linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] hwmon: fix typo build -> built
@ 2018-11-29 20:09 Corentin Labbe
  2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
  2018-12-01 18:32 ` [PATCH 1/2] hwmon: fix typo build -> built Guenter Roeck
  0 siblings, 2 replies; 6+ messages in thread
From: Corentin Labbe @ 2018-11-29 20:09 UTC (permalink / raw)
  To: jdelvare, linux; +Cc: linux-hwmon, linux-kernel, Corentin Labbe

This patch fix a typo where build is used instead of built.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/hwmon/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 532a0532d01b..100b7fce1412 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -179,7 +179,7 @@ config SENSORS_ADT7X10
 	  This module contains common code shared by the ADT7310/ADT7320 and
 	  ADT7410/ADT7420 temperature monitoring chip drivers.
 
-	  If build as a module, the module will be called adt7x10.
+	  If built as a module, the module will be called adt7x10.
 
 config SENSORS_ADT7310
 	tristate "Analog Devices ADT7310/ADT7320"
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
 	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 	  chips.
 
-	  This driver can also be build as a module.  If so, the module
+	  This driver can also be built as a module.  If so, the module
 	  will be called adt7475.
 
 config SENSORS_ASC7621
@@ -666,7 +666,7 @@ config SENSORS_JZ4740
 	  If you say yes here you get support for reading adc values from the ADCIN
 	  pin on Ingenic JZ4740 SoC based boards.
 
-	  This driver can also be build as a module. If so, the module will be
+	  This driver can also be built as a module. If so, the module will be
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
 	  If you say yes here you get support for the Texas Instruments
 	  AMC6821 hardware monitoring chips.
 
-	  This driver can also be build as a module.  If so, the module
+	  This driver can also be built as a module.  If so, the module
 	  will be called amc6821.
 
 config SENSORS_INA209
-- 
2.18.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH 2/2] hwmon: Remove multiple space after dot
  2018-11-29 20:09 [PATCH 1/2] hwmon: fix typo build -> built Corentin Labbe
@ 2018-11-29 20:09 ` Corentin Labbe
  2018-12-01 18:34   ` Guenter Roeck
  2018-12-01 20:27   ` Joe Perches
  2018-12-01 18:32 ` [PATCH 1/2] hwmon: fix typo build -> built Guenter Roeck
  1 sibling, 2 replies; 6+ messages in thread
From: Corentin Labbe @ 2018-11-29 20:09 UTC (permalink / raw)
  To: jdelvare, linux; +Cc: linux-hwmon, linux-kernel, Corentin Labbe

This patch remove extra space after a dot.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
 1 file changed, 118 insertions(+), 118 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 100b7fce1412..3ed91b21f368 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -11,7 +11,7 @@ menuconfig HWMON
 	  of a system. Most modern motherboards include such a device. It
 	  can include temperature sensors, voltage sensors, fan speed
 	  sensors and various additional features such as the ability to
-	  control the speed of the fans.  If you want this support you
+	  control the speed of the fans. If you want this support you
 	  should say Y here and also to the specific driver(s) for your
 	  sensors chip(s) below.
 
@@ -19,7 +19,7 @@ menuconfig HWMON
 	  sensors-detect script from the lm_sensors package.  Read
 	  <file:Documentation/hwmon/userspace-tools> for details.
 
-	  This support can also be built as a module.  If so, the module
+	  This support can also be built as a module. If so, the module
 	  will be called hwmon.
 
 if HWMON
@@ -46,7 +46,7 @@ config SENSORS_AB8500
 	  AB8500 die and two GPADC channels. The GPADC channel are preferably
 	  used to access sensors outside the AB8500 chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called abx500-temp.
 
 config SENSORS_ABITUGURU
@@ -61,7 +61,7 @@ config SENSORS_ABITUGURU
 	  of which motherboards have which revision see
 	  Documentation/hwmon/abituguru
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called abituguru.
 
 config SENSORS_ABITUGURU3
@@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3
 	  2005). For more info and a list of which motherboards have which
 	  revision see Documentation/hwmon/abituguru3
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called abituguru3.
 
 config SENSORS_AD7314
@@ -116,7 +116,7 @@ config SENSORS_ADM1021
 	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 	  Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm1021.
 
 config SENSORS_ADM1025
@@ -127,7 +127,7 @@ config SENSORS_ADM1025
 	  If you say yes here you get support for Analog Devices ADM1025
 	  and Philips NE1619 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm1025.
 
 config SENSORS_ADM1026
@@ -138,7 +138,7 @@ config SENSORS_ADM1026
 	  If you say yes here you get support for Analog Devices ADM1026
 	  sensor chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm1026.
 
 config SENSORS_ADM1029
@@ -149,7 +149,7 @@ config SENSORS_ADM1029
 	  sensor chip.
 	  Very rare chip, please let us know you use it.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm1029.
 
