From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 04/17] hwmon: (smsc47m192) Fix overflows seen when writing into limit attributes
Date: Sun, 4 Dec 2016 20:55:27 -0800 [thread overview]
Message-ID: <1480913740-5678-4-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1480913740-5678-1-git-send-email-linux@roeck-us.net>
Module test reports overflows when writing into temperature and voltage
limit attributes
temp1_min: Suspected overflow: [127000 vs. 0]
temp1_max: Suspected overflow: [127000 vs. 0]
temp1_offset: Suspected overflow: [127000 vs. 0]
temp2_min: Suspected overflow: [127000 vs. 0]
temp2_max: Suspected overflow: [127000 vs. 0]
temp2_offset: Suspected overflow: [127000 vs. 0]
temp3_min: Suspected overflow: [127000 vs. 0]
temp3_max: Suspected overflow: [127000 vs. 0]
temp3_offset: Suspected overflow: [127000 vs. 0]
in0_min: Suspected overflow: [3320 vs. 0]
in0_max: Suspected overflow: [3320 vs. 0]
in4_min: Suspected overflow: [15938 vs. 0]
in4_max: Suspected overflow: [15938 vs. 0]
in6_min: Suspected overflow: [1992 vs. 0]
in6_max: Suspected overflow: [1992 vs. 0]
in7_min: Suspected overflow: [2391 vs. 0]
in7_max: Suspected overflow: [2391 vs. 0]
The problem is caused by conversions from unsigned long to long and
from long to int.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/smsc47m192.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 6ac7cda72d4c..202e167d6a59 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -77,6 +77,7 @@ static inline unsigned int IN_FROM_REG(u8 reg, int n)
static inline u8 IN_TO_REG(unsigned long val, int n)
{
+ val = clamp_val(val, 0, 65535);
return clamp_val(SCALE(val, 192, nom_mv[n]), 0, 255);
}
@@ -84,7 +85,7 @@ static inline u8 IN_TO_REG(unsigned long val, int n)
* TEMP: 0.001 degC units (-128C to +127C)
* REG: 1C/bit, two's complement
*/
-static inline s8 TEMP_TO_REG(int val)
+static inline s8 TEMP_TO_REG(long val)
{
return SCALE(clamp_val(val, -128000, 127000), 1, 1000);
}
--
2.5.0
next prev parent reply other threads:[~2016-12-05 6:03 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-05 4:55 [PATCH 01/17] hwmon: (adm9240) Fix overflows seen when writing into limit attributes Guenter Roeck
2016-12-05 4:55 ` [PATCH 02/17] hwmon: (ds620) Fix overflows seen when writing temperature limits Guenter Roeck
2016-12-08 13:47 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 03/17] hwmon: (lm93) Fix overflows seen when writing into limit attributes Guenter Roeck
2016-12-13 14:01 ` Jean Delvare
2016-12-13 14:52 ` Guenter Roeck
2016-12-05 4:55 ` Guenter Roeck [this message]
2016-12-08 13:57 ` [PATCH 04/17] hwmon: (smsc47m192) " Jean Delvare
2016-12-08 19:24 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 05/17] hwmon: (adm1025) Fix overflows seen when writing voltage limits Guenter Roeck
2016-12-08 14:04 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 06/17] hwmon: (adm1026) Fix overflows seen when writing into limit attributes Guenter Roeck
2016-12-08 14:33 ` Jean Delvare
2016-12-08 15:34 ` Guenter Roeck
2016-12-09 9:29 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 07/17] hwmon: (adt7462) " Guenter Roeck
2016-12-08 15:08 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 08/17] hwmon: (adt7470) " Guenter Roeck
2016-12-08 15:14 ` Jean Delvare
2016-12-08 18:14 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 09/17] hwmon: (nct7802) " Guenter Roeck
2016-12-09 9:49 ` Jean Delvare
2016-12-09 14:22 ` Guenter Roeck
2016-12-09 15:25 ` Jean Delvare
2016-12-09 18:11 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 10/17] hwmon: (lm87) Fix overflow seen when writing voltage " Guenter Roeck
2016-12-09 15:07 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 11/17] hwmon: (lm85) Fix overflows " Guenter Roeck
2016-12-09 16:07 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 12/17] hwmon: (dme1737) Fix overflows seen when writing into " Guenter Roeck
2016-12-12 9:33 ` Jean Delvare
2016-12-12 14:21 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 13/17] hwmon: (emc2103) Fix overflows seen when temperature " Guenter Roeck
2016-12-12 10:44 ` Jean Delvare
2016-12-05 4:55 ` [PATCH 14/17] hwmon: (emcw201) Fix overflows seen when writing into " Guenter Roeck
2016-12-12 10:48 ` Jean Delvare
2016-12-12 14:23 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 15/17] hwmln: (g762) Fix overflows and crash seen when writing " Guenter Roeck
2016-12-12 11:14 ` Jean Delvare
2016-12-12 14:19 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 16/17] hwmon: (gl518sm) Fix overflows seen when writing into " Guenter Roeck
2016-12-13 9:48 ` Jean Delvare
2016-12-13 21:56 ` Guenter Roeck
2016-12-05 4:55 ` [PATCH 17/17] hwmon: (gl520sm) " Guenter Roeck
2016-12-13 9:56 ` Jean Delvare
2016-12-13 14:49 ` Guenter Roeck
2016-12-08 13:29 ` [PATCH 01/17] hwmon: (adm9240) " Jean Delvare
2016-12-08 15:18 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1480913740-5678-4-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).