linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michele Sorcinelli <michelesr@autistici.org>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-hwmon@vger.kernel.org,
	Michele Sorcinelli <michelesr@autistici.org>
Subject: [PATCH] dell-smm-hwmon.c: Add XPS 9570 to supported devices list
Date: Fri, 30 Nov 2018 15:44:08 +0000	[thread overview]
Message-ID: <20181130154408.6525-1-michelesr@autistici.org> (raw)

Reviewed by: Pali Rohár <pali.rohar@gmail.com>

Allow the module to be loaded on Dell XPS 9570, without having to use
the "force=1" option. The module loads without problems, and reports
correct values:

    $ time cat /proc/i8k
    1.0 1.5 -1 35 0 0 0 0 -1 -22
    cat /proc/i8k  0.00s user 0.00s system 7% cpu 0.033 total

However, the call may freeze the kernel for a very small time due to
code running in the SSM layer. This is a known issue with the driver, and
can be reproduced with other supported models. Average execution
time is 33 ms.

The command line tools from i8kutils can properly set the fan speed,
although the firmware will override it, unless automatic fan
control is disabled with the proper SSM call.

Average fans speed (when firwmare automatic control is off):

STATE -> RPM
0 0 -> 0 0
1 1 -> 2500 2500
2 2 -> 5100 5100
3 3 -> same as 2 2

The SSM procedures I8K_SMM_GET_FAN_TYPE and I8K_SMM_GET_TEMP_TYPE are
failing to return valid values to the module, that can't label the fans
and initialize the temperature sensors in the hwmon interface.

This is a problem in the firmware code, and may be eventually addressed
by a new firmware version.

    $ sensors dell_smm-virtual-0
    dell_smm-virtual-0
    Adapter: Virtual device
    fan1:        2531 RPM
    fan2:        2496 RPM

However, the procedures I8K_SMM_GET_FAN and I8K_SMM_GET_TEMP are working
properly, as they return correct values. This means that the module
could be modified to initialize the sensors without labels and report
correct temperatures.
---
 drivers/hwmon/dell-smm-hwmon.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 9d3ef879d..367a8a617 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1017,6 +1017,13 @@ static const struct dmi_system_id i8k_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9560"),
 		},
 	},
+	{
+		.ident = "Dell XPS 15 9570",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 15 9570"),
+		},
+	},
 	{ }
 };
 
-- 
2.19.2

             reply	other threads:[~2018-11-30 15:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-30 15:44 Michele Sorcinelli [this message]
2018-11-30 15:49 ` [PATCH] dell-smm-hwmon.c: Add XPS 9570 to supported devices list Guenter Roeck
2018-11-30 18:17   ` Michele Sorcinelli
2018-11-30 18:42     ` Michele Sorcinelli
2018-12-01 18:31       ` Guenter Roeck
  -- strict thread matches above, loose matches on Subject: below --
2018-11-27 23:06 Michele Sorcinelli
2018-11-28  8:14 ` Pali Rohár
2018-11-28 12:30 ` Michele Sorcinelli
2018-11-28 12:56   ` Pali Rohár
2018-11-28 13:01     ` Michele Sorcinelli
2018-11-28 23:23       ` Michele Sorcinelli
2018-11-29  9:48         ` Pali Rohár
2018-11-29 21:42           ` Michele Sorcinelli
2018-12-05  9:15             ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181130154408.6525-1-michelesr@autistici.org \
    --to=michelesr@autistici.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=pali.rohar@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).