 config SENSORS_ADM1031
@@ -159,7 +159,7 @@ config SENSORS_ADM1031
 	  If you say yes here you get support for Analog Devices ADM1031
 	  and ADM1030 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm1031.
 
 config SENSORS_ADM9240
@@ -170,7 +170,7 @@ config SENSORS_ADM9240
 	  If you say yes here you get support for Analog Devices ADM9240,
 	  Dallas DS1780, National Semiconductor LM81 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adm9240.
 
 config SENSORS_ADT7X10
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
 	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 	  chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adt7475.
 
 config SENSORS_ASC7621
@@ -255,7 +255,7 @@ config SENSORS_ASC7621
 	  aSC7621
 	  aSC7621a
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called asc7621.
 
 config SENSORS_K8TEMP
@@ -267,7 +267,7 @@ config SENSORS_K8TEMP
 	  microarchitecture. Please note that you will need at least
 	  lm-sensors 2.10.1 for proper userspace support.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
@@ -280,7 +280,7 @@ config SENSORS_K10TEMP
 	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
 	  and 16h (Kabini/Mullins) microarchitectures.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called k10temp.
 
 config SENSORS_FAM15H_POWER
@@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER
 	  If you say yes here you get support for processor power
 	  information of your AMD family 15h CPU.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called fam15h_power.
 
 config SENSORS_APPLESMC
@@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI
 	  and power sensors available on SCMI based platforms. The actual
 	  number and type of sensors exported depend on the platform.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called scmi-hwmon.
 
 config SENSORS_ARM_SCPI
@@ -346,7 +346,7 @@ config SENSORS_ASB100
 	  If you say yes here you get support for the ASB100 Bach sensor
 	  chip found on some Asus mainboards.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called asb100.
 
 config SENSORS_ASPEED
@@ -371,7 +371,7 @@ config SENSORS_ATXP1
 	  If your board have such a chip, you are able to control your CPU
 	  core and other voltages.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called atxp1.
 
 config SENSORS_DS620
@@ -381,7 +381,7 @@ config SENSORS_DS620
 	  If you say yes here you get support for Dallas Semiconductor
 	  DS620 sensor chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ds620.
 
 config SENSORS_DS1621
@@ -396,7 +396,7 @@ config SENSORS_DS1621
 	  - Maxim Integrated DS1721
 	  - Maxim Integrated DS1731
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ds1621.
 
 config SENSORS_DELL_SMM
@@ -427,7 +427,7 @@ config SENSORS_DA9055
 	  If you say yes here you get support for ADC on the Dialog
 	  Semiconductor DA9055 PMIC.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called da9055-hwmon.
 
 config SENSORS_I5K_AMB
@@ -448,7 +448,7 @@ config SENSORS_F71805F
 	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 	  Super-I/O chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called f71805f.
 
 config SENSORS_F71882FG
@@ -470,7 +470,7 @@ config SENSORS_F71882FG
 	    F81801U
 	    F81865F
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called f71882fg.
 
 config SENSORS_F75375S
@@ -480,7 +480,7 @@ config SENSORS_F75375S
 	  If you say yes here you get support for hardware monitoring
 	  features of the Fintek F75375S/SP, F75373 and F75387
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called f75375s.
 
 config SENSORS_MC13783_ADC
@@ -502,7 +502,7 @@ config SENSORS_FSCHMD
 	  fscscy and fscher drivers and adding support for several other FSC
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called fschmd.
 
 config SENSORS_FTSTEUTATES
@@ -524,7 +524,7 @@ config SENSORS_GL518SM
 	  If you say yes here you get support for Genesys Logic GL518SM
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called gl518sm.
 
 config SENSORS_GL520SM
@@ -535,7 +535,7 @@ config SENSORS_GL520SM
 	  If you say yes here you get support for Genesys Logic GL520SM
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called gl520sm.
 
 config SENSORS_G760A
@@ -545,7 +545,7 @@ config SENSORS_G760A
 	  If you say yes here you get support for Global Mixed-mode
 	  Technology Inc G760A fan speed PWM controller chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called g760a.
 
 config SENSORS_G762
@@ -555,7 +555,7 @@ config SENSORS_G762
 	  If you say yes here you get support for Global Mixed-mode
 	  Technology Inc G762 and G763 fan speed PWM controller chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called g762.
 
 config SENSORS_GPIO_FAN
@@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN
 	help
 	  If you say yes here you get support for fans connected to GPIO lines.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called gpio-fan.
 
 config SENSORS_HIH6130
@@ -576,7 +576,7 @@ config SENSORS_HIH6130
 	  If you say yes here you get support for Honeywell Humidicon
 	  HIH-6130 and HIH-6131 Humidicon humidity sensors.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called hih6130.
 
