From: Guenter Roeck <linux@roeck-us.net>
To: Michael Walle <michael@walle.cc>,
linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Lee Jones" <lee.jones@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jason Cooper" <jason@lakedaemon.net>,
"Marc Zyngier" <maz@kernel.org>
Subject: Re: [PATCH 08/18] watchdog: add support for sl28cpld watchdog
Date: Tue, 17 Mar 2020 20:17:32 -0700 [thread overview]
Message-ID: <943270c6-970a-1552-5547-c30aea597b4a@roeck-us.net> (raw)
In-Reply-To: <20200317205017.28280-9-michael@walle.cc>
On 3/17/20 1:50 PM, Michael Walle wrote:
> This adds support for the watchdog of the sl28cpld board management
> controller. This is part of a multi-function device driver.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> drivers/watchdog/Kconfig | 11 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/sl28cpld_wdt.c | 238 ++++++++++++++++++++++++++++++++
> 3 files changed, 250 insertions(+)
> create mode 100644 drivers/watchdog/sl28cpld_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 9ea2b43d4b01..c78b90ccc8cf 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -340,6 +340,17 @@ config MLX_WDT
> To compile this driver as a module, choose M here: the
> module will be called mlx-wdt.
>
> +config SL28CPLD_WATCHDOG
> + tristate "Kontron sl28 watchdog"
> + depends on MFD_SL28CPLD
> + select WATCHDOG_CORE
> + help
> + Say Y here to include support for the watchdog timer
> + on the Kontron sl28 CPLD.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sl28cpld_wdt.
> +
> # ALPHA Architecture
>
> # ARM Architecture
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 2ee352bf3372..060e2f895fe8 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -223,3 +223,4 @@ obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
> obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
> obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
> +obj-$(CONFIG_SL28CPLD_WATCHDOG) += sl28cpld_wdt.o
> diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
> new file mode 100644
> index 000000000000..5927b7ad0be4
> --- /dev/null
> +++ b/drivers/watchdog/sl28cpld_wdt.c
> @@ -0,0 +1,238 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * SMARC-sAL28 Watchdog driver.
> + *
> + * Copyright 2019 Kontron Europe GmbH
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +/*
> + * Watchdog timer block registers.
> + */
> +#define SL28CPLD_WDT_CTRL 0
> +#define WDT_CTRL_EN BIT(0)
> +#define WDT_CTRL_LOCK BIT(2)
> +#define SL28CPLD_WDT_TIMEOUT 1
> +#define SL28CPLD_WDT_KICK 2
> +#define WDT_KICK_VALUE 0x6b
> +#define SL28CPLD_WDT_COUNT 3
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
> +
> +struct sl28cpld_wdt {
> + struct watchdog_device wdd;
> + struct regmap *regmap;
> + u32 offset;
> +};
> +
> +static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_write(wdt->regmap, wdt->offset + SL28CPLD_WDT_KICK,
> + WDT_KICK_VALUE);
> +}
> +
> +static int sl28cpld_wdt_start(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int val;
> +
> + val = WDT_CTRL_EN;
> + if (nowayout)
> + val |= WDT_CTRL_LOCK;
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
> + val, val);
> +}
> +
> +static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + return regmap_update_bits(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
> + WDT_CTRL_EN, 0);
> +}
> +
> +static unsigned int sl28cpld_wdt_status(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + unsigned int status;
> + int ret;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL,
> + &status);
> + if (ret < 0)
> + return 0;
> +
> + /* is the watchdog timer running? */
> + return (status & WDT_CTRL_EN) << WDOG_ACTIVE;
> +}
> +
> +static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> + int ret;
> + unsigned int val;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_COUNT, &val);
> + if (ret < 0)
> + return 0;
> +
> + return val;
> +}
> +
> +static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + int ret;
> + struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> + ret = regmap_write(wdt->regmap, wdt->offset + SL28CPLD_WDT_TIMEOUT,
> + timeout);
> + if (ret == 0)
> + wdd->timeout = timeout;
> +
> + return ret;
> +}
> +
> +static const struct watchdog_info sl28cpld_wdt_info = {
> + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> + .identity = "SMARC-sAL28 CPLD watchdog",
> +};
> +
> +static struct watchdog_ops sl28cpld_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = sl28cpld_wdt_start,
> + .stop = sl28cpld_wdt_stop,
> + .status = sl28cpld_wdt_status,
> + .ping = sl28cpld_wdt_ping,
> + .set_timeout = sl28cpld_wdt_set_timeout,
> + .get_timeleft = sl28cpld_wdt_get_timeleft,
> +};
> +
> +static int sl28cpld_wdt_locked(struct sl28cpld_wdt *wdt)
> +{
> + unsigned int val;
> + int ret;
> +
> + ret = regmap_read(wdt->regmap, wdt->offset + SL28CPLD_WDT_CTRL, &val);
> + if (ret < 0)
> + return ret;
> +
> + return val & WDT_CTRL_LOCK;
> +}
> +
> +static int sl28cpld_wdt_probe(struct platform_device *pdev)
> +{
> + struct sl28cpld_wdt *wdt;
> + struct watchdog_device *wdd;
> + struct resource *res;
> + unsigned int val;
> + int ret;
> +
> + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + if (!pdev->dev.parent)
> + return -ENODEV;
> +
> + wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
> + if (!wdt->regmap)
> + return -ENODEV;
> +
> + res = platform_get_resource(pdev, IORESOURCE_REG, 0);
> + if (res == NULL)
> + return -EINVAL;
> + wdt->offset = res->start;
> +
> + /* initialize struct watchdog_device */
> + wdd = &wdt->wdd;
> + wdd->parent = &pdev->dev;
> + wdd->info = &sl28cpld_wdt_info;
> + wdd->ops = &sl28cpld_wdt_ops;
> + wdd->min_timeout = 1;
> + wdd->max_timeout = 255;
> +
> + watchdog_set_drvdata(wdd, wdt);
> +
> + /* if the watchdog is locked, we set nowayout to true */
> + ret = sl28cpld_wdt_locked(wdt);
> + if (ret < 0)
> + return ret;
> + if (ret)
> + nowayout = true;
> + watchdog_set_nowayout(wdd, nowayout);
> +
> + /*
> + * Initial timeout value, can either be set by kernel parameter or by
> + * the device tree. If both are not given the current value is used.
