linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Natikar Basavaraj <Basavaraj.Natikar@amd.com>,
	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Mario Limonciello <mario.limonciello@amd.com>,
	<linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] pinctrl: amd: Adjust debugfs output
Date: Tue, 28 Mar 2023 12:42:30 -0500	[thread overview]
Message-ID: <20230328174231.8924-2-mario.limonciello@amd.com> (raw)
In-Reply-To: <20230328174231.8924-1-mario.limonciello@amd.com>

More fields are to be added, so to keep the display from being
too busy, adjust it.

1) Add a header to all columns
2) Except for interrupt, when fields have no data show empty
3) Remove otherwise blank whitespace

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
 drivers/pinctrl/pinctrl-amd.c | 76 ++++++++++++++---------------------
 1 file changed, 30 insertions(+), 46 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 9236a132c7ba..822f29440f15 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -206,15 +206,12 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 
 	char *level_trig;
 	char *active_level;
-	char *interrupt_enable;
 	char *interrupt_mask;
 	char *wake_cntrl0;
 	char *wake_cntrl1;
 	char *wake_cntrl2;
 	char *pin_sts;
 	char *pull_up_sel;
-	char *pull_up_enable;
-	char *pull_down_enable;
 	char *orientation;
 	char debounce_value[40];
 	char *debounce_enable;
@@ -246,6 +243,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 			continue;
 		}
 		seq_printf(s, "GPIO bank%d\n", bank);
+		seq_puts(s, "gpio\tint|active|trigger|S0i3| S3|S4/S5| Z|wake|pull|  orient|       debounce|reg\n");
 		for (; i < pin_num; i++) {
 			seq_printf(s, "#%d\t", i);
 			raw_spin_lock_irqsave(&gpio_dev->lock, flags);
@@ -255,7 +253,6 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 			if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
 				u8 level = (pin_reg >> ACTIVE_LEVEL_OFF) &
 						ACTIVE_LEVEL_MASK;
-				interrupt_enable = "+";
 
 				if (level == ACTIVE_LEVEL_HIGH)
 					active_level = "↑";
@@ -272,65 +269,54 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 				else
 					level_trig = " edge";
 
-			} else {
-				interrupt_enable = "∅";
-				active_level = "∅";
-				level_trig = "    ∅";
-			}
+				if (pin_reg & BIT(INTERRUPT_MASK_OFF))
+					interrupt_mask = "😛";
+				else
+					interrupt_mask = "😷";
 
-			if (pin_reg & BIT(INTERRUPT_MASK_OFF))
-				interrupt_mask = "😛";
-			else
-				interrupt_mask = "😷";
-			seq_printf(s, "int %s (%s)| active-%s| %s-⚡| ",
-				   interrupt_enable,
+				seq_printf(s, "%s|     %s|  %s|",
 				   interrupt_mask,
 				   active_level,
 				   level_trig);
+			} else
+				seq_puts(s, "  ∅|      |       |");
 
 			if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
 				wake_cntrl0 = "⏰";
 			else
-				wake_cntrl0 = " ∅";
-			seq_printf(s, "S0i3 %s| ", wake_cntrl0);
+				wake_cntrl0 = "  ";
+			seq_printf(s, "  %s| ", wake_cntrl0);
 
 			if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
 				wake_cntrl1 = "⏰";
 			else
-				wake_cntrl1 = " ∅";
-			seq_printf(s, "S3 %s| ", wake_cntrl1);
+				wake_cntrl1 = "  ";
+			seq_printf(s, "%s|", wake_cntrl1);
 
 			if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
 				wake_cntrl2 = "⏰";
 			else
-				wake_cntrl2 = " ∅";
-			seq_printf(s, "S4/S5 %s| ", wake_cntrl2);
+				wake_cntrl2 = "  ";
+			seq_printf(s, "   %s|", wake_cntrl2);
 
 			if (pin_reg & BIT(WAKECNTRL_Z_OFF))
 				wake_cntrlz = "⏰";
 			else
-				wake_cntrlz = " ∅";
-			seq_printf(s, "Z %s| ", wake_cntrlz);
+				wake_cntrlz = "  ";
+			seq_printf(s, "%s|", wake_cntrlz);
 
 			if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) {
-				pull_up_enable = "+";
 				if (pin_reg & BIT(PULL_UP_SEL_OFF))
 					pull_up_sel = "8k";
 				else
 					pull_up_sel = "4k";
-			} else {
-				pull_up_enable = "∅";
-				pull_up_sel = "  ";
+				seq_printf(s, "%s ↑|",
+					   pull_up_sel);
+			} else if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF)) {
+				seq_puts(s, "   ↓|");
+			} else  {
+				seq_puts(s, "    |");
 			}
-			seq_printf(s, "pull-↑ %s (%s)| ",
-				   pull_up_enable,
-				   pull_up_sel);
-
-			if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF))
-				pull_down_enable = "+";
-			else
-				pull_down_enable = "∅";
-			seq_printf(s, "pull-↓ %s| ", pull_down_enable);
 
 			if (pin_reg & BIT(OUTPUT_ENABLE_OFF)) {
 				pin_sts = "output";
@@ -345,7 +331,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 				else
 					orientation = "↓";
 			}
-			seq_printf(s, "%s %s| ", pin_sts, orientation);
+			seq_printf(s, "%s %s|", pin_sts, orientation);
 
 			db_cntrl = (DB_CNTRl_MASK << DB_CNTRL_OFF) & pin_reg;
 			if (db_cntrl) {
@@ -364,19 +350,17 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
 						unit = 61;
 				}
 				if ((DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF) == db_cntrl)
-					debounce_enable = "b +";
+					debounce_enable = "b";
 				else if ((DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF) == db_cntrl)
-					debounce_enable = "↓ +";
+					debounce_enable = "↓";
 				else
-					debounce_enable = "↑ +";
-
+					debounce_enable = "↑";
+				snprintf(debounce_value, sizeof(debounce_value), "%06u", time * unit);
+				seq_printf(s, "%s (🕑 %sus)|", debounce_enable, debounce_value);
 			} else {
-				debounce_enable = "  ∅";
-				time = 0;
+				seq_puts(s, "               |");
 			}
-			snprintf(debounce_value, sizeof(debounce_value), "%u", time * unit);
-			seq_printf(s, "debounce %s (🕑 %sus)| ", debounce_enable, debounce_value);
-			seq_printf(s, " 0x%x\n", pin_reg);
+			seq_printf(s, "0x%x\n", pin_reg);
 		}
 	}
 }
-- 
2.34.1


  reply	other threads:[~2023-03-28 17:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-28 17:42 [PATCH 0/2] pinctrl-amd debugfs improvements Mario Limonciello
2023-03-28 17:42 ` Mario Limonciello [this message]
2023-03-31 12:24   ` [PATCH 1/2] pinctrl: amd: Adjust debugfs output Linus Walleij
2023-03-28 17:42 ` [PATCH 2/2] pinctrl: amd: Add fields for interrupt status and wake status Mario Limonciello

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230328174231.8924-2-mario.limonciello@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Basavaraj.Natikar@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).