 config SENSORS_IBMAEM
@@ -590,7 +590,7 @@ config SENSORS_IBMAEM
 	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 	  and certain HC10/HS2x/LS2x/QS2x blades.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ibmaem.
 
 config SENSORS_IBMPEX
@@ -604,7 +604,7 @@ config SENSORS_IBMPEX
 	  x3655, and x3755; the x3800, x3850, and x3950 models that have
 	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ibmpex.
 
 config SENSORS_IBMPOWERNV
@@ -656,7 +656,7 @@ config SENSORS_IT87
 	  IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
 	  clone.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called it87.
 
 config SENSORS_JZ4740
@@ -680,7 +680,7 @@ config SENSORS_JC42
 	  MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
 	  STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called jc42.
 
 config SENSORS_POWR1220
@@ -691,7 +691,7 @@ config SENSORS_POWR1220
 	  functions of the Lattice POWR1220 isp Power Supply Monitoring,
 	  Sequencing and Margining Controller.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called powr1220.
 
 config SENSORS_LINEAGE
@@ -702,7 +702,7 @@ config SENSORS_LINEAGE
 	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 	  CP2000DC, CP2725, and others.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lineage-pem.
 
 config SENSORS_LTC2945
@@ -803,7 +803,7 @@ config SENSORS_MAX1111
 	  Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 	  ADC chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max1111.
 
 config SENSORS_MAX16065
@@ -819,7 +819,7 @@ config SENSORS_MAX16065
 	    MAX16070
 	    MAX16071
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max16065.
 
 config SENSORS_MAX1619
@@ -828,7 +828,7 @@ config SENSORS_MAX1619
 	help
 	  If you say yes here you get support for MAX1619 sensor chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max1619.
 
 config SENSORS_MAX1668
@@ -838,7 +838,7 @@ config SENSORS_MAX1668
 	  If you say yes here you get support for MAX1668, MAX1989 and
 	  MAX1805 chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max1668.
 
 config SENSORS_MAX197
@@ -881,7 +881,7 @@ config SENSORS_MAX6639
 	  If you say yes here you get support for the MAX6639
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max6639.
 
 config SENSORS_MAX6642
@@ -892,7 +892,7 @@ config SENSORS_MAX6642
 	  MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 	  with Overtemperature Alarm from Maxim.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max6642.
 
 config SENSORS_MAX6650
@@ -902,7 +902,7 @@ config SENSORS_MAX6650
 	  If you say yes here you get support for the MAX6650 / MAX6651
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max6650.
 
 config SENSORS_MAX6697
@@ -913,7 +913,7 @@ config SENSORS_MAX6697
 	  MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 	  temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max6697.
 
 config SENSORS_MAX31790
@@ -923,7 +923,7 @@ config SENSORS_MAX31790
 	  If you say yes here you get support for 6-Channel PWM-Output
 	  Fan RPM Controller.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called max31790.
 
 config SENSORS_MCP3021
@@ -934,7 +934,7 @@ config SENSORS_MCP3021
 	  The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 	  with 12-bit resolution.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called mcp3021.
 
 config SENSORS_MLXREG_FAN
@@ -957,7 +957,7 @@ config SENSORS_TC654
 	  The TC654 and TC655 are PWM mode fan speed controllers with
 	  FanSense technology for use with brushless DC fans.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tc654.
 
 config SENSORS_MENF21BMC_HWMON
@@ -983,7 +983,7 @@ config SENSORS_ADCXX
 
 	  Examples : ADC081S101, ADC124S501, ...
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called adcxx.
 
 config SENSORS_LM63
@@ -996,7 +996,7 @@ config SENSORS_LM63
 	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 	  others.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm63.
 
 config SENSORS_LM70
@@ -1007,7 +1007,7 @@ config SENSORS_LM70
 	  LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 	  ture sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm70.
 
 config SENSORS_LM73
@@ -1016,7 +1016,7 @@ config SENSORS_LM73
 	help
 	  If you say yes here you get support for National Semiconductor LM73
 	  sensor chips.
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm73.
 
 config SENSORS_LM75
@@ -1046,7 +1046,7 @@ config SENSORS_LM75
 	  that with some chips which don't replicate LM75 quirks exactly,
 	  you may need the "force" module parameter.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm75.
 
 config SENSORS_LM77
@@ -1056,7 +1056,7 @@ config SENSORS_LM77
 	  If you say yes here you get support for National Semiconductor LM77
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm77.
 
 config SENSORS_LM78
@@ -1067,7 +1067,7 @@ config SENSORS_LM78
 	  If you say yes here you get support for National Semiconductor LM78,
 	  LM78-J and LM79.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm78.
 
 config SENSORS_LM80
@@ -1077,7 +1077,7 @@ config SENSORS_LM80
 	  If you say yes here you get support for National Semiconductor
 	  LM80 and LM96080 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm80.
 
