Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Sowjanya Komatineni <skomatineni@nvidia.com>
Cc: thierry.reding@gmail.com, jonathanh@nvidia.com,
	tglx@linutronix.de, jason@lakedaemon.net, marc.zyngier@arm.com,
	linus.walleij@linaro.org, stefan@agner.ch, mark.rutland@arm.com,
	pdeschrijver@nvidia.com, pgaikwad@nvidia.com, sboyd@kernel.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	jckuo@nvidia.com, josephl@nvidia.com, talho@nvidia.com,
	linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
	mperttunen@nvidia.com, spatra@nvidia.com, robh+dt@kernel.org,
	devicetree@vger.kernel.org, rjw@rjwysocki.net,
	viresh.kumar@linaro.org, linux-pm@vger.kernel.org
Subject: Re: [PATCH v8 14/21] clk: tegra210: Add suspend and resume support
Date: Mon, 12 Aug 2019 23:28:15 +0300
Message-ID: <232688c1-d47b-771d-a768-07e722488fa8@gmail.com> (raw)
In-Reply-To: <cd685e84-c0de-6142-597e-f7c77604350e@nvidia.com>

12.08.2019 22:03, Sowjanya Komatineni пишет:
> 
> On 8/12/19 11:19 AM, Dmitry Osipenko wrote:
>> 12.08.2019 20:28, Sowjanya Komatineni пишет:
>>> On 8/12/19 9:25 AM, Dmitry Osipenko wrote:
>>>> 11.08.2019 22:15, Sowjanya Komatineni пишет:
>>>>> On 8/11/19 10:39 AM, Dmitry Osipenko wrote:
>>>>>> 09.08.2019 21:40, Sowjanya Komatineni пишет:
>>>>>>> On 8/9/19 11:18 AM, Dmitry Osipenko wrote:
>>>>>>>> 09.08.2019 19:19, Sowjanya Komatineni пишет:
>>>>>>>>> On 8/9/19 6:56 AM, Dmitry Osipenko wrote:
>>>>>>>>>> 09.08.2019 2:46, Sowjanya Komatineni пишет:
>>>>>>>>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>>>>>>>>
>>>>>>>>>>> All the CAR controller settings are lost on suspend when core
>>>>>>>>>>> power goes off.
>>>>>>>>>>>
>>>>>>>>>>> This patch has implementation for saving and restoring all PLLs
>>>>>>>>>>> and clocks context during system suspend and resume to have the
>>>>>>>>>>> clocks back to same state for normal operation.
>>>>>>>>>>>
>>>>>>>>>>> Clock driver suspend and resume are registered as syscore_ops as clocks
>>>>>>>>>>> restore need to happen before the other drivers resume to have all their
>>>>>>>>>>> clocks back to the same state as before suspend.
>>>>>>>>>>>
>>>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>>>>> ---
>>>>>>>>>>>      drivers/clk/tegra/clk-tegra210.c | 103 +++++++++++++++++++++++++++++++++++++--
>>>>>>>>>>>      drivers/clk/tegra/clk.c          |  64 ++++++++++++++++++++++++
>>>>>>>>>>>      drivers/clk/tegra/clk.h          |   3 ++
>>>>>>>>>>>      3 files changed, 166 insertions(+), 4 deletions(-)
>>>>>>>>>>>
>>>>>>>>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>>>> index 998bf60b219a..8dd6f4f4debb 100644
>>>>>>>>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>>>> @@ -9,13 +9,13 @@
>>>>>>>>>>>      #include <linux/clkdev.h>
>>>>>>>>>>>      #include <linux/of.h>
>>>>>>>>>>>      #include <linux/of_address.h>
>>>>>>>>>>> +#include <linux/syscore_ops.h>
>>>>>>>>>>>      #include <linux/delay.h>
>>>>>>>>>>>      #include <linux/export.h>
>>>>>>>>>>>      #include <linux/mutex.h>
>>>>>>>>>>>      #include <linux/clk/tegra.h>
>>>>>>>>>>>      #include <dt-bindings/clock/tegra210-car.h>
>>>>>>>>>>>      #include <dt-bindings/reset/tegra210-car.h>
