Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Kent Gibson <warthog618@gmail.com>
To: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
	bgolaszewski@baylibre.com, linus.walleij@linaro.org
Cc: Kent Gibson <warthog618@gmail.com>
Subject: [PATCH v2 18/18] tools: gpio: add multi-line monitoring to gpio-event-mon
Date: Sat, 25 Jul 2020 12:19:55 +0800
Message-ID: <20200725041955.9985-19-warthog618@gmail.com> (raw)
In-Reply-To: <20200725041955.9985-1-warthog618@gmail.com>

Extend gpio-event-mon to support monitoring multiple lines.
This would require multiple lineevent requests to implement using uAPI v1,
but can be performed with a single line request using uAPI v2.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 tools/gpio/gpio-event-mon.c | 41 ++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 10 deletions(-)

diff --git a/tools/gpio/gpio-event-mon.c b/tools/gpio/gpio-event-mon.c
index b64427d78942..e22cbf631e49 100644
--- a/tools/gpio/gpio-event-mon.c
+++ b/tools/gpio/gpio-event-mon.c
@@ -26,7 +26,8 @@
 #include "gpio-utils.h"
 
 int monitor_device(const char *device_name,
-		   unsigned int line,
+		   unsigned int *lines,
+		   unsigned int num_lines,
 		   struct gpioline_config *config,
 		   unsigned int loops)
 {
@@ -47,7 +48,7 @@ int monitor_device(const char *device_name,
 		goto exit_free_name;
 	}
 
-	ret = gpiotools_request_line(device_name, &line, 1, config,
+	ret = gpiotools_request_line(device_name, lines, num_lines, config,
 				     "gpio-event-mon");
 	if (ret < 0)
 		goto exit_device_close;
@@ -63,9 +64,23 @@ int monitor_device(const char *device_name,
 		goto exit_line_close;
 	}
 
-	fprintf(stdout, "Monitoring line %d on %s\n", line, device_name);
-	fprintf(stdout, "Initial line value: %d\n",
-		gpiotools_test_bit(values.bits, 0));
+	if (num_lines == 1) {
+		fprintf(stdout, "Monitoring line %d on %s\n", lines[0], device_name);
+		fprintf(stdout, "Initial line value: %d\n",
+			gpiotools_test_bit(values.bits, 0));
+	} else {
+		fprintf(stdout, "Monitoring lines %d", lines[0]);
+		for (i = 1; i < num_lines - 1; i++)
+			fprintf(stdout, ", %d", lines[i]);
+		fprintf(stdout, " and %d on %s\n", lines[i], device_name);
+		fprintf(stdout, "Initial line values: %d",
+			gpiotools_test_bit(values.bits, 0));
+		for (i = 1; i < num_lines - 1; i++)
+			fprintf(stdout, ", %d",
+				gpiotools_test_bit(values.bits, i));
+		fprintf(stdout, " and %d\n",
+			gpiotools_test_bit(values.bits, i));
+	}
 
 	while (1) {
 		struct gpioline_event event;
@@ -124,7 +139,7 @@ void print_usage(void)
 	fprintf(stderr, "Usage: gpio-event-mon [options]...\n"
 		"Listen to events on GPIO lines, 0->1 1->0\n"
 		"  -n <name>  Listen on GPIOs on a named device (must be stated)\n"
-		"  -o <n>     Offset to monitor\n"
+		"  -o <n>     Offset of line to monitor (may be repeated)\n"
 		"  -d         Set line as open drain\n"
 		"  -s         Set line as open source\n"
 		"  -r         Listen for rising edges\n"
@@ -145,7 +160,8 @@ void print_usage(void)
 int main(int argc, char **argv)
 {
 	const char *device_name = NULL;
-	unsigned int line = -1;
+	unsigned int lines[GPIOLINES_MAX];
+	unsigned int num_lines = 0;
 	unsigned int loops = 0;
 	struct gpioline_config config;
 	int c, attr;
@@ -161,7 +177,12 @@ int main(int argc, char **argv)
 			device_name = optarg;
 			break;
 		case 'o':
-			line = strtoul(optarg, NULL, 10);
+			if (num_lines >= GPIOLINES_MAX) {
+				print_usage();
+				return -1;
+			}
+			lines[num_lines] = strtoul(optarg, NULL, 10);
+			num_lines++;
 			break;
 		case 'b':
 			attr = config.num_attrs;
@@ -189,7 +210,7 @@ int main(int argc, char **argv)
 		}
 	}
 