 config SENSORS_LM83
@@ -1087,7 +1087,7 @@ config SENSORS_LM83
 	  If you say yes here you get support for National Semiconductor
 	  LM82 and LM83 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm83.
 
 config SENSORS_LM85
@@ -1099,7 +1099,7 @@ config SENSORS_LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 	  EMC6D101, EMC6D102, and EMC6D103.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm85.
 
 config SENSORS_LM87
@@ -1110,7 +1110,7 @@ config SENSORS_LM87
 	  If you say yes here you get support for National Semiconductor LM87
 	  and Analog Devices ADM1024 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm87.
 
 config SENSORS_LM90
@@ -1124,7 +1124,7 @@ config SENSORS_LM90
 	  Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and
 	  Texas Instruments TMP451 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm90.
 
 config SENSORS_LM92
@@ -1134,7 +1134,7 @@ config SENSORS_LM92
 	  If you say yes here you get support for National Semiconductor LM92
 	  and Maxim MAX6635 sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm92.
 
 config SENSORS_LM93
@@ -1145,7 +1145,7 @@ config SENSORS_LM93
 	  If you say yes here you get support for National Semiconductor LM93,
 	  LM94, and compatible sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm93.
 
 config SENSORS_LM95234
@@ -1155,7 +1155,7 @@ config SENSORS_LM95234
 	  If you say yes here you get support for the LM95233 and LM95234
 	  temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm95234.
 
 config SENSORS_LM95241
@@ -1165,7 +1165,7 @@ config SENSORS_LM95241
 	  If you say yes here you get support for LM95231 and LM95241 sensor
 	  chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm95241.
 
 config SENSORS_LM95245
@@ -1176,7 +1176,7 @@ config SENSORS_LM95245
 	  If you say yes here you get support for LM95235 and LM95245
 	  temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called lm95245.
 
 config SENSORS_PC87360
@@ -1190,7 +1190,7 @@ config SENSORS_PC87360
 	  control.  The PC87365 and PC87366 additionally have voltage and
 	  temperature monitoring.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called pc87360.
 
 config SENSORS_PC87427
@@ -1204,7 +1204,7 @@ config SENSORS_PC87427
 	  monitoring. Fan speed monitoring and control are supported, as
 	  well as temperature monitoring. Voltages aren't supported yet.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called pc87427.
 
 config SENSORS_NTC_THERMISTOR
@@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR
 	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
 	  NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ntc-thermistor.
 
 config SENSORS_NCT6683
@@ -1230,7 +1230,7 @@ config SENSORS_NCT6683
 	  If you say yes here you get support for the hardware monitoring
 	  functionality of the Nuvoton NCT6683D eSIO chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called nct6683.
 
 config SENSORS_NCT6775
@@ -1244,7 +1244,7 @@ config SENSORS_NCT6775
 	  Super-I/O chips. This driver replaces the w83627ehf driver for
 	  NCT6775F and NCT6776F.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called nct6775.
 
 config SENSORS_NCT7802
@@ -1255,7 +1255,7 @@ config SENSORS_NCT7802
 	  If you say yes here you get support for the Nuvoton NCT7802Y
 	  hardware monitoring chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called nct7802.
 
 config SENSORS_NCT7904
@@ -1265,7 +1265,7 @@ config SENSORS_NCT7904
 	  If you say yes here you get support for the Nuvoton NCT7904
 	  hardware monitoring chip, including manual fan speed control.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called nct7904.
 
 config SENSORS_NPCM7XX
@@ -1302,11 +1302,11 @@ config SENSORS_PCF8591
 	  If you say yes here you get support for Philips PCF8591 4-channel
 	  ADC, 1-channel DAC chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called pcf8591.
 
 	  These devices are hard to detect and rarely found on mainstream
-	  hardware.  If unsure, say N.
+	  hardware. If unsure, say N.
 
 source drivers/hwmon/pmbus/Kconfig
 
@@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN
 	  The driver uses the generic PWM interface, thus it will work on a
 	  variety of SoCs.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called pwm-fan.
 
 config SENSORS_RASPBERRYPI_HWMON
@@ -1340,7 +1340,7 @@ config SENSORS_SHT15
 	  If you say yes here you get support for the Sensiron SHT10, SHT11,
 	  SHT15, SHT71, SHT75 humidity and temperature sensors.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sht15.
 
 config SENSORS_SHT21
@@ -1350,7 +1350,7 @@ config SENSORS_SHT21
 	  If you say yes here you get support for the Sensiron SHT21, SHT25
 	  humidity and temperature sensors.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sht21.
 
 config SENSORS_SHT3x
@@ -1361,7 +1361,7 @@ config SENSORS_SHT3x
 	  If you say yes here you get support for the Sensiron SHT30 and SHT31
 	  humidity and temperature sensors.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sht3x.
 
