Linux-GPIO Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/2] Remove MT6779 UART3 clock support
@ 2020-07-22  3:09 Hanks Chen
  2020-07-22  3:09 ` [PATCH v2 1/2] dt-bindings: clock: remove " Hanks Chen
                   ` (2 more replies)
  0 siblings, 3 replies; 11+ messages in thread
From: Hanks Chen @ 2020-07-22  3:09 UTC (permalink / raw)
  To: Michael Turquette, Stephen Boyd, Matthias Brugger, Rob Herring
  Cc: YueHaibing, mtk01761, CC Hwang, linux-gpio, linux-arm-kernel,
	linux-mediatek, linux-kernel, wsd_upstream, Hanks Chen

remove the redundant clk interface of uart.
CLK_INFRA_UART3 is a dummy clk interface,
it has no effect on the operation of the read/write instruction.

Change since v2:
Commit "dt-bindings: clock: remove UART3 clock support"
-- remove Fixes tag
Commit "clk: mediatek: remove UART3 clock support"
-- remove Fixes tag

Hanks Chen (2):
  dt-bindings: clock: remove UART3 clock support
  clk: mediatek: remove UART3 clock support

 drivers/clk/mediatek/clk-mt6779.c      | 2 --
 include/dt-bindings/clock/mt6779-clk.h | 1 -
 2 files changed, 3 deletions(-)

-- 
2.18.0

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, back to index

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-22  3:09 [PATCH v2 0/2] Remove MT6779 UART3 clock support Hanks Chen
2020-07-22  3:09 ` [PATCH v2 1/2] dt-bindings: clock: remove " Hanks Chen
2020-07-22 15:22   ` Matthias Brugger
2020-07-22  3:09 ` [PATCH v2 2/2] clk: mediatek: " Hanks Chen
2020-07-22 15:22   ` Matthias Brugger
2020-07-22  8:43 ` [PATCH v2 0/2] Remove MT6779 " Matthias Brugger
2020-07-22 11:16   ` Hanks Chen
2020-07-22 15:21     ` Matthias Brugger
2020-07-30 13:04       ` Hanks Chen
2020-09-08  6:31         ` Hanks Chen
2020-09-25 12:43           ` Hanks Chen

Linux-GPIO Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-gpio/0 linux-gpio/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-gpio linux-gpio/ https://lore.kernel.org/linux-gpio \
		linux-gpio@vger.kernel.org
	public-inbox-index linux-gpio

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-gpio


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git