From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Jon Hunter <jonathanh@nvidia.com>,
Vidya Sagar <vidyas@nvidia.com>,
linux-gpio <linux-gpio@vger.kernel.org>,
linux-tegra@vger.kernel.org
Subject: Re: [PATCH 1/3] gpio: tegra186: Derive register offsets from bank/port
Date: Tue, 12 Nov 2019 16:33:47 +0100 [thread overview]
Message-ID: <CAMpxmJU+iHwDr9Hb_KH=K_LHpOMTepcgZckhYHDVRg2WchSh_A@mail.gmail.com> (raw)
In-Reply-To: <20191108153353.3149078-1-thierry.reding@gmail.com>
pt., 8 lis 2019 o 16:33 Thierry Reding <thierry.reding@gmail.com> napisał(a):
>
> From: Thierry Reding <treding@nvidia.com>
>
> The register offsets for a given bank and port can be easily derived
> from the bank and port indices. Update the port descriptors to list only
> the bank and port numbers to simplify this.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> drivers/gpio/gpio-tegra186.c | 195 ++++++++++++++++++-----------------
> 1 file changed, 100 insertions(+), 95 deletions(-)
>
> diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
> index 0cc3f781592d..32714cefdfde 100644
> --- a/drivers/gpio/gpio-tegra186.c
> +++ b/drivers/gpio/gpio-tegra186.c
> @@ -44,9 +44,9 @@
>
> struct tegra_gpio_port {
> const char *name;
> - unsigned int offset;
> + unsigned int bank;
> + unsigned int port;
> unsigned int pins;
> - unsigned int irq;
> };
>
> struct tegra_gpio_soc {
> @@ -90,12 +90,15 @@ static void __iomem *tegra186_gpio_get_base(struct tegra_gpio *gpio,
> unsigned int pin)
> {
> const struct tegra_gpio_port *port;
> + unsigned int offset;
>
> port = tegra186_gpio_get_port(gpio, &pin);
> if (!port)
> return NULL;
>
> - return gpio->base + port->offset + pin * 0x20;
> + offset = port->bank * 0x1000 + port->port * 0x200;
> +
> + return gpio->base + offset + pin * 0x20;
> }
>
> static int tegra186_gpio_get_direction(struct gpio_chip *chip,
> @@ -343,12 +346,14 @@ static void tegra186_gpio_irq(struct irq_desc *desc)
>
> for (i = 0; i < gpio->soc->num_ports; i++) {
> const struct tegra_gpio_port *port = &gpio->soc->ports[i];
> - void __iomem *base = gpio->base + port->offset;
> unsigned int pin, irq;
> unsigned long value;
> + void __iomem *base;
> +
> + base = gpio->base + port->bank * 0x1000 + port->port * 0x200;
>
> - /* skip ports that are not associated with this controller */
> - if (parent != gpio->irq[port->irq])
> + /* skip ports that are not associated with this bank */
> + if (parent != gpio->irq[port->bank])
> goto skip;
>
> value = readl(base + TEGRA186_GPIO_INTERRUPT_STATUS(1));
> @@ -562,7 +567,7 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
> const struct tegra_gpio_port *port = &gpio->soc->ports[i];
>
> for (j = 0; j < port->pins; j++)
> - irq->map[offset + j] = irq->parents[port->irq];
> + irq->map[offset + j] = irq->parents[port->bank];
>
> offset += port->pins;
> }
> @@ -581,38 +586,38 @@ static int tegra186_gpio_remove(struct platform_device *pdev)
> return 0;
> }
>
> -#define TEGRA186_MAIN_GPIO_PORT(port, base, count, controller) \