 config SENSORS_SHTC1
@@ -1371,7 +1371,7 @@ config SENSORS_SHTC1
 	  If you say yes here you get support for the Sensiron SHTC1 and SHTW1
 	  humidity and temperature sensors.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called shtc1.
 
 config SENSORS_S3C
@@ -1398,7 +1398,7 @@ config SENSORS_SIS5595
 	  If you say yes here you get support for the integrated sensors in
 	  SiS5595 South Bridges.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sis5595.
 
 config SENSORS_DME1737
@@ -1410,7 +1410,7 @@ config SENSORS_DME1737
 	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 	  Asus A8000 Super-I/O chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called dme1737.
 
 config SENSORS_EMC1403
@@ -1431,7 +1431,7 @@ config SENSORS_EMC2103
 	  If you say yes here you get support for the temperature
 	  and fan sensors of the SMSC EMC2103 chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called emc2103.
 
 config SENSORS_EMC6W201
@@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201
 	  If you say yes here you get support for the SMSC EMC6W201
 	  hardware monitoring chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called emc6w201.
 
 config SENSORS_SMSC47M1
@@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1
 	  driver, select also "SMSC LPC47M192 and compatibles" below for
 	  those.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called smsc47m1.
 
 config SENSORS_SMSC47M192
@@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192
 	  "SMSC LPC47M10x and compatibles" above. You need both drivers
 	  if you want fan control and voltage/temperature sensor support.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called smsc47m192.
 
 config SENSORS_SMSC47B397
@@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397
 	  If you say yes here you get support for the SMSC LPC47B397-NC
 	  sensor chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called smsc47b397.
 
 config SENSORS_SCH56XX_COMMON
@@ -1501,7 +1501,7 @@ config SENSORS_SCH5627
 	  features of the SMSC SCH5627 Super-I/O chip including support for
 	  the integrated watchdog.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sch5627.
 
 config SENSORS_SCH5636
@@ -1519,7 +1519,7 @@ config SENSORS_SCH5636
 	  Theseus' hardware monitoring features including support for the
 	  integrated watchdog.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called sch5636.
 
 config SENSORS_STTS751
@@ -1529,7 +1529,7 @@ config SENSORS_STTS751
 	  If you say yes here you get support for STTS751
 	  temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called stts751.
 
 config SENSORS_SMM665
@@ -1563,7 +1563,7 @@ config SENSORS_ADS1015
 	  If you say yes here you get support for Texas Instruments
 	  ADS1015/ADS1115 12/16-bit 4-input ADC device.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ads1015.
 
 config SENSORS_ADS7828
@@ -1575,7 +1575,7 @@ config SENSORS_ADS7828
 	  ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
 	  it is 8-bit on ADS7830.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ads7828.
 
 config SENSORS_ADS7871
@@ -1584,7 +1584,7 @@ config SENSORS_ADS7871
 	help
 	  If you say yes here you get support for TI ADS7871 & ADS7870
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ads7871.
 
 config SENSORS_AMC6821
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
 	  If you say yes here you get support for the Texas Instruments
 	  AMC6821 hardware monitoring chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called amc6821.
 
 config SENSORS_INA209
@@ -1618,7 +1618,7 @@ config SENSORS_INA2XX
 	  The INA2xx driver is configured for the default configuration of
 	  the part as described in the datasheet.
 	  Default value for Rshunt is 10 mOhms.
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ina2xx.
 
 config SENSORS_INA3221
@@ -1629,7 +1629,7 @@ config SENSORS_INA3221
 	  If you say yes here you get support for  the TI INA3221 Triple Power
 	  Monitor.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called ina3221.
 
 config SENSORS_TC74
@@ -1639,7 +1639,7 @@ config SENSORS_TC74
 	  If you say yes here you get support for Microchip TC74 single
 	  input temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tc74.
 
 config SENSORS_THMC50
@@ -1649,7 +1649,7 @@ config SENSORS_THMC50
 	  If you say yes here you get support for Texas Instruments THMC50
 	  sensor chips and clones: the Analog Devices ADM1022.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called thmc50.
 
 config SENSORS_TMP102
@@ -1660,7 +1660,7 @@ config SENSORS_TMP102
 	  If you say yes here you get support for Texas Instruments TMP102
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tmp102.
 
 config SENSORS_TMP103
@@ -1671,7 +1671,7 @@ config SENSORS_TMP103
 	  If you say yes here you get support for Texas Instruments TMP103
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tmp103.
 
 config SENSORS_TMP108
@@ -1682,7 +1682,7 @@ config SENSORS_TMP108
 	  If you say yes here you get support for Texas Instruments TMP108
 	  sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tmp108.
 
