On Wed, Jun 12, 2019 at 07:58:24AM -0700, Guenter Roeck wrote:
>Not every chip supported by this driver supports setting the number
>of samples for power averaging. Also, the power monitoring register
>is not always a 16-bit register, and the configuration bits used for
>voltage sampling are different depending on the register width.
>Some conditional code is needed to fix the problem.
>
>On top of all that, the compiler complains about problems with
>FIELD_GET and FIELD_PREP macros if the file is built with W=1.
>Avoid using those macros to silence the warning.
>
>Cc: Krzysztof Adamski <krzysztof.adamski@nokia.com>
>Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
>Signed-off-by: Guenter Roeck <linux@roeck-us.net>
>---
> drivers/hwmon/pmbus/adm1275.c | 84 +++++++++++++++++++++++++++++++++----------
> 1 file changed, 66 insertions(+), 18 deletions(-)
>
>diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
>index a477ce0474bb..b23c2dd95893 100644
>--- a/drivers/hwmon/pmbus/adm1275.c
>+++ b/drivers/hwmon/pmbus/adm1275.c
>@@ -71,9 +71,17 @@ enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
> #define ADM1075_VAUX_OV_WARN BIT(7)
> #define ADM1075_VAUX_UV_WARN BIT(6)
>
>-#define ADM1275_PWR_AVG_MASK GENMASK(13, 11)
>-#define ADM1275_VI_AVG_MASK GENMASK(10, 8)
>-#define ADM1275_SAMPLES_AVG_MAX 128
>+#define ADM1275_VI_AVG_SHIFT 0
>+#define ADM1275_VI_AVG_MASK GENMASK(ADM1275_VI_AVG_SHIFT + 2, \
>+ ADM1275_VI_AVG_SHIFT)
>+#define ADM1275_SAMPLES_AVG_MAX 128
>+
>+#define ADM1278_PRW_AVG_SHIFT 11
>+#define ADM1278_PWR_AVG_MASK GENMASK(ADM1278_PRW_AVG_SHIFT + 2, \
>+ ADM1278_PRW_AVG_SHIFT)
s/PRW/PWR/
>+#define ADM1278_VI_AVG_SHIFT 8
>+#define ADM1278_VI_AVG_MASK GENMASK(ADM1278_VI_AVG_SHIFT + 2, \
>+ ADM1278_VI_AVG_SHIFT)
>
> struct adm1275_data {
> int id;
>@@ -86,6 +94,7 @@ struct adm1275_data {
> bool have_pin_min;
> bool have_pin_max;
> bool have_temp_max;
>+ bool have_power_sampling;
> struct pmbus_driver_info info;
> };
>
>@@ -161,28 +170,60 @@ static const struct coefficients adm1293_coefficients[] = {
> [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */
> };
>
>-static inline int adm1275_read_pmon_config(struct i2c_client *client, u16 mask)
>+static inline int adm1275_read_pmon_config(const struct adm1275_data *data,
This function does not have to be inline anymore. It had to be inline
before because of FIELD_GET but this is not used anymore.
>+ struct i2c_client *client,
>+ bool is_power)
> {
>- int ret;
>-
>- ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
>+ int shift, ret;
>+ u16 mask;
>+
>+ /*
>+ * The PMON configuration register is a 16-bit register only on chips
>+ * supporting power average sampling. On other chips it is an 8-bit
>+ * register.
>+ */
>+ if (data->have_power_sampling) {
>+ ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
>+ mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
>+ shift = is_power ? ADM1278_PRW_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
>+ } else {
>+ ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
>+ mask = ADM1275_VI_AVG_MASK;
>+ shift = ADM1275_VI_AVG_SHIFT;
>+ }
> if (ret < 0)
> return ret;
>
>- return FIELD_GET(mask, (u16)ret);
>+ return (ret & mask) >> shift;
> }
>
>-static inline int adm1275_write_pmon_config(struct i2c_client *client, u16 mask,
>+static inline int adm1275_write_pmon_config(const struct adm1275_data *data,
>+ struct i2c_client *client,
>+ bool is_power,
> u16 word)
Same comment about inline here.
> {
>- int ret;
>-
>- ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
>+ int shift, ret;
>+ u16 mask;
>+
>+ if (data->have_power_sampling) {
>+ ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
>+ mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
>+ shift = is_power ? ADM1278_PRW_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
>+ } else {
>+ ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
>+ mask = ADM1275_VI_AVG_MASK;
>+ shift = ADM1275_VI_AVG_SHIFT;
>+ }
> if (ret < 0)
> return ret;
>
>- word = FIELD_PREP(mask, word) | (ret & ~mask);
>- ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, word);
>+ word = (ret & ~mask) | ((word << shift) & mask);
>+ if (data->have_power_sampling)
>+ ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG,
>+ word);
>+ else
>+ ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG,
>+ word);
>
> return ret;
> }
>@@ -266,14 +307,16 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
> return -ENXIO;
> break;
> case PMBUS_VIRT_POWER_SAMPLES:
>- ret = adm1275_read_pmon_config(client, ADM1275_PWR_AVG_MASK);
>+ if (!data->have_power_sampling)
>+ return -ENXIO;
>+ ret = adm1275_read_pmon_config(data, client, true);
> if (ret < 0)
> break;
> ret = BIT(ret);
> break;
> case PMBUS_VIRT_IN_SAMPLES:
> case PMBUS_VIRT_CURR_SAMPLES:
>- ret = adm1275_read_pmon_config(client, ADM1275_VI_AVG_MASK);
>+ ret = adm1275_read_pmon_config(data, client, false);
> if (ret < 0)
> break;
> ret = BIT(ret);
>@@ -323,14 +366,16 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
> ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
> break;
> case PMBUS_VIRT_POWER_SAMPLES:
>+ if (!data->have_power_sampling)
>+ return -ENXIO;
> word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
>- ret = adm1275_write_pmon_config(client, ADM1275_PWR_AVG_MASK,
>+ ret = adm1275_write_pmon_config(data, client, true,
> ilog2(word));
> break;
> case PMBUS_VIRT_IN_SAMPLES:
> case PMBUS_VIRT_CURR_SAMPLES:
> word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
>- ret = adm1275_write_pmon_config(client, ADM1275_VI_AVG_MASK,
>+ ret = adm1275_write_pmon_config(data, client, false,
> ilog2(word));
> break;
> default:
>@@ -528,6 +573,7 @@ static int adm1275_probe(struct i2c_client *client,
> data->have_vout = true;
> data->have_pin_max = true;
> data->have_temp_max = true;
>+ data->have_power_sampling = true;
>
> coefficients = adm1272_coefficients;
> vindex = (config & ADM1275_VRANGE) ? 1 : 0;
>@@ -613,6 +659,7 @@ static int adm1275_probe(struct i2c_client *client,
> data->have_vout = true;
> data->have_pin_max = true;
> data->have_temp_max = true;
>+ data->have_power_sampling = true;
>
> coefficients = adm1278_coefficients;
> vindex = 0;
>@@ -648,6 +695,7 @@ static int adm1275_probe(struct i2c_client *client,
> data->have_pin_min = true;
> data->have_pin_max = true;
> data->have_mfr_vaux_status = true;
>+ data->have_power_sampling = true;
>
> coefficients = adm1293_coefficients;
>
>--
>2.7.4
>