>>>>>>>>>>> -#include <linux/iopoll.h>
>>>>>>>>>>>      #include <linux/sizes.h>
>>>>>>>>>>>      #include <soc/tegra/pmc.h>
>>>>>>>>>>>      @@ -220,11 +220,15 @@
>>>>>>>>>>>      #define CLK_M_DIVISOR_SHIFT 2
>>>>>>>>>>>      #define CLK_M_DIVISOR_MASK 0x3
>>>>>>>>>>>      +#define CLK_MASK_ARM    0x44
>>>>>>>>>>> +#define MISC_CLK_ENB    0x48
>>>>>>>>>>> +
>>>>>>>>>>>      #define RST_DFLL_DVCO 0x2f4
>>>>>>>>>>>      #define DVFS_DFLL_RESET_SHIFT 0
>>>>>>>>>>>        #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>>>>>>>>>      #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>>>>>>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>>>>>>>>>        #define LVL2_CLK_GATE_OVRA 0xf8
>>>>>>>>>>>      #define LVL2_CLK_GATE_OVRC 0x3a0
>>>>>>>>>>> @@ -2825,6 +2829,7 @@ static int tegra210_enable_pllu(void)
>>>>>>>>>>>          struct tegra_clk_pll_freq_table *fentry;
>>>>>>>>>>>          struct tegra_clk_pll pllu;
>>>>>>>>>>>          u32 reg;
>>>>>>>>>>> +    int ret;
>>>>>>>>>>>            for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
>>>>>>>>>>>              if (fentry->input_rate == pll_ref_freq)
>>>>>>>>>>> @@ -2853,9 +2858,14 @@ static int tegra210_enable_pllu(void)
>>>>>>>>>>>          reg |= PLL_ENABLE;
>>>>>>>>>>>          writel(reg, clk_base + PLLU_BASE);
>>>>>>>>>>>      -    readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>>>>>>>>> -                      reg & PLL_BASE_LOCK, 2, 1000);
>>>>>>>>>>> -    if (!(reg & PLL_BASE_LOCK)) {
>>>>>>>>>>> +    /*
>>>>>>>>>>> +     * During clocks resume, same PLLU init and enable sequence get
>>>>>>>>>>> +     * executed. So, readx_poll_timeout_atomic can't be used here as it
>>>>>>>>>>> +     * uses ktime_get() and timekeeping resume doesn't happen by that
>>>>>>>>>>> +     * time. So, using tegra210_wait_for_mask for PLL LOCK.
>>>>>>>>>>> +     */
>>>>>>>>>>> +    ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>>>>>>>>> +    if (ret) {
>>>>>>>>>>>              pr_err("Timed out waiting for PLL_U to lock\n");
>>>>>>>>>>>              return -ETIMEDOUT;
>>>>>>>>>>>          }
>>>>>>>>>>> @@ -3288,6 +3298,84 @@ static void tegra210_disable_cpu_clock(u32 cpu)
>>>>>>>>>>>      }
>>>>>>>>>>>        #ifdef CONFIG_PM_SLEEP
>>>>>>>>>>> +/*
>>>>>>>>>>> + * This array lists mask values for each peripheral clk bank
>>>>>>>>>>> + * to mask out reserved bits during the clocks state restore
>>>>>>>>>>> + * on SC7 resume to prevent accidental writes to these reserved
>>>>>>>>>>> + * bits.
>>>>>>>>>>> + */
>>>>>>>>>>> +static u32 periph_clk_rsvd_mask[TEGRA210_CAR_BANK_COUNT] = {
>>>>>>>>>> Should be more natural to have a "valid_mask" instead of "rsvd_mask".
>>>>>>>>>>
>>>>>>>>>> What's actually wrong with touching of the reserved bits? They must be NO-OP.. or the
>>>>>>>>>> reserved bits are actually some kind of "secret" bits? If those bits have some
>>>>>>>>>> use-case
>>>>>>>>>> outside of Silicon HW (like FPGA simulation), then this doesn't matter for upstream
>>>>>>>>>> and you
>>>>>>>>>> have to keep the workaround locally in the downstream kernel or whatever.
>>>>>>>>> Will rename as valid_mask.
