From: Peter Rosin <peda@axentia.se>
To: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Peter Rosin <peda@axentia.se>, Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
"linux-hwmon@vger.kernel.org" <linux-hwmon@vger.kernel.org>
Subject: [PATCH 1/2] hwmon: (ntc_thermistor) sort thermistor id lists alphabetically
Date: Wed, 21 Nov 2018 16:03:39 +0000 [thread overview]
Message-ID: <20181121160327.16772-2-peda@axentia.se> (raw)
In-Reply-To: <20181121160327.16772-1-peda@axentia.se>
Use an enum to index the array, so that it is possible to add sorted
entries without causing churn.
Signed-off-by: Peter Rosin <peda@axentia.se>
---
drivers/hwmon/ntc_thermistor.c | 82 +++++++++++++++++++++++++-----------------
1 file changed, 49 insertions(+), 33 deletions(-)
diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
index e0c6b2f244a6..7747c1ed1f02 100644
--- a/drivers/hwmon/ntc_thermistor.c
+++ b/drivers/hwmon/ntc_thermistor.c
@@ -45,18 +45,34 @@ struct ntc_compensation {
unsigned int ohm;
};
-/* Order matters, ntc_match references the entries by index */
+/*
+ * Used as index in a zero-terminated array, holes not allowed so
+ * that NTC_LAST is the first empty array entry.
+ */
+enum {
+ NTC_B57330V2103,
+ NTC_B57891S0103,
+ NTC_NCP03WB473,
+ NTC_NCP03WF104,
+ NTC_NCP15WB473,
+ NTC_NCP15WL333,
+ NTC_NCP15XH103,
+ NTC_NCP18WB473,
+ NTC_NCP21WB473,
+ NTC_LAST,
+};
+
static const struct platform_device_id ntc_thermistor_id[] = {
- { "ncp15wb473", TYPE_NCPXXWB473 },
- { "ncp18wb473", TYPE_NCPXXWB473 },
- { "ncp21wb473", TYPE_NCPXXWB473 },
- { "ncp03wb473", TYPE_NCPXXWB473 },
- { "ncp15wl333", TYPE_NCPXXWL333 },
- { "b57330v2103", TYPE_B57330V2103},
- { "ncp03wf104", TYPE_NCPXXWF104 },
- { "ncp15xh103", TYPE_NCPXXXH103 },
- { "b57891s0103", TYPE_B57891S0103 },
- { },
+ [NTC_B57330V2103] = { "b57330v2103", TYPE_B57330V2103 },
+ [NTC_B57891S0103] = { "b57891s0103", TYPE_B57891S0103 },
+ [NTC_NCP03WB473] = { "ncp03wb473", TYPE_NCPXXWB473 },
+ [NTC_NCP03WF104] = { "ncp03wf104", TYPE_NCPXXWF104 },
+ [NTC_NCP15WB473] = { "ncp15wb473", TYPE_NCPXXWB473 },
+ [NTC_NCP15WL333] = { "ncp15wl333", TYPE_NCPXXWL333 },
+ [NTC_NCP15XH103] = { "ncp15xh103", TYPE_NCPXXXH103 },
+ [NTC_NCP18WB473] = { "ncp18wb473", TYPE_NCPXXWB473 },
+ [NTC_NCP21WB473] = { "ncp21wb473", TYPE_NCPXXWB473 },
+ [NTC_LAST] = { },
};
/*
@@ -327,36 +343,36 @@ static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
}
static const struct of_device_id ntc_match[] = {
- { .compatible = "murata,ncp15wb473",
- .data = &ntc_thermistor_id[0] },
- { .compatible = "murata,ncp18wb473",
- .data = &ntc_thermistor_id[1] },
- { .compatible = "murata,ncp21wb473",
- .data = &ntc_thermistor_id[2] },
- { .compatible = "murata,ncp03wb473",
- .data = &ntc_thermistor_id[3] },
- { .compatible = "murata,ncp15wl333",
- .data = &ntc_thermistor_id[4] },
{ .compatible = "epcos,b57330v2103",
