linux-gpio.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Lina Iyer <ilina@codeaurora.org>,
	swboyd@chromium.org, evgreen@chromium.org,
	linus.walleij@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	bjorn.andersson@linaro.org, mkshah@codeaurora.org,
	linux-gpio@vger.kernel.org, rnayak@codeaurora.org
Subject: Re: [PATCH RFC 03/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs
Date: Fri, 30 Aug 2019 15:50:42 +0100	[thread overview]
Message-ID: <d2a45d45-3071-ab8d-060b-92a2812a8d42@kernel.org> (raw)
In-Reply-To: <20190829181203.2660-4-ilina@codeaurora.org>

[Please use my kernel.org address in the future. The days of this
arm.com address are numbered...]

On 29/08/2019 19:11, Lina Iyer wrote:
> Introduce a new domain for wakeup capable GPIOs. The domain can be
> requested using the bus token DOMAIN_BUS_WAKEUP. In the following
> patches, we will specify PDC as the wakeup-parent for the TLMM GPIO
> irqchip. Requesting a wakeup GPIO will setup the GPIO and the
> corresponding PDC interrupt as its parent.
> 
> Co-developed-by: Stephen Boyd <swboyd@chromium.org>
> Signed-off-by: Lina Iyer <ilina@codeaurora.org>
> ---
>  drivers/irqchip/qcom-pdc.c   | 104 ++++++++++++++++++++++++++++++++---
>  include/linux/soc/qcom/irq.h |  34 ++++++++++++
>  2 files changed, 129 insertions(+), 9 deletions(-)
>  create mode 100644 include/linux/soc/qcom/irq.h
> 
> diff --git a/drivers/irqchip/qcom-pdc.c b/drivers/irqchip/qcom-pdc.c
> index 338fae604af5..ad1faf634bcf 100644
> --- a/drivers/irqchip/qcom-pdc.c
> +++ b/drivers/irqchip/qcom-pdc.c
> @@ -13,12 +13,13 @@
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/of_device.h>
> +#include <linux/soc/qcom/irq.h>
>  #include <linux/spinlock.h>
> -#include <linux/platform_device.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  
>  #define PDC_MAX_IRQS		126
> +#define PDC_MAX_GPIO_IRQS	256
>  
>  #define CLEAR_INTR(reg, intr)	(reg & ~(1 << intr))
>  #define ENABLE_INTR(reg, intr)	(reg | (1 << intr))
> @@ -26,6 +27,8 @@
>  #define IRQ_ENABLE_BANK		0x10
>  #define IRQ_i_CFG		0x110
>  
> +#define PDC_NO_PARENT_IRQ	~0UL
> +
>  struct pdc_pin_region {
>  	u32 pin_base;
>  	u32 parent_base;
> @@ -65,23 +68,35 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
>  
>  static void qcom_pdc_gic_disable(struct irq_data *d)
>  {
> +	if (d->hwirq == GPIO_NO_WAKE_IRQ)
> +		return;
> +
>  	pdc_enable_intr(d, false);
>  	irq_chip_disable_parent(d);
>  }
>  
>  static void qcom_pdc_gic_enable(struct irq_data *d)
>  {
> +	if (d->hwirq == GPIO_NO_WAKE_IRQ)
> +		return;
> +
>  	pdc_enable_intr(d, true);
>  	irq_chip_enable_parent(d);
>  }
>  
>  static void qcom_pdc_gic_mask(struct irq_data *d)
>  {
> +	if (d->hwirq == GPIO_NO_WAKE_IRQ)
> +		return;
> +
>  	irq_chip_mask_parent(d);
>  }
>  
>  static void qcom_pdc_gic_unmask(struct irq_data *d)
>  {
> +	if (d->hwirq == GPIO_NO_WAKE_IRQ)
> +		return;
> +
>  	irq_chip_unmask_parent(d);
>  }
>  
> @@ -124,6 +139,9 @@ static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
>  	int pin_out = d->hwirq;
>  	enum pdc_irq_config_bits pdc_type;
>  
> +	if (pin_out == GPIO_NO_WAKE_IRQ)
> +		return 0;
> +
>  	switch (type) {
>  	case IRQ_TYPE_EDGE_RISING:
>  		pdc_type = PDC_EDGE_RISING;
> @@ -181,8 +199,7 @@ static irq_hw_number_t get_parent_hwirq(int pin)
>  			return (region->parent_base + pin - region->pin_base);
>  	}
>  
> -	WARN_ON(1);
> -	return ~0UL;
> +	return PDC_NO_PARENT_IRQ;
>  }
>  
>  static int qcom_pdc_translate(struct irq_domain *d, struct irq_fwspec *fwspec,
> @@ -211,17 +228,17 @@ static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq,
>  
>  	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
>  	if (ret)
> -		return -EINVAL;
> -
> -	parent_hwirq = get_parent_hwirq(hwirq);
> -	if (parent_hwirq == ~0UL)
> -		return -EINVAL;
> +		return ret;
>  
>  	ret  = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
