gpio: port lsgpio to v2 uAPI
  tools: gpio: port gpio-watch to v2 uAPI
  tools: gpio: rename nlines to num_lines
  tools: gpio: port gpio-hammer to v2 uAPI
  tools: gpio: port gpio-event-mon to v2 uAPI
  tools: gpio: add debounce support to gpio-event-mon
  tools: gpio: add multi-line monitoring to gpio-event-mon

 drivers/gpio/Kconfig        |   28 +-
 drivers/gpio/Makefile       |    2 +-
 drivers/gpio/gpiolib-cdev.c | 1296 ++++++++++++++++++++++++++++++++++-
 drivers/gpio/gpiolib-cdev.h |   15 +
 drivers/gpio/gpiolib.c      |    2 +
 drivers/gpio/gpiolib.h      |    6 +
 include/uapi/linux/gpio.h   |  327 ++++++++-
 tools/gpio/gpio-event-mon.c |  137 ++--
 tools/gpio/gpio-hammer.c    |   27 +-
 tools/gpio/gpio-utils.c     |  117 ++--
 tools/gpio/gpio-utils.h     |   48 +-
 tools/gpio/gpio-watch.c     |   10 +-
 tools/gpio/lsgpio.c         |  102 ++-
 13 files changed, 1882 insertions(+), 235 deletions(-)


base-commit: 8fc3ed3a474d76cd76dd0a154ea904373e9a5530
-- 
2.27.0


^ permalink raw reply	[flat|nested] 46+ messages in thread

end of thread, back to index

Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-25  4:19 [PATCH v2 00/18] gpio: cdev: add uAPI V2 Kent Gibson
2020-07-25  4:19 ` [PATCH v2 01/18] gpio: uapi: define GPIO_MAX_NAME_SIZE for array sizes Kent Gibson
2020-07-25  4:19 ` [PATCH v2 02/18] gpio: uapi: define uAPI v2 Kent Gibson
2020-08-04 17:42   ` Bartosz Golaszewski
2020-08-05  5:18     ` Kent Gibson
2020-08-05 17:47       ` Bartosz Golaszewski
2020-08-06  1:03         ` Kent Gibson
2020-08-06  1:15       ` Kent Gibson
2020-08-06 15:53         ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 03/18] gpiolib: make cdev a build option Kent Gibson
2020-07-25 20:29   ` Andy Shevchenko
2020-07-26 22:25   ` Linus Walleij
2020-07-27  1:46     ` Kent Gibson
2020-07-27  5:57       ` Kent Gibson
2020-07-27  8:15         ` Linus Walleij
2020-07-25  4:19 ` [PATCH v2 04/18] gpiolib: add build option for CDEV v1 ABI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 05/18] gpiolib: cdev: support GPIO_GET_LINE_IOCTL and GPIOLINE_GET_VALUES_IOCTL Kent Gibson
2020-07-25 20:51   ` Andy Shevchenko
2020-07-26  1:12     ` Kent Gibson
2020-07-26  3:24       ` Kent Gibson
2020-07-29  2:28       ` Kent Gibson
2020-07-29  8:05         ` Andy Shevchenko
2020-07-29 10:01           ` Kent Gibson
2020-07-31 16:05       ` Bartosz Golaszewski
2020-08-02  3:31         ` Kent Gibson
2020-08-02  9:32           ` Kent Gibson
2020-08-03 19:59             ` Bartosz Golaszewski
2020-08-03 20:02           ` Bartosz Golaszewski
2020-08-03 23:01             ` Kent Gibson
2020-08-04 17:47               ` Bartosz Golaszewski
2020-08-05  3:06                 ` Kent Gibson
2020-07-25  4:19 ` [PATCH v2 06/18] gpiolib: cdev: support GPIO_GET_LINEINFO_V2_IOCTL and GPIO_GET_LINEINFO_WATCH_V2_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 07/18] gpiolib: cdev: support edge detection for uAPI v2 Kent Gibson
2020-08-04 19:28   ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 08/18] gpiolib: cdev: support GPIOLINE_SET_CONFIG_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 09/18] gpiolib: cdev: support GPIOLINE_SET_VALUES_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 10/18] gpiolib: cdev: support setting debounce Kent Gibson
2020-07-25  4:19 ` [PATCH v2 11/18] gpio: uapi: document uAPI v1 as deprecated Kent Gibson
2020-08-04 19:43   ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 12/18] tools: gpio: port lsgpio to v2 uAPI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 13/18] tools: gpio: port gpio-watch " Kent Gibson
2020-07-25  4:19 ` [PATCH v2 14/18] tools: gpio: rename nlines to num_lines Kent Gibson
2020-07-25  4:19 ` [PATCH v2 15/18] tools: gpio: port gpio-hammer to v2 uAPI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 16/18] tools: gpio: port gpio-event-mon " Kent Gibson
2020-07-25  4:19 ` [PATCH v2 17/18] tools: gpio: add debounce support to gpio-event-mon Kent Gibson
2020-07-25  4:19 ` [PATCH v2 18/18] tools: gpio: add multi-line monitoring " Kent Gibson

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git