- .data = &ntc_thermistor_id[5]},
+ .data = &ntc_thermistor_id[NTC_B57330V2103]},
+ { .compatible = "epcos,b57891s0103",
+ .data = &ntc_thermistor_id[NTC_B57891S0103] },
+ { .compatible = "murata,ncp03wb473",
+ .data = &ntc_thermistor_id[NTC_NCP03WB473] },
{ .compatible = "murata,ncp03wf104",
- .data = &ntc_thermistor_id[6] },
+ .data = &ntc_thermistor_id[NTC_NCP03WF104] },
+ { .compatible = "murata,ncp15wb473",
+ .data = &ntc_thermistor_id[NTC_NCP15WB473] },
+ { .compatible = "murata,ncp15wl333",
+ .data = &ntc_thermistor_id[NTC_NCP15WL333] },
{ .compatible = "murata,ncp15xh103",
- .data = &ntc_thermistor_id[7] },
- { .compatible = "epcos,b57891s0103",
- .data = &ntc_thermistor_id[8] },
+ .data = &ntc_thermistor_id[NTC_NCP15XH103] },
+ { .compatible = "murata,ncp18wb473",
+ .data = &ntc_thermistor_id[NTC_NCP18WB473] },
+ { .compatible = "murata,ncp21wb473",
+ .data = &ntc_thermistor_id[NTC_NCP21WB473] },
/* Usage of vendor name "ntc" is deprecated */
+ { .compatible = "ntc,ncp03wb473",
+ .data = &ntc_thermistor_id[NTC_NCP03WB473] },
{ .compatible = "ntc,ncp15wb473",
- .data = &ntc_thermistor_id[0] },
+ .data = &ntc_thermistor_id[NTC_NCP15WB473] },
+ { .compatible = "ntc,ncp15wl333",
+ .data = &ntc_thermistor_id[NTC_NCP15WL333] },
{ .compatible = "ntc,ncp18wb473",
- .data = &ntc_thermistor_id[1] },
+ .data = &ntc_thermistor_id[NTC_NCP18WB473] },
{ .compatible = "ntc,ncp21wb473",
- .data = &ntc_thermistor_id[2] },
- { .compatible = "ntc,ncp03wb473",
- .data = &ntc_thermistor_id[3] },
- { .compatible = "ntc,ncp15wl333",
- .data = &ntc_thermistor_id[4] },
+ .data = &ntc_thermistor_id[NTC_NCP21WB473] },
{ },
};
MODULE_DEVICE_TABLE(of, ntc_match);
--
2.11.0
next prev parent reply other threads:[~2018-11-22 2:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-17 12:12 [PATCH 1/2] dt-bindings: hwmon: add B57891S0103 thermistor from Epcos Peter Rosin
2018-11-17 12:13 ` [PATCH 2/2] hwmon: (ntc_thermistor): add support for B57891S0103 " Peter Rosin
2018-11-19 17:07 ` Guenter Roeck
2018-11-19 21:16 ` Peter Rosin
2018-11-19 21:28 ` Guenter Roeck
2018-11-21 6:06 ` Peter Rosin
2018-11-21 8:42 ` Guenter Roeck
2018-11-21 16:03 ` [PATCH 0/2] hwmon: (ntc_thermistor) sort thermistors Peter Rosin
2018-11-21 16:03 ` Peter Rosin [this message]
2018-12-01 18:39 ` [PATCH 1/2] hwmon: (ntc_thermistor) sort thermistor id lists alphabetically Guenter Roeck
2018-11-21 16:03 ` [PATCH 2/2] hwmon: (ntc_thermistor) use a table to lookup the thermistor type Peter Rosin
2018-12-01 18:40 ` Guenter Roeck
2018-12-01 18:38 ` [PATCH 2/2] hwmon: (ntc_thermistor): add support for B57891S0103 from Epcos Guenter Roeck
2018-12-01 18:37 ` [PATCH 1/2] dt-bindings: hwmon: add B57891S0103 thermistor " Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181121160327.16772-2-peda@axentia.se \
--to=peda@axentia.se \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).