Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2] gpio: max732x: Use irqchip template
@ 2020-07-26 22:12 Linus Walleij
  2020-07-28 22:34 ` Sam Protsenko
  0 siblings, 1 reply; 2+ messages in thread
From: Linus Walleij @ 2020-07-26 22:12 UTC (permalink / raw)
  To: linux-gpio; +Cc: Bartosz Golaszewski, Linus Walleij, Sam Protsenko

This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.

Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Set up the IRQ template *before* registering the GPIO
  chip.
---
 drivers/gpio/gpio-max732x.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/gpio/gpio-max732x.c b/drivers/gpio/gpio-max732x.c
index 63472f308857..238cbe926b9f 100644
--- a/drivers/gpio/gpio-max732x.c
+++ b/drivers/gpio/gpio-max732x.c
@@ -503,6 +503,8 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 
 	if (((pdata && pdata->irq_base) || client->irq)
 			&& has_irq != INT_NONE) {
+		struct gpio_irq_chip *girq;
+
 		if (pdata)
 			irq_base = pdata->irq_base;
 		chip->irq_features = has_irq;
@@ -517,19 +519,17 @@ static int max732x_irq_setup(struct max732x_chip *chip,
 				client->irq);
 			return ret;
 		}
-		ret =  gpiochip_irqchip_add_nested(&chip->gpio_chip,
-						   &max732x_irq_chip,
-						   irq_base,
-						   handle_simple_irq,
-						   IRQ_TYPE_NONE);
-		if (ret) {
-			dev_err(&client->dev,
-				"could not connect irqchip to gpiochip\n");
-			return ret;
-		}
-		gpiochip_set_nested_irqchip(&chip->gpio_chip,
-					    &max732x_irq_chip,
-					    client->irq);
+
+		girq = &chip->gpio_chip.irq;
+		girq->chip = &max732x_irq_chip;
+		/* This will let us handle the parent IRQ in the driver */
+		girq->parent_handler = NULL;
+		girq->num_parents = 0;
+		girq->parents = NULL;
+		girq->default_type = IRQ_TYPE_NONE;
+		girq->handler = handle_simple_irq;
+		girq->threaded = true;
+		girq->first = irq_base; /* FIXME: get rid of this */
 	}
 
 	return 0;
@@ -695,11 +695,11 @@ static int max732x_probe(struct i2c_client *client,
 			return ret;
 	}
 
-	ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
+	ret = max732x_irq_setup(chip, id);
 	if (ret)
 		return ret;
 
-	ret = max732x_irq_setup(chip, id);
+	ret = devm_gpiochip_add_data(&client->dev, &chip->gpio_chip, chip);
 	if (ret)
 		return ret;
 
-- 
2.26.2


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-26 22:12 [PATCH v2] gpio: max732x: Use irqchip template Linus Walleij
2020-07-28 22:34 ` Sam Protsenko

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git