>>>>>>>>>
>>>>>>>>> some bits in these registers are undefined and is not good to write to these bits as
>>>>>>>>> they
>>>>>>>>> can cause pslverr.
>>>>>>>> Okay, it should be explained in the comment.
>>>>>>>>
>>>>>>>> Is it possible to disable trapping of changing the undefined bits?
>>>>>>> No its internal to design
>>>>>> Okay.
>>>>>>
>>>>>> Also, what about to move the valid_mask into struct tegra_clk_periph_regs?
>>>>> No, we cannot move to tegra_clk_periph_regs as its in tegra/clk.c and is common for all
>>>>> tegra.
>>>>>
>>>>> Reserved bits are different on tegra chips so should come from Tegra chip specific clock
>>>>> driver like
>>>>>
>>>>> clk-tegra210 for Tegra210.
>>>> Could you please check whether the reserved bits are RAZ (read as zero)?
>>>>
>>>> [snip]
>>> yes all reserved bits of clk_enb register is 0. This should not be set to 1.
>>>
>>> As I will be changing to variable name to valid_mask instead of reserved mask, will also
>>> change values to valid mask so it can be used directly to write to clk_enb for enabling all
>>> peripherals clks.
>>>
>> It looks to me that the tegra_clk_periph_force_on() could be made local to the
>> clk-tegra210.c and then the raw clk_enb values could be written directly instead of having
>> the clk_enb[] array, probably that will be a bit cleaner
> 
> All CLK_OUT_ENB* registers are already defined in clk driver and also periph_regs includes
> all of these to use.
> 
> To write value to enable all clocks directly without array, it need total 7 individual
> register writes for Tegra210. Also when suspend/resume is implemented for other prior
> tegras, they need to do same in tegra clock driver.
> 
> Reason I had this in clock driver is, this can be used by all tegra clock drivers and just
> can pass valid clocks values.
> 
> But doing individual register write with direct hard code values in corresponding tegra
> clock driver is preferred still, will update so in next revision and will move all the
> CLK_OUT_ENB* register defines to tegra/clk.h
> 
> Currently RST_DEVICES & CLK_OUT_ENB are all in tegra/clk.c

Yes, it should be a bit more clear to share these defines. Also, please define the "valid"
bitmasks with something like TEGRA210_DEVICES_MASK_L.

  reply index

Thread overview: 75+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08 23:46 [PATCH v8 00/21] SC7 entry and exit support for Tegra210 Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 01/21] pinctrl: tegra: Fix write barrier placement in pmx_writel Sowjanya Komatineni
2019-08-09 11:38   ` Dmitry Osipenko
2019-08-12  9:20   ` Thierry Reding
2019-08-14  8:32   ` Linus Walleij
2019-08-08 23:46 ` [PATCH v8 02/21] pinctrl: tegra: Add write barrier after all pinctrl register writes Sowjanya Komatineni
2019-08-09 11:39   ` Dmitry Osipenko
2019-08-12  9:20   ` Thierry Reding
2019-08-14  8:33   ` Linus Walleij
2019-08-08 23:46 ` [PATCH v8 03/21] clk: tegra: divider: Save and restore divider rate Sowjanya Komatineni
2019-08-12  9:21   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 04/21] clk: tegra: pllout: Save and restore pllout context Sowjanya Komatineni
2019-08-11 18:04   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 05/21] clk: tegra: pll: Save and restore pll context Sowjanya Komatineni
2019-08-09 11:33   ` Dmitry Osipenko
2019-08-09 17:39     ` Sowjanya Komatineni
2019-08-09 17:50       ` Dmitry Osipenko
2019-08-09 18:50         ` Sowjanya Komatineni
2019-08-11 17:24           ` Dmitry Osipenko
2019-08-09 12:46   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 06/21] clk: tegra: Support for OSC context save and restore Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 07/21] clk: Add API to get index of the clock parent Sowjanya Komatineni
2019-08-09 11:49   ` Dmitry Osipenko
2019-08-12  9:47   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 08/21] clk: tegra: periph: Add restore_context support Sowjanya Komatineni