> - [TEGRA186_MAIN_GPIO_PORT_##port] = { \
> - .name = #port, \
> - .offset = base, \
> - .pins = count, \
> - .irq = controller, \
> +#define TEGRA186_MAIN_GPIO_PORT(_name, _bank, _port, _pins) \
> + [TEGRA186_MAIN_GPIO_PORT_##_name] = { \
> + .name = #_name, \
> + .bank = _bank, \
> + .port = _port, \
> + .pins = _pins, \
> }
>
> static const struct tegra_gpio_port tegra186_main_ports[] = {
> - TEGRA186_MAIN_GPIO_PORT( A, 0x2000, 7, 2),
> - TEGRA186_MAIN_GPIO_PORT( B, 0x3000, 7, 3),
> - TEGRA186_MAIN_GPIO_PORT( C, 0x3200, 7, 3),
> - TEGRA186_MAIN_GPIO_PORT( D, 0x3400, 6, 3),
> - TEGRA186_MAIN_GPIO_PORT( E, 0x2200, 8, 2),
> - TEGRA186_MAIN_GPIO_PORT( F, 0x2400, 6, 2),
> - TEGRA186_MAIN_GPIO_PORT( G, 0x4200, 6, 4),
> - TEGRA186_MAIN_GPIO_PORT( H, 0x1000, 7, 1),
> - TEGRA186_MAIN_GPIO_PORT( I, 0x0800, 8, 0),
> - TEGRA186_MAIN_GPIO_PORT( J, 0x5000, 8, 5),
> - TEGRA186_MAIN_GPIO_PORT( K, 0x5200, 1, 5),
> - TEGRA186_MAIN_GPIO_PORT( L, 0x1200, 8, 1),
> - TEGRA186_MAIN_GPIO_PORT( M, 0x5600, 6, 5),
> - TEGRA186_MAIN_GPIO_PORT( N, 0x0000, 7, 0),
> - TEGRA186_MAIN_GPIO_PORT( O, 0x0200, 4, 0),
> - TEGRA186_MAIN_GPIO_PORT( P, 0x4000, 7, 4),
> - TEGRA186_MAIN_GPIO_PORT( Q, 0x0400, 6, 0),
> - TEGRA186_MAIN_GPIO_PORT( R, 0x0a00, 6, 0),
> - TEGRA186_MAIN_GPIO_PORT( T, 0x0600, 4, 0),
> - TEGRA186_MAIN_GPIO_PORT( X, 0x1400, 8, 1),
> - TEGRA186_MAIN_GPIO_PORT( Y, 0x1600, 7, 1),
> - TEGRA186_MAIN_GPIO_PORT(BB, 0x2600, 2, 2),
> - TEGRA186_MAIN_GPIO_PORT(CC, 0x5400, 4, 5),
> + TEGRA186_MAIN_GPIO_PORT( A, 2, 0, 7),
> + TEGRA186_MAIN_GPIO_PORT( B, 3, 0, 7),
> + TEGRA186_MAIN_GPIO_PORT( C, 3, 1, 7),
> + TEGRA186_MAIN_GPIO_PORT( D, 3, 2, 6),
> + TEGRA186_MAIN_GPIO_PORT( E, 2, 1, 8),
> + TEGRA186_MAIN_GPIO_PORT( F, 2, 2, 6),
> + TEGRA186_MAIN_GPIO_PORT( G, 4, 1, 6),
> + TEGRA186_MAIN_GPIO_PORT( H, 1, 0, 7),
> + TEGRA186_MAIN_GPIO_PORT( I, 0, 4, 8),
> + TEGRA186_MAIN_GPIO_PORT( J, 5, 0, 8),
> + TEGRA186_MAIN_GPIO_PORT( K, 5, 1, 1),
> + TEGRA186_MAIN_GPIO_PORT( L, 1, 1, 8),
> + TEGRA186_MAIN_GPIO_PORT( M, 5, 3, 6),
> + TEGRA186_MAIN_GPIO_PORT( N, 0, 0, 7),
> + TEGRA186_MAIN_GPIO_PORT( O, 0, 1, 4),
> + TEGRA186_MAIN_GPIO_PORT( P, 4, 0, 7),
> + TEGRA186_MAIN_GPIO_PORT( Q, 0, 2, 6),
> + TEGRA186_MAIN_GPIO_PORT( R, 0, 5, 6),
> + TEGRA186_MAIN_GPIO_PORT( T, 0, 3, 4),
> + TEGRA186_MAIN_GPIO_PORT( X, 1, 2, 8),
> + TEGRA186_MAIN_GPIO_PORT( Y, 1, 3, 7),
> + TEGRA186_MAIN_GPIO_PORT(BB, 2, 3, 2),
> + TEGRA186_MAIN_GPIO_PORT(CC, 5, 2, 4),
> };
>
> static const struct tegra_gpio_soc tegra186_main_soc = {
> @@ -622,23 +627,23 @@ static const struct tegra_gpio_soc tegra186_main_soc = {
> .instance = 0,
> };
>
> -#define TEGRA186_AON_GPIO_PORT(port, base, count, controller) \
> - [TEGRA186_AON_GPIO_PORT_##port] = { \
> - .name = #port, \
> - .offset = base, \
> - .pins = count, \
> - .irq = controller, \
> +#define TEGRA186_AON_GPIO_PORT(_name, _bank, _port, _pins) \
> + [TEGRA186_AON_GPIO_PORT_##_name] = { \
> + .name = #_name, \
> + .bank = _bank, \
