From: Nikita Shubin <nikita.shubin@maquefel.me>
To: unlisted-recipients:; (no To-header on input)
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
Nikita Shubin <nikita.shubin@maquefel.me>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 2/7] gpio: gpio-ep93xx: Fix single irqchip with multi gpiochips
Date: Fri, 5 Feb 2021 11:05:02 +0300 [thread overview]
Message-ID: <20210205080507.16007-3-nikita.shubin@maquefel.me> (raw)
In-Reply-To: <20210205080507.16007-1-nikita.shubin@maquefel.me>
Fixes the following warnings which results in interrupts disabled on
port B/F:
gpio gpiochip1: (B): detected irqchip that is shared with multiple gpiochips: please fix the driver.
gpio gpiochip5: (F): detected irqchip that is shared with multiple gpiochips: please fix the driver.
- added separate irqchip for each interrupt capable gpiochip
- provided unique names for each irqchip
Fixes: d2b091961510 ("gpio: ep93xx: Pass irqchip when adding gpiochip")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
---
drivers/gpio/gpio-ep93xx.c | 38 ++++++++++++++++++++++++++++----------
1 file changed, 28 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index e3b5e2c37259..3c9f7233e62d 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -38,6 +38,7 @@
#define EP93XX_GPIO_F_IRQ_BASE 80
struct ep93xx_gpio_irq_chip {
+ struct irq_chip ic;
u8 irq_offset;
u8 int_unmasked;
u8 int_enabled;
@@ -284,9 +285,11 @@ struct ep93xx_gpio_bank {
bool has_irq;
bool has_hierarchical_irq;
unsigned int irq_base;
+ const char *irq_name;
};
-#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base) \
+#define EP93XX_GPIO_BANK(_label, _data, _dir, _irq, _base, _has_irq, _has_hier, _irq_base, \
+_irq_name) \
{ \
.label = _label, \
.data = _data, \
@@ -296,20 +299,21 @@ struct ep93xx_gpio_bank {
.has_irq = _has_irq, \
.has_hierarchical_irq = _has_hier, \
.irq_base = _irq_base, \
+ .irq_name = _irq_name, \
}
static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
/* Bank A has 8 IRQs */
- EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64),
+ EP93XX_GPIO_BANK("A", 0x00, 0x10, 0x90, 0, true, false, 64, "gpio-irq-a"),
/* Bank B has 8 IRQs */
- EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72),
- EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0),
- EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0),
- EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0),
+ EP93XX_GPIO_BANK("B", 0x04, 0x14, 0xac, 8, true, false, 72, "gpio-irq-b"),
+ EP93XX_GPIO_BANK("C", 0x08, 0x18, 0x00, 40, false, false, 0, 0),
+ EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 0x00, 24, false, false, 0, 0),
+ EP93XX_GPIO_BANK("E", 0x20, 0x24, 0x00, 32, false, false, 0, 0),
/* Bank F has 8 IRQs */
- EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0),
- EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0),
- EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0),
+ EP93XX_GPIO_BANK("F", 0x30, 0x34, 0x4c, 16, false, true, 0, "gpio-irq-b"),
+ EP93XX_GPIO_BANK("G", 0x38, 0x3c, 0x00, 48, false, false, 0, 0),
+ EP93XX_GPIO_BANK("H", 0x40, 0x44, 0x00, 56, false, false, 0, 0),
};
static int ep93xx_gpio_set_config(struct gpio_chip *gc, unsigned offset,
@@ -331,6 +335,16 @@ static int ep93xx_gpio_f_to_irq(struct gpio_chip *gc, unsigned offset)
return EP93XX_GPIO_F_IRQ_BASE + offset;
}
+static void ep93xx_init_irq_chip(struct irq_chip *ic, const char *irq_name)
+{
+ ic->name = irq_name;
+ ic->irq_ack = ep93xx_gpio_irq_ack;
+ ic->irq_mask_ack = ep93xx_gpio_irq_mask_ack;
+ ic->irq_mask = ep93xx_gpio_irq_mask;
+ ic->irq_unmask = ep93xx_gpio_irq_unmask;
+ ic->irq_set_type = ep93xx_gpio_irq_type;
+}
+
static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
struct platform_device *pdev,
struct ep93xx_gpio *epg,
@@ -352,6 +366,8 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
girq = &gc->irq;
if (bank->has_irq || bank->has_hierarchical_irq) {
+ struct irq_chip *ic;
+
gc->set_config = ep93xx_gpio_set_config;
egc->eic = devm_kcalloc(dev, 1,
sizeof(*egc->eic),
@@ -359,7 +375,9 @@ static int ep93xx_gpio_add_bank(struct ep93xx_gpio_chip *egc,
if (!egc->eic)
return -ENOMEM;
egc->eic->irq_offset = bank->irq;
- girq->chip = &ep93xx_gpio_irq_chip;
+ ic = &egc->eic->ic;
+ ep93xx_init_irq_chip(ic, bank->irq_name);
+ girq->chip = ic;
}
if (bank->has_irq) {
--
2.26.2
next prev parent reply other threads:[~2021-02-05 8:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-05 8:05 [PATCH v4 0/7] gpio: ep93xx: fixes series patch Nikita Shubin
2021-02-05 8:05 ` [PATCH v4 1/7] gpio: gpio-ep93xx: fix BUG_ON port F usage Nikita Shubin
2021-02-05 9:34 ` Alexander Sverdlin
2021-02-05 8:05 ` Nikita Shubin [this message]
2021-02-05 8:37 ` [PATCH v4 2/7] gpio: gpio-ep93xx: Fix single irqchip with multi gpiochips Alexander Sverdlin
2021-02-05 8:05 ` [PATCH v4 3/7] gpio: gpio-ep93xx: Fix wrong irq numbers in port F Nikita Shubin
2021-02-05 8:05 ` [PATCH v4 4/7] gpio: ep93xx: drop to_irq binding Nikita Shubin
2021-02-05 8:05 ` [PATCH v4 5/7] gpio: ep93xx: Fix typo s/hierarchial/hierarchical Nikita Shubin
2021-02-05 8:05 ` [PATCH v4 6/7] gpio: ep93xx: refactor ep93xx_gpio_add_bank Nikita Shubin
2021-02-05 8:05 ` [PATCH v4 7/7] gpio: ep93xx: refactor base IRQ number Nikita Shubin
2021-02-05 10:34 ` [PATCH v4 0/7] gpio: ep93xx: fixes series patch Bartosz Golaszewski
2021-02-05 10:48 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210205080507.16007-3-nikita.shubin@maquefel.me \
--to=nikita.shubin@maquefel.me \
--cc=alexander.sverdlin@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).