 config SENSORS_TMP401
@@ -1692,7 +1692,7 @@ config SENSORS_TMP401
 	  If you say yes here you get support for Texas Instruments TMP401,
 	  TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tmp401.
 
 config SENSORS_TMP421
@@ -1702,7 +1702,7 @@ config SENSORS_TMP421
 	  If you say yes here you get support for Texas Instruments TMP421,
 	  TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called tmp421.
 
 config SENSORS_VEXPRESS
@@ -1729,7 +1729,7 @@ config SENSORS_VIA686A
 	  If you say yes here you get support for the integrated sensors in
 	  Via 686A/B South Bridges.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called via686a.
 
 config SENSORS_VT1211
@@ -1740,7 +1740,7 @@ config SENSORS_VT1211
 	  If you say yes here then you get support for hardware monitoring
 	  features of the VIA VT1211 Super-I/O chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called vt1211.
 
 config SENSORS_VT8231
@@ -1751,7 +1751,7 @@ config SENSORS_VT8231
 	  If you say yes here then you get support for the integrated sensors
 	  in the VIA VT8231 device.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called vt8231.
 
 config SENSORS_W83773G
@@ -1761,7 +1761,7 @@ config SENSORS_W83773G
 	  If you say yes here you get support for the Nuvoton W83773G hardware
 	  monitoring chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83773g.
 
 config SENSORS_W83781D
@@ -1773,7 +1773,7 @@ config SENSORS_W83781D
 	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
 	  Asus AS99127F.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83781d.
 
 config SENSORS_W83791D
@@ -1783,7 +1783,7 @@ config SENSORS_W83791D
 	help
 	  If you say yes here you get support for the Winbond W83791D chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83791d.
 
 config SENSORS_W83792D
@@ -1792,7 +1792,7 @@ config SENSORS_W83792D
 	help
 	  If you say yes here you get support for the Winbond W83792D chip.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83792d.
 
 config SENSORS_W83793
@@ -1804,7 +1804,7 @@ config SENSORS_W83793
 	  hardware monitoring chip, including support for the integrated
 	  watchdog.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83793.
 
 config SENSORS_W83795
@@ -1815,7 +1815,7 @@ config SENSORS_W83795
 	  W83795ADG hardware monitoring chip, including manual fan speed
 	  control.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83795.
 
 config SENSORS_W83795_FANCTRL
@@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS
 	  sensor chip, which is used on the Asus A7N8X, among other
 	  motherboards.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83l785ts.
 
 config SENSORS_W83L786NG
@@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG
 	  If you say yes here you get support for the Winbond W83L786NG
 	  and W83L786NR sensor chips.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83l786ng.
 
 config SENSORS_W83627HF
@@ -1864,7 +1864,7 @@ config SENSORS_W83627HF
 	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
 	  W83697HF.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83627hf.
 
 config SENSORS_W83627EHF
@@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF
 	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
 	  (also known as W83667HG-I), and NCT6776F.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called w83627ehf.
 
 config SENSORS_WM831X
@@ -1895,7 +1895,7 @@ config SENSORS_WM831X
 	  monitoring functionality of the Wolfson Microelectronics
 	  WM831x series of PMICs.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called wm831x-hwmon.
 
 config SENSORS_WM8350
@@ -1905,7 +1905,7 @@ config SENSORS_WM8350
 	  If you say yes here you get support for the hardware
 	  monitoring features of the WM835x series of PMICs.
 
-	  This driver can also be built as a module.  If so, the module
+	  This driver can also be built as a module. If so, the module
 	  will be called wm8350-hwmon.
 
 config SENSORS_ULTRA45
-- 
2.18.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/2] hwmon: fix typo build -> built
  2018-11-29 20:09 [PATCH 1/2] hwmon: fix typo build -> built Corentin Labbe
  2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
@ 2018-12-01 18:32 ` Guenter Roeck
  1 sibling, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2018-12-01 18:32 UTC (permalink / raw)
  To: Corentin Labbe; +Cc: jdelvare, linux-hwmon, linux-kernel