> + .port = _port, \
> + .pins = _pins, \
> }
>
> static const struct tegra_gpio_port tegra186_aon_ports[] = {
> - TEGRA186_AON_GPIO_PORT( S, 0x0200, 5, 0),
> - TEGRA186_AON_GPIO_PORT( U, 0x0400, 6, 0),
> - TEGRA186_AON_GPIO_PORT( V, 0x0800, 8, 0),
> - TEGRA186_AON_GPIO_PORT( W, 0x0a00, 8, 0),
> - TEGRA186_AON_GPIO_PORT( Z, 0x0e00, 4, 0),
> - TEGRA186_AON_GPIO_PORT(AA, 0x0c00, 8, 0),
> - TEGRA186_AON_GPIO_PORT(EE, 0x0600, 3, 0),
> - TEGRA186_AON_GPIO_PORT(FF, 0x0000, 5, 0),
> + TEGRA186_AON_GPIO_PORT( S, 0, 1, 5),
> + TEGRA186_AON_GPIO_PORT( U, 0, 2, 6),
> + TEGRA186_AON_GPIO_PORT( V, 0, 4, 8),
> + TEGRA186_AON_GPIO_PORT( W, 0, 5, 8),
> + TEGRA186_AON_GPIO_PORT( Z, 0, 7, 4),
> + TEGRA186_AON_GPIO_PORT(AA, 0, 6, 8),
> + TEGRA186_AON_GPIO_PORT(EE, 0, 3, 3),
> + TEGRA186_AON_GPIO_PORT(FF, 0, 0, 5),
> };
>
> static const struct tegra_gpio_soc tegra186_aon_soc = {
> @@ -648,43 +653,43 @@ static const struct tegra_gpio_soc tegra186_aon_soc = {
> .instance = 1,
> };
>
> -#define TEGRA194_MAIN_GPIO_PORT(port, base, count, controller) \
> - [TEGRA194_MAIN_GPIO_PORT_##port] = { \
> - .name = #port, \
> - .offset = base, \
> - .pins = count, \
> - .irq = controller, \
> +#define TEGRA194_MAIN_GPIO_PORT(_name, _bank, _port, _pins) \
> + [TEGRA194_MAIN_GPIO_PORT_##_name] = { \
> + .name = #_name, \
> + .bank = _bank, \
> + .port = _port, \
> + .pins = _pins, \
> }
>
> static const struct tegra_gpio_port tegra194_main_ports[] = {
> - TEGRA194_MAIN_GPIO_PORT( A, 0x1400, 8, 1),
> - TEGRA194_MAIN_GPIO_PORT( B, 0x4e00, 2, 4),
> - TEGRA194_MAIN_GPIO_PORT( C, 0x4600, 8, 4),
> - TEGRA194_MAIN_GPIO_PORT( D, 0x4800, 4, 4),
> - TEGRA194_MAIN_GPIO_PORT( E, 0x4a00, 8, 4),
> - TEGRA194_MAIN_GPIO_PORT( F, 0x4c00, 6, 4),
> - TEGRA194_MAIN_GPIO_PORT( G, 0x4000, 8, 4),
> - TEGRA194_MAIN_GPIO_PORT( H, 0x4200, 8, 4),
> - TEGRA194_MAIN_GPIO_PORT( I, 0x4400, 5, 4),
> - TEGRA194_MAIN_GPIO_PORT( J, 0x5200, 6, 5),
> - TEGRA194_MAIN_GPIO_PORT( K, 0x3000, 8, 3),
> - TEGRA194_MAIN_GPIO_PORT( L, 0x3200, 4, 3),
> - TEGRA194_MAIN_GPIO_PORT( M, 0x2600, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT( N, 0x2800, 3, 2),
> - TEGRA194_MAIN_GPIO_PORT( O, 0x5000, 6, 5),
> - TEGRA194_MAIN_GPIO_PORT( P, 0x2a00, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT( Q, 0x2c00, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT( R, 0x2e00, 6, 2),
> - TEGRA194_MAIN_GPIO_PORT( S, 0x3600, 8, 3),
> - TEGRA194_MAIN_GPIO_PORT( T, 0x3800, 8, 3),
> - TEGRA194_MAIN_GPIO_PORT( U, 0x3a00, 1, 3),
> - TEGRA194_MAIN_GPIO_PORT( V, 0x1000, 8, 1),
> - TEGRA194_MAIN_GPIO_PORT( W, 0x1200, 2, 1),
> - TEGRA194_MAIN_GPIO_PORT( X, 0x2000, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT( Y, 0x2200, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT( Z, 0x2400, 8, 2),
> - TEGRA194_MAIN_GPIO_PORT(FF, 0x3400, 2, 3),
> - TEGRA194_MAIN_GPIO_PORT(GG, 0x0000, 2, 0)
> + TEGRA194_MAIN_GPIO_PORT( A, 1, 2, 8),
> + TEGRA194_MAIN_GPIO_PORT( B, 4, 7, 2),
> + TEGRA194_MAIN_GPIO_PORT( C, 4, 3, 8),