>  					     &qcom_pdc_gic_chip, NULL);
>  	if (ret)
>  		return ret;
>  
> +	parent_hwirq = get_parent_hwirq(hwirq);
> +	if (parent_hwirq == PDC_NO_PARENT_IRQ)
> +		return 0;
> +
>  	if (type & IRQ_TYPE_EDGE_BOTH)
>  		type = IRQ_TYPE_EDGE_RISING;
>  
> @@ -244,6 +261,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
>  	.free		= irq_domain_free_irqs_common,
>  };
>  
> +static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
> +			       unsigned int nr_irqs, void *data)
> +{
> +	struct irq_fwspec *fwspec = data;
> +	struct irq_fwspec parent_fwspec;
> +	irq_hw_number_t hwirq, parent_hwirq;
> +	unsigned int type;
> +	int ret;
> +
> +	ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
> +	if (ret)
> +		return ret;
> +
> +	ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
> +					    &qcom_pdc_gic_chip, NULL);
> +	if (ret)
> +		return ret;
> +
> +	if (hwirq == GPIO_NO_WAKE_IRQ)
> +		return 0;
> +
> +	parent_hwirq = get_parent_hwirq(hwirq);
> +	if (parent_hwirq == PDC_NO_PARENT_IRQ)
> +		return 0;
> +
> +	if (type & IRQ_TYPE_EDGE_BOTH)
> +		type = IRQ_TYPE_EDGE_RISING;
> +
> +	if (type & IRQ_TYPE_LEVEL_MASK)
> +		type = IRQ_TYPE_LEVEL_HIGH;
> +
> +	parent_fwspec.fwnode      = domain->parent->fwnode;
> +	parent_fwspec.param_count = 3;
> +	parent_fwspec.param[0]    = 0;
> +	parent_fwspec.param[1]    = parent_hwirq;
> +	parent_fwspec.param[2]    = type;
> +
> +	return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
> +					    &parent_fwspec);
> +}
> +
> +static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
> +				       struct irq_fwspec *fwspec,
> +				       enum irq_domain_bus_token bus_token)
> +{
> +	return (bus_token == DOMAIN_BUS_WAKEUP);
> +}
> +
> +static const struct irq_domain_ops qcom_pdc_gpio_ops = {
> +	.select		= qcom_pdc_gpio_domain_select,
> +	.alloc		= qcom_pdc_gpio_alloc,
> +	.free		= irq_domain_free_irqs_common,
> +};
> +
>  static int pdc_setup_pin_mapping(struct device_node *np)
>  {
>  	int ret, n;
> @@ -282,7 +353,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
>  
>  static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
>  {
> -	struct irq_domain *parent_domain, *pdc_domain;
> +	struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
>  	int ret;
>  
>  	pdc_base = of_iomap(node, 0);
> @@ -313,8 +384,23 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
>  		goto fail;
>  	}
>  
> +	pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain,
> +						      IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP,
> +						      PDC_MAX_GPIO_IRQS,
> +						      of_fwnode_handle(node),
> +						      &qcom_pdc_gpio_ops, NULL);
> +	if (!pdc_gpio_domain) {
> +		pr_err("%pOF: GIC domain add failed for GPIO domain\n", node);
> +		ret = -ENOMEM;
> +		goto remove;
> +	}
> +
> +	irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
> +
>  	return 0;
>  
> +remove:
> +	irq_domain_remove(pdc_domain);
>  fail:
>  	kfree(pdc_region);
>  	iounmap(pdc_base);
> diff --git a/include/linux/soc/qcom/irq.h b/include/linux/soc/qcom/irq.h
> new file mode 100644
> index 000000000000..73239917dc38
> --- /dev/null
> +++ b/include/linux/soc/qcom/irq.h
> @@ -0,0 +1,34 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __QCOM_IRQ_H
> +#define __QCOM_IRQ_H
> +
> +#include <linux/irqdomain.h>
> +
> +#define GPIO_NO_WAKE_IRQ	~0U
> +
> +/**
> + * QCOM specific IRQ domain flags that distinguishes the handling of wakeup
> + * capable interrupts by different interrupt controllers.
> + *
> + * IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP: Line must be masked at TLMM and the
> + *                                  interrupt configuration is done at PDC
> + * IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP: Interrupt configuration is handled at TLMM
> + */
> +#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP		(1 << 17)
> +#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP		(1 << 18)