On Thu, Nov 29, 2018 at 08:09:14PM +0000, Corentin Labbe wrote:
> This patch fix a typo where build is used instead of built.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/Kconfig | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 532a0532d01b..100b7fce1412 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -179,7 +179,7 @@ config SENSORS_ADT7X10
>  	  This module contains common code shared by the ADT7310/ADT7320 and
>  	  ADT7410/ADT7420 temperature monitoring chip drivers.
>  
> -	  If build as a module, the module will be called adt7x10.
> +	  If built as a module, the module will be called adt7x10.
>  
>  config SENSORS_ADT7310
>  	tristate "Analog Devices ADT7310/ADT7320"
> @@ -242,7 +242,7 @@ config SENSORS_ADT7475
>  	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
>  	  chips.
>  
> -	  This driver can also be build as a module.  If so, the module
> +	  This driver can also be built as a module.  If so, the module
>  	  will be called adt7475.
>  
>  config SENSORS_ASC7621
> @@ -666,7 +666,7 @@ config SENSORS_JZ4740
>  	  If you say yes here you get support for reading adc values from the ADCIN
>  	  pin on Ingenic JZ4740 SoC based boards.
>  
> -	  This driver can also be build as a module. If so, the module will be
> +	  This driver can also be built as a module. If so, the module will be
>  	  called jz4740-hwmon.
>  
>  config SENSORS_JC42
> @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
>  	  If you say yes here you get support for the Texas Instruments
>  	  AMC6821 hardware monitoring chips.
>  
> -	  This driver can also be build as a module.  If so, the module
> +	  This driver can also be built as a module.  If so, the module
>  	  will be called amc6821.
>  
>  config SENSORS_INA209

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] hwmon: Remove multiple space after dot
  2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
@ 2018-12-01 18:34   ` Guenter Roeck
  2018-12-01 20:27   ` Joe Perches
  1 sibling, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2018-12-01 18:34 UTC (permalink / raw)
  To: Corentin Labbe; +Cc: jdelvare, linux-hwmon, linux-kernel

On Thu, Nov 29, 2018 at 08:09:15PM +0000, Corentin Labbe wrote:
> This patch remove extra space after a dot.
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>

