linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andrew Jeffery <andrew@aj.id.au>
To: openipmi-developer@lists.sourceforge.net,
	openbmc@lists.ozlabs.org, minyard@acm.org
Cc: "Chia-Wei, Wang" <chiawei_wang@aspeedtech.com>,
	robh+dt@kernel.org, joel@jms.id.au, lee.jones@linaro.org,
	avifishman70@gmail.com, tmaimon77@gmail.com,
	tali.perry1@gmail.com, venture@google.com, yuenn@google.com,
	benjaminfair@google.com, linus.walleij@linaro.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, linux-gpio@vger.kernel.org
Subject: [PATCH 02/19] ARM: dts: Remove LPC BMC and Host partitions
Date: Sat, 20 Feb 2021 00:55:06 +1030	[thread overview]
Message-ID: <20210219142523.3464540-3-andrew@aj.id.au> (raw)
In-Reply-To: <20210219142523.3464540-1-andrew@aj.id.au>

From: "Chia-Wei, Wang" <chiawei_wang@aspeedtech.com>

The LPC controller has no concept of the BMC and the Host partitions.

A concrete instance is that the HICRB[5:4] are for the I/O port address
configurtaion of KCS channel 1/2. However, the KCS driver cannot access
HICRB for channel 1/2 initialization via syscon regmap interface due to
the parition boundary. (i.e. offset 80h)

In addition, for the HW design backward compatibility, a newly added HW
control bit could be located at any reserved one over the LPC addressing
space. Thereby, this patch removes the lpc-bmc and lpc-host child node
and thus the LPC partitioning.

Note that this change requires the synchronization between device tree
change and the driver change. To prevent the misuse of old devicetrees
with new drivers, or vice versa, the v2 compatible strings are adopted
for the LPC device as listed:

	"aspeed,ast2400-lpc-v2"
	"aspeed,ast2500-lpc-v2"
	"aspeed,ast2600-lpc-v2"

Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Tested-by: Andrew Jeffery <andrew@aj.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi |  68 +++++++----------
 arch/arm/boot/dts/aspeed-g5.dtsi | 119 +++++++++++++-----------------
 arch/arm/boot/dts/aspeed-g6.dtsi | 121 +++++++++++++------------------
 3 files changed, 130 insertions(+), 178 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b3dafbc8caca..ee22bc036440 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -343,58 +343,44 @@ vuart: serial@1e787000 {
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2400-lpc", "simple-mfd";
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2400-lpc-bmc";
-					reg = <0x0 0x80>;
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
-
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2400-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
-
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2400-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					status = "disabled";
+				};
 
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2400-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
 
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2400-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
 
-					ibt: ibt@c0  {
-						compatible = "aspeed,ast2400-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 5bc0de0f3365..10ca2100f69b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -434,90 +434,73 @@ vuart: serial@1e787000 {
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2500-lpc", "simple-mfd";
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
 
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
 
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					status = "disabled";
+				};
 
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2500-lpc-ctrl";
-						reg = <0x0 0x10>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
 
-					lpc_snoop: lpc-snoop@10 {
-						compatible = "aspeed,ast2500-lpc-snoop";
-						reg = <0x10 0x8>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					status = "disabled";
+				};
 
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2500-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
 
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2500-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
 
 
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2500-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <8>;
-						status = "disabled";
-					};
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					status = "disabled";
 				};
 			};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 810b0676ab03..d91f48c3db62 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -460,90 +460,73 @@ wdt4: watchdog@1e7850c0 {
 			};
 
 			lpc: lpc@1e789000 {
-				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges = <0x0 0x1e789000 0x1000>;
 
-				lpc_bmc: lpc-bmc@0 {
-					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
-					reg = <0x0 0x80>;
-					reg-io-width = <4>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x0 0x80>;
-
-					kcs1: kcs@24 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
-						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <1>;
-						status = "disabled";
-					};
-					kcs2: kcs@28 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
-						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
-					kcs3: kcs@2c {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
-						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					kcs_chan = <1>;
+					status = "disabled";
 				};
 
-				lpc_host: lpc-host@80 {
-					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
-					reg = <0x80 0x1e0>;
-					reg-io-width = <4>;
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
 
-					#address-cells = <1>;
-					#size-cells = <1>;
-					ranges = <0x0 0x80 0x1e0>;
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
 