-	if (!device_name || line == -1) {
+	if (!device_name || num_lines == 0) {
 		print_usage();
 		return -1;
 	}
@@ -198,5 +219,5 @@ int main(int argc, char **argv)
 		       "falling edges\n");
 		config.flags |= EDGE_FLAGS;
 	}
-	return monitor_device(device_name, line, &config, loops);
+	return monitor_device(device_name, lines, num_lines, &config, loops);
 }
-- 
2.27.0


      parent reply index

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-25  4:19 [PATCH v2 00/18] gpio: cdev: add uAPI V2 Kent Gibson
2020-07-25  4:19 ` [PATCH v2 01/18] gpio: uapi: define GPIO_MAX_NAME_SIZE for array sizes Kent Gibson
2020-07-25  4:19 ` [PATCH v2 02/18] gpio: uapi: define uAPI v2 Kent Gibson
2020-08-04 17:42   ` Bartosz Golaszewski
2020-08-05  5:18     ` Kent Gibson
2020-08-05 17:47       ` Bartosz Golaszewski
2020-08-06  1:03         ` Kent Gibson
2020-08-06  1:15       ` Kent Gibson
2020-08-06 15:53         ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 03/18] gpiolib: make cdev a build option Kent Gibson
2020-07-25 20:29   ` Andy Shevchenko
2020-07-26 22:25   ` Linus Walleij
2020-07-27  1:46     ` Kent Gibson
2020-07-27  5:57       ` Kent Gibson
2020-07-27  8:15         ` Linus Walleij
2020-07-25  4:19 ` [PATCH v2 04/18] gpiolib: add build option for CDEV v1 ABI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 05/18] gpiolib: cdev: support GPIO_GET_LINE_IOCTL and GPIOLINE_GET_VALUES_IOCTL Kent Gibson
2020-07-25 20:51   ` Andy Shevchenko
2020-07-26  1:12     ` Kent Gibson
2020-07-26  3:24       ` Kent Gibson
2020-07-29  2:28       ` Kent Gibson
2020-07-29  8:05         ` Andy Shevchenko
2020-07-29 10:01           ` Kent Gibson
2020-07-31 16:05       ` Bartosz Golaszewski
2020-08-02  3:31         ` Kent Gibson
2020-08-02  9:32           ` Kent Gibson
2020-08-03 19:59             ` Bartosz Golaszewski
2020-08-03 20:02           ` Bartosz Golaszewski
2020-08-03 23:01             ` Kent Gibson
2020-08-04 17:47               ` Bartosz Golaszewski
2020-08-05  3:06                 ` Kent Gibson
2020-07-25  4:19 ` [PATCH v2 06/18] gpiolib: cdev: support GPIO_GET_LINEINFO_V2_IOCTL and GPIO_GET_LINEINFO_WATCH_V2_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 07/18] gpiolib: cdev: support edge detection for uAPI v2 Kent Gibson
2020-08-04 19:28   ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 08/18] gpiolib: cdev: support GPIOLINE_SET_CONFIG_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 09/18] gpiolib: cdev: support GPIOLINE_SET_VALUES_IOCTL Kent Gibson
2020-07-25  4:19 ` [PATCH v2 10/18] gpiolib: cdev: support setting debounce Kent Gibson
2020-07-25  4:19 ` [PATCH v2 11/18] gpio: uapi: document uAPI v1 as deprecated Kent Gibson
2020-08-04 19:43   ` Bartosz Golaszewski
2020-07-25  4:19 ` [PATCH v2 12/18] tools: gpio: port lsgpio to v2 uAPI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 13/18] tools: gpio: port gpio-watch " Kent Gibson
2020-07-25  4:19 ` [PATCH v2 14/18] tools: gpio: rename nlines to num_lines Kent Gibson
2020-07-25  4:19 ` [PATCH v2 15/18] tools: gpio: port gpio-hammer to v2 uAPI Kent Gibson
2020-07-25  4:19 ` [PATCH v2 16/18] tools: gpio: port gpio-event-mon " Kent Gibson
2020-07-25  4:19 ` [PATCH v2 17/18] tools: gpio: add debounce support to gpio-event-mon Kent Gibson
2020-07-25  4:19 ` Kent Gibson [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200725041955.9985-19-warthog618@gmail.com \
    --to=warthog618@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git