From: Guenter Roeck <linux@roeck-us.net>
To: Hardware Monitoring <linux-hwmon@vger.kernel.org>
Cc: Jean Delvare <jdelvare@suse.com>, Guenter Roeck <linux@roeck-us.net>
Subject: [PATCH 03/13] hwmon: (nct6775) Move config variable declarations and initializations
Date: Thu, 20 Sep 2018 06:45:31 -0700 [thread overview]
Message-ID: <1537451141-27242-3-git-send-email-linux@roeck-us.net> (raw)
In-Reply-To: <1537451141-27242-1-git-send-email-linux@roeck-us.net>
Group configuration variable declarations and initialization together.
While this results in reading more registers than necessary for a given
chip, it improves code readability and simplifies extending the code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/nct6775.c | 30 +++++++++++-------------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index bd1c4772994a..aa8a44608ca3 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -3436,8 +3436,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
bool pwm6pin = false, pwm7pin = false;
int sioreg = data->sioreg;
- int cr24;
- int cr2c;
/* Store SIO_REG_ENABLE for use during resume */
superio_select(sioreg, NCT6775_LD_HWM);
@@ -3445,7 +3443,7 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
/* fan4 and fan5 share some pins with the GPIO and serial flash */
if (data->kind == nct6775) {
- cr2c = superio_inb(sioreg, 0x2c);
+ int cr2c = superio_inb(sioreg, 0x2c);
fan3pin = cr2c & BIT(6);
pwm3pin = cr2c & BIT(7);
@@ -3493,17 +3491,20 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
fan4min = fan4pin;
pwm3pin = fan3pin;
} else if (data->kind == nct6106) {
- cr24 = superio_inb(sioreg, 0x24);
+ int cr24 = superio_inb(sioreg, 0x24);
+
fan3pin = !(cr24 & 0x80);
pwm3pin = cr24 & 0x08;
} else {
/* NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D */
- int cr1b, cr2a, cr2f;
- int cr1c;
- int cr2d;
- bool dsw_en;
-
- cr1c = superio_inb(sioreg, 0x1c);
+ int cr1b = superio_inb(sioreg, 0x1b);
+ int cr1c = superio_inb(sioreg, 0x1c);
+ int cr1d = superio_inb(sioreg, 0x1d);
+ int cr2a = superio_inb(sioreg, 0x2a);
+ int cr2b = superio_inb(sioreg, 0x2b);
+ int cr2d = superio_inb(sioreg, 0x2d);
+ int cr2f = superio_inb(sioreg, 0x2f);
+ bool dsw_en = cr2f & BIT(3);
fan3pin = !(cr1c & BIT(5));
fan4pin = !(cr1c & BIT(6));
@@ -3513,7 +3514,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
pwm4pin = !(cr1c & BIT(1));
pwm5pin = !(cr1c & BIT(2));
- cr2d = superio_inb(sioreg, 0x2d);
switch (data->kind) {
case nct6791:
case nct6792:
@@ -3523,11 +3523,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
case nct6793:
case nct6795:
case nct6796:
- cr1b = superio_inb(sioreg, 0x1b);
- cr2a = superio_inb(sioreg, 0x2a);
- cr2f = superio_inb(sioreg, 0x2f);
- dsw_en = cr2f & BIT(3);
-
if (!pwm5pin)
pwm5pin = cr2d & BIT(7);
@@ -3566,9 +3561,6 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
}
if (data->kind == nct6796) {
- int cr1d = superio_inb(sioreg, 0x1d);
- int cr2b = superio_inb(sioreg, 0x2b);
-
fan7pin = !(cr2b & BIT(2));
pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
}
--
2.7.4
next prev parent reply other threads:[~2018-09-20 19:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-20 13:45 [PATCH 01/13] hwmon: (nct6775) Rename configuration register variables Guenter Roeck
2018-09-20 13:45 ` [PATCH 02/13] hwmon: (nct6775) Replace 'regval' with variables named after config registers Guenter Roeck
2018-09-20 13:45 ` Guenter Roeck [this message]
2018-09-20 13:45 ` [PATCH 04/13] hwmon: (nct6775) Declare and initialize LDN specific config variables earlier Guenter Roeck
2018-09-20 13:45 ` [PATCH 05/13] hwmon: (nct6775) Use logical or instead of if statements where possible Guenter Roeck
2018-09-20 13:45 ` [PATCH 06/13] hwmon: (nct6775) Improve instruction grouping Guenter Roeck
2018-09-20 13:45 ` [PATCH 07/13] hwmon: (nct6775) Fix fan6/pwm6 detection for NCT6792D Guenter Roeck
2018-09-20 13:45 ` [PATCH 08/13] hwmon: (nct6775) Separate fan/pwm configuration detection for NCT6793D Guenter Roeck
2018-09-20 13:45 ` [PATCH 09/13] hwmon: (nct6775) Separate fan/pwm configuration detection for NCT6795D Guenter Roeck
2018-09-20 13:45 ` [PATCH 10/13] hwmon: (nct6796) Clean up and amend fan/pwm configuration for NCT6796D Guenter Roeck
2018-09-20 13:45 ` [PATCH 11/13] hwmon: (nct6775) Fix names of DIMM temperature sources Guenter Roeck
2018-09-20 13:45 ` [PATCH 12/13] hwmon: (nct6775) Add support for NCT6797D Guenter Roeck
2018-09-20 13:45 ` [PATCH 13/13] hwmon: (nct6775) Add support for NCT6798D Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1537451141-27242-3-git-send-email-linux@roeck-us.net \
--to=linux@roeck-us.net \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).