2019-08-09 11:55   ` Dmitry Osipenko
2019-08-09 12:20     ` Dmitry Osipenko
2019-08-09 16:55       ` Sowjanya Komatineni
2019-08-12  9:50   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 09/21] clk: tegra: clk-super: Fix to enable PLLP branches to CPU Sowjanya Komatineni
2019-08-09 12:11   ` Dmitry Osipenko
2019-08-12  9:53   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 10/21] clk: tegra: clk-super: Add restore-context support Sowjanya Komatineni
2019-08-09 12:17   ` Dmitry Osipenko
2019-08-09 17:08     ` Sowjanya Komatineni
2019-08-11 17:29       ` Dmitry Osipenko
2019-08-12  9:55   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 11/21] clk: tegra: clk-dfll: Add suspend and resume support Sowjanya Komatineni
2019-08-09 12:23   ` Dmitry Osipenko
2019-08-09 16:39     ` Sowjanya Komatineni
2019-08-09 18:00       ` Dmitry Osipenko
2019-08-09 18:33         ` Sowjanya Komatineni
2019-08-09 18:52           ` Dmitry Osipenko
2019-08-12 10:01   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 12/21] cpufreq: tegra124: " Sowjanya Komatineni
2019-08-12 10:07   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 13/21] clk: tegra210: Use fence_udelay during PLLU init Sowjanya Komatineni
2019-08-11 18:02   ` Dmitry Osipenko
2019-08-11 19:16     ` Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 14/21] clk: tegra210: Add suspend and resume support Sowjanya Komatineni
2019-08-09 13:56   ` Dmitry Osipenko
2019-08-09 16:19     ` Sowjanya Komatineni
2019-08-09 18:18       ` Dmitry Osipenko
     [not found]         ` <cbe94f84-a17b-7e1a-811d-89db571784e1@nvidia.com>
2019-08-11 17:39           ` Dmitry Osipenko
2019-08-11 19:15             ` Sowjanya Komatineni
2019-08-12 16:25               ` Dmitry Osipenko
2019-08-12 17:28                 ` Sowjanya Komatineni
2019-08-12 18:19                   ` Dmitry Osipenko
2019-08-12 19:03                     ` Sowjanya Komatineni
2019-08-12 20:28                       ` Dmitry Osipenko [this message]
2019-08-12 10:17   ` Thierry Reding
2019-08-08 23:46 ` [PATCH v8 15/21] soc/tegra: pmc: Allow to support more tegras wake Sowjanya Komatineni
2019-08-11 17:52   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 16/21] soc/tegra: pmc: Add pmc wake support for tegra210 Sowjanya Komatineni
2019-08-09 13:28   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 17/21] arm64: tegra: Enable wake from deep sleep on RTC alarm Sowjanya Komatineni
2019-08-08 23:46 ` [PATCH v8 18/21] soc/tegra: pmc: Configure core power request polarity Sowjanya Komatineni
2019-08-09 13:13   ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 19/21] soc/tegra: pmc: Configure deep sleep control settings Sowjanya Komatineni
2019-08-09 13:23   ` Dmitry Osipenko
2019-08-09 16:23     ` Sowjanya Komatineni
2019-08-09 17:24       ` Sowjanya Komatineni
2019-08-09 18:22         ` Dmitry Osipenko
2019-08-08 23:46 ` [PATCH v8 20/21] arm64: dts: tegra210-p2180: Jetson TX1 SC7 timings Sowjanya Komatineni
2019-08-08 23:47 ` [PATCH v8 21/21] arm64: dts: tegra210-p3450: Jetson Nano " Sowjanya Komatineni

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=232688c1-d47b-771d-a768-07e722488fa8@gmail.com \
    --to=digetx@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jason@lakedaemon.net \
    --cc=jckuo@nvidia.com \
    --cc=jonathanh@nvidia.com \
    --cc=josephl@nvidia.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mperttunen@nvidia.com \
    --cc=pdeschrijver@nvidia.com \
    --cc=pgaikwad@nvidia.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=skomatineni@nvidia.com \
    --cc=spatra@nvidia.com \
    --cc=stefan@agner.ch \
    --cc=talho@nvidia.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org linux-gpio@archiver.kernel.org
	public-inbox-index linux-gpio


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/ public-inbox