> + */
> + watchdog_init_timeout(wdd, timeout, &pdev->dev);
> + if (wdd->timeout) {
> + sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
> + } else {
> + ret = regmap_read(wdt->regmap,
> + wdt->offset + SL28CPLD_WDT_TIMEOUT, &val);
> + if (ret < 0)
> + return ret;
> + wdd->timeout = val;
> + }
> +
> + ret = watchdog_register_device(wdd);
Please use devm_watchdog_register_device().
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to register watchdog device\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, wdt);
> +
> + dev_info(&pdev->dev, "CPLD watchdog: initial timeout %d sec%s\n",
> + wdd->timeout, nowayout ? ", nowayout" : "");
> +
> + return 0;
> +}
> +
> +static int sl28cpld_wdt_remove(struct platform_device *pdev)
> +{
> + struct sl28cpld_wdt *wdt = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&wdt->wdd);
> +
> + return 0;
> +}
> +
> +static void sl28cpld_wdt_shutdown(struct platform_device *pdev)
Please use watchdog_stop_on_reboot().
Thanks,
Guenter
> +{
> + struct sl28cpld_wdt *wdt = platform_get_drvdata(pdev);
> +
> + sl28cpld_wdt_stop(&wdt->wdd);
> +}
> +
> +static struct platform_driver sl28cpld_wdt_driver = {
> + .probe = sl28cpld_wdt_probe,
> + .remove = sl28cpld_wdt_remove,
> + .shutdown = sl28cpld_wdt_shutdown,
> + .driver = {
> + .name = "sl28cpld-wdt",
> + },
> +};
> +module_platform_driver(sl28cpld_wdt_driver);
> +
> +MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
> +MODULE_LICENSE("GPL");
>
next prev parent reply other threads:[~2020-03-18 3:17 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 20:49 [PATCH 00/18] Add support for Kontron sl28cpld Michael Walle
2020-03-17 20:50 ` [PATCH 01/18] include/linux/ioport.h: add helper to define REG resource constructs Michael Walle
2020-03-17 20:50 ` [PATCH 02/18] mfd: mfd-core: Don't overwrite the dma_mask of the child device Michael Walle
2020-03-17 20:50 ` [PATCH 03/18] mfd: mfd-core: match device tree node against reg property Michael Walle
2020-03-17 20:50 ` [PATCH 04/18] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-03-30 22:35 ` Rob Herring
2020-03-31 7:40 ` Michael Walle
2020-03-17 20:50 ` [PATCH 05/18] mfd: Add support for Kontron sl28cpld management controller Michael Walle
2020-03-18 3:28 ` Guenter Roeck
2020-03-18 16:38 ` Michael Walle
2020-03-17 20:50 ` [PATCH 06/18] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-03-18 16:53 ` Guenter Roeck
2020-03-18 17:06 ` Michael Walle
2020-03-18 20:35 ` Guenter Roeck
2020-03-17 20:50 ` [PATCH 07/18] dt-bindings: watchdog: Add bindings for sl28cpld watchdog Michael Walle
2020-03-17 20:50 ` [PATCH 08/18] watchdog: add support " Michael Walle
2020-03-18 3:17 ` Guenter Roeck [this message]
2020-03-17 20:50 ` [PATCH 09/18] dt-bindings: pwm: Add bindings for sl28cpld PWM controller Michael Walle
2020-03-17 20:50 ` [PATCH 10/18] pwm: add support " Michael Walle
2020-03-17 20:50 ` [PATCH 11/18] dt-bindings: gpio: Add bindings for sl28cpld GPIO controller Michael Walle
2020-03-17 20:50 ` [PATCH 12/18] gpio: add support for the " Michael Walle
2020-03-18 9:14 ` Bartosz Golaszewski
2020-03-18 12:45 ` Michael Walle
2020-03-25 11:50 ` Bartosz Golaszewski
2020-03-26 20:05 ` Michael Walle
2020-03-27 10:20 ` Linus Walleij
2020-03-27 15:28 ` Michael Walle
2020-03-27 19:01 ` Linus Walleij
2020-03-30 11:21 ` Bartosz Golaszewski
2020-03-30 11:48 ` Michael Walle
2020-03-28 12:04 ` Michael Walle
2020-03-28 17:20 ` Michael Walle
2020-03-17 20:50 ` [PATCH 13/18] dt-bindings: hwmon: Add bindings for sl28cpld hardware monitoring Michael Walle
2020-03-17 20:50 ` [PATCH 14/18] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-03-18 3:27 ` Guenter Roeck
2020-03-18 16:32 ` Michael Walle
2020-03-17 20:50 ` [PATCH 15/18] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-03-17 20:50 ` [PATCH 16/18] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-03-17 20:50 ` [PATCH 17/18] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-03-17 20:50 ` [PATCH 18/18] arm64: dts: freescale: sl28: enable fan support Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=943270c6-970a-1552-5547-c30aea597b4a@roeck-us.net \
--to=linux@roeck-us.net \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=maz@kernel.org \
--cc=michael@walle.cc \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).