> + TEGRA194_MAIN_GPIO_PORT( D, 4, 4, 4),
> + TEGRA194_MAIN_GPIO_PORT( E, 4, 5, 8),
> + TEGRA194_MAIN_GPIO_PORT( F, 4, 6, 6),
> + TEGRA194_MAIN_GPIO_PORT( G, 4, 0, 8),
> + TEGRA194_MAIN_GPIO_PORT( H, 4, 1, 8),
> + TEGRA194_MAIN_GPIO_PORT( I, 4, 2, 5),
> + TEGRA194_MAIN_GPIO_PORT( J, 5, 1, 6),
> + TEGRA194_MAIN_GPIO_PORT( K, 3, 0, 8),
> + TEGRA194_MAIN_GPIO_PORT( L, 3, 1, 4),
> + TEGRA194_MAIN_GPIO_PORT( M, 2, 3, 8),
> + TEGRA194_MAIN_GPIO_PORT( N, 2, 4, 3),
> + TEGRA194_MAIN_GPIO_PORT( O, 5, 0, 6),
> + TEGRA194_MAIN_GPIO_PORT( P, 2, 5, 8),
> + TEGRA194_MAIN_GPIO_PORT( Q, 2, 6, 8),
> + TEGRA194_MAIN_GPIO_PORT( R, 2, 7, 6),
> + TEGRA194_MAIN_GPIO_PORT( S, 3, 3, 8),
> + TEGRA194_MAIN_GPIO_PORT( T, 3, 4, 8),
> + TEGRA194_MAIN_GPIO_PORT( U, 3, 5, 1),
> + TEGRA194_MAIN_GPIO_PORT( V, 1, 0, 8),
> + TEGRA194_MAIN_GPIO_PORT( W, 1, 1, 2),
> + TEGRA194_MAIN_GPIO_PORT( X, 2, 0, 8),
> + TEGRA194_MAIN_GPIO_PORT( Y, 2, 1, 8),
> + TEGRA194_MAIN_GPIO_PORT( Z, 2, 2, 8),
> + TEGRA194_MAIN_GPIO_PORT(FF, 3, 2, 2),
> + TEGRA194_MAIN_GPIO_PORT(GG, 0, 0, 2)
> };
>
> static const struct tegra_gpio_soc tegra194_main_soc = {
> @@ -694,20 +699,20 @@ static const struct tegra_gpio_soc tegra194_main_soc = {
> .instance = 0,
> };
>
> -#define TEGRA194_AON_GPIO_PORT(port, base, count, controller) \
> - [TEGRA194_AON_GPIO_PORT_##port] = { \
> - .name = #port, \
> - .offset = base, \
> - .pins = count, \
> - .irq = controller, \
> +#define TEGRA194_AON_GPIO_PORT(_name, _bank, _port, _pins) \
> + [TEGRA194_AON_GPIO_PORT_##_name] = { \
> + .name = #_name, \
> + .bank = _bank, \
> + .port = _port, \
> + .pins = _pins, \
> }
>
> static const struct tegra_gpio_port tegra194_aon_ports[] = {
> - TEGRA194_AON_GPIO_PORT(AA, 0x0600, 8, 0),
> - TEGRA194_AON_GPIO_PORT(BB, 0x0800, 4, 0),
> - TEGRA194_AON_GPIO_PORT(CC, 0x0200, 8, 0),
> - TEGRA194_AON_GPIO_PORT(DD, 0x0400, 3, 0),
> - TEGRA194_AON_GPIO_PORT(EE, 0x0000, 7, 0)
> + TEGRA194_AON_GPIO_PORT(AA, 0, 3, 8),
> + TEGRA194_AON_GPIO_PORT(BB, 0, 4, 4),
> + TEGRA194_AON_GPIO_PORT(CC, 0, 1, 8),
> + TEGRA194_AON_GPIO_PORT(DD, 0, 2, 3),
> + TEGRA194_AON_GPIO_PORT(EE, 0, 0, 7)
> };
>
> static const struct tegra_gpio_soc tegra194_aon_soc = {
> --
> 2.23.0
>
All three applied, thanks!
Bartosz
prev parent reply other threads:[~2019-11-12 15:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-08 15:33 [PATCH 1/3] gpio: tegra186: Derive register offsets from bank/port Thierry Reding
2019-11-08 15:33 ` [PATCH 2/3] gpio: tegra186: Program interrupt route mapping Thierry Reding
2019-11-12 10:11 ` Bartosz Golaszewski
2019-11-12 14:10 ` Greg KH
2019-11-12 15:33 ` Bartosz Golaszewski
2019-11-08 15:33 ` [PATCH 3/3] gpio: tegra186: Add debounce support Thierry Reding
2019-11-12 15:33 ` Bartosz Golaszewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMpxmJU+iHwDr9Hb_KH=K_LHpOMTepcgZckhYHDVRg2WchSh_A@mail.gmail.com' \
--to=bgolaszewski@baylibre.com \
--cc=jonathanh@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).