Any reason why you're starting at bit 17? The available range in from
bit 16... But overall, it would be better if you expressed it as:

#define IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP	(IRQ_DOMAIN_FLAG_NONCORE << 0)
#define IRQ_DOMAIN_FLAG_QCOM_MPM_WAKEUP (IRQ_DOMAIN_FLAG_NONCORE << 1)

> +
> +/**
> + * irq_domain_qcom_handle_wakeup: Return if the domain handles interrupt
> + *                                configuration
> + * @parent: irq domain
> + *
> + * This QCOM specific irq domain call returns if the interrupt controller
> + * requires the interrupt be masked at the child interrupt controller.
> + */
> +static inline bool irq_domain_qcom_handle_wakeup(struct irq_domain *parent)
> +{
> +	return (parent->flags & IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP);
> +}
> +
> +#endif
> 

But most of this file isn't used by this patch, so maybe it should be
moved somewhere else...

Thanks,

	M.
-- 
Jazz is not dead, it just smells funny...

  reply	other threads:[~2019-08-30 14:50 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-29 18:11 [PATCH RFC 00/14] qcom: support wakeup capable GPIOs Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 01/14] irqdomain: add bus token DOMAIN_BUS_WAKEUP Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 02/14] drivers: irqchip: pdc: Do not toggle IRQ_ENABLE during mask/unmask Lina Iyer
2019-09-06  0:39   ` Stephen Boyd
2019-09-11 16:15     ` Lina Iyer
2019-09-20 22:22       ` Stephen Boyd
2019-09-20 22:31         ` Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 03/14] drivers: irqchip: add PDC irqdomain for wakeup capable GPIOs Lina Iyer
2019-08-30 14:50   ` Marc Zyngier [this message]
2019-08-30 15:58     ` Lina Iyer
2019-09-02  8:21       ` Marc Zyngier
2019-09-03 22:51   ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 04/14] of: irq: document properties for wakeup interrupt parent Lina Iyer
2019-09-02 13:38   ` Rob Herring
2019-08-29 18:11 ` [PATCH RFC 05/14] dt-bindings/interrupt-controller: pdc: add SPI config register Lina Iyer
2019-09-02 13:38   ` Rob Herring
2019-09-02 13:53     ` Marc Zyngier
2019-09-03 17:07       ` Lina Iyer
2019-09-06  0:03         ` Stephen Boyd
2019-09-13 19:53           ` Lina Iyer
2019-09-17 21:50             ` Lina Iyer
2019-09-20 22:20               ` Stephen Boyd
2019-09-23  6:11                 ` Sibi Sankar
     [not found]   ` <CACRpkdaReFzjb_hcDbQwqMX+whzscLpeZpJPHKqOo+9tANzemA@mail.gmail.com>
2019-09-11 15:19     ` Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 06/14] drivers: irqchip: pdc: additionally set type in SPI config registers Lina Iyer
2019-09-06  0:22   ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 07/14] genirq: Introduce irq_chip_get/set_parent_state calls Lina Iyer
2019-09-06  0:35   ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 08/14] drivers: irqchip: pdc: Add irqchip set/get state calls Lina Iyer
2019-09-06  0:09   ` Stephen Boyd
2019-08-29 18:11 ` [PATCH RFC 09/14] drivers: pinctrl: msm: fix use of deprecated gpiolib APIs Lina Iyer
2019-09-06  0:11   ` Stephen Boyd
2019-09-11 10:19   ` Linus Walleij
2019-09-11 16:16     ` Lina Iyer
2019-08-29 18:11 ` [PATCH RFC 10/14] drivers: pinctrl: msm: setup GPIO chip in hierarchy Lina Iyer
2019-08-29 18:12 ` [PATCH RFC 11/14] drivers: pinctrl: sdm845: add PDC wakeup interrupt map for GPIOs Lina Iyer
2019-09-06  0:24   ` Stephen Boyd
2019-08-29 18:12 ` [PATCH RFC 12/14] arm64: dts: qcom: add PDC interrupt controller for SDM845 Lina Iyer
2019-09-09 11:26   ` Maulik Shah
2019-08-29 18:12 ` [PATCH RFC 13/14] arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845 Lina Iyer
2019-08-29 18:12 ` [PATCH RFC 14/14] arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 Lina Iyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d2a45d45-3071-ab8d-060b-92a2812a8d42@kernel.org \
    --to=maz@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=ilina@codeaurora.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkshah@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).