-					kcs4: kcs@94 {
-						compatible = "aspeed,ast2500-kcs-bmc-v2";
-						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
-						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
 
-					lpc_ctrl: lpc-ctrl@0 {
-						compatible = "aspeed,ast2600-lpc-ctrl";
-						reg = <0x0 0x80>;
-						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-						status = "disabled";
-					};
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
 
-					lpc_snoop: lpc-snoop@0 {
-						compatible = "aspeed,ast2600-lpc-snoop";
-						reg = <0x0 0x80>;
-						interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
+				};
 
-					lhc: lhc@20 {
-						compatible = "aspeed,ast2600-lhc";
-						reg = <0x20 0x24 0x48 0x8>;
-					};
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
 
-					lpc_reset: reset-controller@18 {
-						compatible = "aspeed,ast2600-lpc-reset";
-						reg = <0x18 0x4>;
-						#reset-cells = <1>;
-					};
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
 
-					ibt: ibt@c0 {
-						compatible = "aspeed,ast2600-ibt-bmc";
-						reg = <0xc0 0x18>;
-						interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-						status = "disabled";
-					};
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					status = "disabled";
 				};
 			};
 
-- 
2.27.0


  parent reply	other threads:[~2021-02-19 14:27 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-19 14:25 [PATCH 00/19] ipmi: Allow raw access to KCS devices Andrew Jeffery
2021-02-19 14:25 ` [PATCH 01/19] dt-bindings: aspeed-lpc: Remove LPC partitioning Andrew Jeffery
2021-02-22  9:04   ` Lee Jones
2021-02-19 14:25 ` Andrew Jeffery [this message]
2021-02-19 14:25 ` [PATCH 03/19] ipmi: kcs: aspeed: Adapt to new LPC DTS layout Andrew Jeffery
2021-02-19 14:25 ` [PATCH 04/19] pinctrl: aspeed-g5: Adapt to new LPC device tree layout Andrew Jeffery
2021-02-19 14:25 ` [PATCH 05/19] soc: aspeed: " Andrew Jeffery
2021-02-19 14:25 ` [PATCH 06/19] ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties Andrew Jeffery
2021-02-19 14:25 ` [PATCH 07/19] ipmi: kcs_bmc: Make status update atomic Andrew Jeffery
2021-02-19 14:25 ` [PATCH 08/19] ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions Andrew Jeffery
2021-02-19 14:25 ` [PATCH 09/19] ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi Andrew Jeffery
2021-02-19 14:25 ` [PATCH 10/19] ipmi: kcs_bmc: Turn the driver data-structures inside-out Andrew Jeffery
2021-02-19 14:25 ` [PATCH 11/19] ipmi: kcs_bmc: Split headers into device and client Andrew Jeffery
2021-02-19 14:25 ` [PATCH 12/19] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc Andrew Jeffery
2021-02-19 14:25 ` [PATCH 13/19] ipmi: kcs_bmc: Decouple the IPMI chardev from the core Andrew Jeffery
2021-02-19 14:25 ` [PATCH 14/19] ipmi: kcs_bmc: Allow clients to control KCS IRQ state Andrew Jeffery
2021-02-19 14:25 ` [PATCH 15/19] ipmi: kcs_bmc: Add a "raw" character device interface Andrew Jeffery
2021-02-19 14:25 ` [PATCH 16/19] dt-bindings: ipmi: Convert ASPEED KCS binding to schema Andrew Jeffery
2021-03-05 23:07   ` Rob Herring
2021-03-09  2:45     ` Andrew Jeffery
2021-02-19 14:25 ` [PATCH 17/19] dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices Andrew Jeffery
2021-03-05 23:09   ` Rob Herring
2021-03-09  2:44     ` Andrew Jeffery
2021-02-19 14:25 ` [PATCH 18/19] ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration Andrew Jeffery
2021-02-19 14:25 ` [PATCH 19/19] ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet Andrew Jeffery

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210219142523.3464540-3-andrew@aj.id.au \
    --to=andrew@aj.id.au \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=chiawei_wang@aspeedtech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=minyard@acm.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=openipmi-developer@lists.sourceforge.net \
    --cc=robh+dt@kernel.org \
    --cc=tali.perry1@gmail.com \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).