From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-path: From: Eddie James To: linux-kernel@vger.kernel.org Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, gregkh@linuxfoundation.org, benh@kernel.crashing.org, linux@roeck-us.net, jdelvare@suse.com, mark.rutland@arm.com, openbmc@lists.ozlabs.org, robh+dt@kernel.org, joel@jms.id.au, Eddie James Subject: [PATCH v4 0/9] hwmon and fsi: Add On-Chip Controller (OCC) driver Date: Wed, 11 Jul 2018 16:01:29 -0500 Message-Id: <1531342898-15790-1-git-send-email-eajames@linux.vnet.ibm.com> List-ID: This series adds a hwmon driver to support the OCC on POWER8 and POWER9 processors. The OCC is an embedded processor that provides realtime power and thermal monitoring and management. The series also adds a "bus" driver to handle atomic communication between the service processor and the OCC on a POWER9 chip. This communication takes place over FSI bus to the SBE (Self-Boot engine) FIFO, which in turn communicates with the OCC. The driver for the SBEFIFO is already in linux-next as an FSI client driver. For POWER8 OCCs, communication between the service processor and the OCC is achieved over I2C bus. Changes since v3: * Add the FSI OCC driver. * Pull the sysfs attribute code into it's own file for cleanliness. * Various fixes for attribute creation and integer overflow. Changes since v2: * Add sysfs_notify for the error and throttling attributes when change is detected. * Removed occs_present counting of devices bound. * Improved remove() of P9 driver to avoid bad behavior with relation to OCC driver when unbound. * Added default cases (return EINVAL) for all sensor show functions. * Added temperature fault sensor. * Added back dt binding documentation for P9 to address checkpatch warning. * Added occs_present attribute from the poll response. Changes since v1: * Remove wait loop in P9 code, as that is now handled by FSI OCC driver. * Removed dt binding documentation for P9, FSI OCC driver will probe OCC hwmon driver automatically. * Moved OCC response code definitions to the OCC include file. * Fixed includes. * Changed some structure fields to __beXX as that is what they are. * Changed some errnos. * Removed some dev_err(). * Refactored P8 code a bit to use #defined addresses and magic values, and changed "goto retry" to a loop. * Refactored error handling a bit. Eddie James (9): fsi: Add On-Chip Controller (OCC) driver Documentation: hwmon: Add OCC documentation dt-bindings: i2c: Add P8 OCC hwmon device documentation hwmon: Add On-Chip Controller (OCC) hwmon driver hwmon (occ): Add command transport method for P8 and P9 hwmon (occ): Parse OCC poll response hwmon (occ): Add sensor types and versions hwmon (occ): Add sensor attributes and register hwmon device hwmon (occ): Add sysfs attributes for additional OCC data .../devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt | 25 + Documentation/hwmon/occ | 73 ++ drivers/fsi/Kconfig | 10 + drivers/fsi/Makefile | 1 + drivers/fsi/fsi-occ.c | 609 ++++++++++ drivers/hwmon/Kconfig | 2 + drivers/hwmon/Makefile | 1 + drivers/hwmon/occ/Kconfig | 28 + drivers/hwmon/occ/Makefile | 11 + drivers/hwmon/occ/common.c | 1250 ++++++++++++++++++++ drivers/hwmon/occ/common.h | 136 +++ drivers/hwmon/occ/p8_i2c.c | 264 +++++ drivers/hwmon/occ/p9_sbe.c | 115 ++ drivers/hwmon/occ/sysfs.c | 188 +++ include/linux/fsi-occ.h | 34 + 15 files changed, 2747 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt create mode 100644 Documentation/hwmon/occ create mode 100644 drivers/fsi/fsi-occ.c create mode 100644 drivers/hwmon/occ/Kconfig create mode 100644 drivers/hwmon/occ/Makefile create mode 100644 drivers/hwmon/occ/common.c create mode 100644 drivers/hwmon/occ/common.h create mode 100644 drivers/hwmon/occ/p8_i2c.c create mode 100644 drivers/hwmon/occ/p9_sbe.c create mode 100644 drivers/hwmon/occ/sysfs.c create mode 100644 include/linux/fsi-occ.h -- 1.8.3.1