Marginal ... I think that used to be common style a long time ago.
Nevertheless, applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
>  1 file changed, 118 insertions(+), 118 deletions(-)
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 100b7fce1412..3ed91b21f368 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -11,7 +11,7 @@ menuconfig HWMON
>  	  of a system. Most modern motherboards include such a device. It
>  	  can include temperature sensors, voltage sensors, fan speed
>  	  sensors and various additional features such as the ability to
> -	  control the speed of the fans.  If you want this support you
> +	  control the speed of the fans. If you want this support you
>  	  should say Y here and also to the specific driver(s) for your
>  	  sensors chip(s) below.
>  
> @@ -19,7 +19,7 @@ menuconfig HWMON
>  	  sensors-detect script from the lm_sensors package.  Read
>  	  <file:Documentation/hwmon/userspace-tools> for details.
>  
> -	  This support can also be built as a module.  If so, the module
> +	  This support can also be built as a module. If so, the module
>  	  will be called hwmon.
>  
>  if HWMON
> @@ -46,7 +46,7 @@ config SENSORS_AB8500
>  	  AB8500 die and two GPADC channels. The GPADC channel are preferably
>  	  used to access sensors outside the AB8500 chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called abx500-temp.
>  
>  config SENSORS_ABITUGURU
> @@ -61,7 +61,7 @@ config SENSORS_ABITUGURU
>  	  of which motherboards have which revision see
>  	  Documentation/hwmon/abituguru
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called abituguru.
>  
>  config SENSORS_ABITUGURU3
> @@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3
>  	  2005). For more info and a list of which motherboards have which
>  	  revision see Documentation/hwmon/abituguru3
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called abituguru3.
>  
>  config SENSORS_AD7314
> @@ -116,7 +116,7 @@ config SENSORS_ADM1021
>  	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
>  	  Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm1021.
>  
>  config SENSORS_ADM1025
> @@ -127,7 +127,7 @@ config SENSORS_ADM1025
>  	  If you say yes here you get support for Analog Devices ADM1025
>  	  and Philips NE1619 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm1025.
>  
>  config SENSORS_ADM1026
> @@ -138,7 +138,7 @@ config SENSORS_ADM1026
>  	  If you say yes here you get support for Analog Devices ADM1026
>  	  sensor chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm1026.
>  
>  config SENSORS_ADM1029
> @@ -149,7 +149,7 @@ config SENSORS_ADM1029
>  	  sensor chip.
>  	  Very rare chip, please let us know you use it.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm1029.
>  
>  config SENSORS_ADM1031
> @@ -159,7 +159,7 @@ config SENSORS_ADM1031
>  	  If you say yes here you get support for Analog Devices ADM1031
>  	  and ADM1030 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm1031.
>  
>  config SENSORS_ADM9240
> @@ -170,7 +170,7 @@ config SENSORS_ADM9240
>  	  If you say yes here you get support for Analog Devices ADM9240,
>  	  Dallas DS1780, National Semiconductor LM81 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adm9240.
>  
>  config SENSORS_ADT7X10
> @@ -242,7 +242,7 @@ config SENSORS_ADT7475
>  	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
>  	  chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adt7475.
>  
>  config SENSORS_ASC7621
> @@ -255,7 +255,7 @@ config SENSORS_ASC7621
>  	  aSC7621
>  	  aSC7621a
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called asc7621.
>  
>  config SENSORS_K8TEMP
> @@ -267,7 +267,7 @@ config SENSORS_K8TEMP
>  	  microarchitecture. Please note that you will need at least
>  	  lm-sensors 2.10.1 for proper userspace support.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called k8temp.
>  
>  config SENSORS_K10TEMP
> @@ -280,7 +280,7 @@ config SENSORS_K10TEMP
>  	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
>  	  and 16h (Kabini/Mullins) microarchitectures.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called k10temp.
>  
>  config SENSORS_FAM15H_POWER
> @@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER
>  	  If you say yes here you get support for processor power
>  	  information of your AMD family 15h CPU.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called fam15h_power.
>  
>  config SENSORS_APPLESMC
> @@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI
>  	  and power sensors available on SCMI based platforms. The actual
>  	  number and type of sensors exported depend on the platform.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called scmi-hwmon.
>  
>  config SENSORS_ARM_SCPI
> @@ -346,7 +346,7 @@ config SENSORS_ASB100
>  	  If you say yes here you get support for the ASB100 Bach sensor
>  	  chip found on some Asus mainboards.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called asb100.
>  
>  config SENSORS_ASPEED
> @@ -371,7 +371,7 @@ config SENSORS_ATXP1
>  	  If your board have such a chip, you are able to control your CPU
>  	  core and other voltages.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called atxp1.
>  
>  config SENSORS_DS620
> @@ -381,7 +381,7 @@ config SENSORS_DS620
>  	  If you say yes here you get support for Dallas Semiconductor
>  	  DS620 sensor chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ds620.
>  
>  config SENSORS_DS1621
> @@ -396,7 +396,7 @@ config SENSORS_DS1621
>  	  - Maxim Integrated DS1721
>  	  - Maxim Integrated DS1731
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ds1621.
>  
>  config SENSORS_DELL_SMM
> @@ -427,7 +427,7 @@ config SENSORS_DA9055
>  	  If you say yes here you get support for ADC on the Dialog
>  	  Semiconductor DA9055 PMIC.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called da9055-hwmon.
>  
>  config SENSORS_I5K_AMB
> @@ -448,7 +448,7 @@ config SENSORS_F71805F
>  	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
>  	  Super-I/O chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called f71805f.
>  
>  config SENSORS_F71882FG
> @@ -470,7 +470,7 @@ config SENSORS_F71882FG
>  	    F81801U
>  	    F81865F
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called f71882fg.
>  
>  config SENSORS_F75375S
> @@ -480,7 +480,7 @@ config SENSORS_F75375S
>  	  If you say yes here you get support for hardware monitoring
>  	  features of the Fintek F75375S/SP, F75373 and F75387
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called f75375s.
>  
>  config SENSORS_MC13783_ADC
> @@ -502,7 +502,7 @@ config SENSORS_FSCHMD
>  	  fscscy and fscher drivers and adding support for several other FSC
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called fschmd.
>  
>  config SENSORS_FTSTEUTATES
> @@ -524,7 +524,7 @@ config SENSORS_GL518SM
>  	  If you say yes here you get support for Genesys Logic GL518SM
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called gl518sm.
>  
>  config SENSORS_GL520SM
> @@ -535,7 +535,7 @@ config SENSORS_GL520SM
>  	  If you say yes here you get support for Genesys Logic GL520SM
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called gl520sm.
>  
>  config SENSORS_G760A
> @@ -545,7 +545,7 @@ config SENSORS_G760A
>  	  If you say yes here you get support for Global Mixed-mode
>  	  Technology Inc G760A fan speed PWM controller chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called g760a.
>  
>  config SENSORS_G762
> @@ -555,7 +555,7 @@ config SENSORS_G762
>  	  If you say yes here you get support for Global Mixed-mode
>  	  Technology Inc G762 and G763 fan speed PWM controller chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called g762.
>  
>  config SENSORS_GPIO_FAN
> @@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN
>  	help
>  	  If you say yes here you get support for fans connected to GPIO lines.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called gpio-fan.
>  
>  config SENSORS_HIH6130
> @@ -576,7 +576,7 @@ config SENSORS_HIH6130
>  	  If you say yes here you get support for Honeywell Humidicon
>  	  HIH-6130 and HIH-6131 Humidicon humidity sensors.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called hih6130.
>  
>  config SENSORS_IBMAEM
> @@ -590,7 +590,7 @@ config SENSORS_IBMAEM
>  	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
>  	  and certain HC10/HS2x/LS2x/QS2x blades.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ibmaem.
>  
>  config SENSORS_IBMPEX
> @@ -604,7 +604,7 @@ config SENSORS_IBMPEX
>  	  x3655, and x3755; the x3800, x3850, and x3950 models that have
>  	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ibmpex.
>  
>  config SENSORS_IBMPOWERNV
> @@ -656,7 +656,7 @@ config SENSORS_IT87
>  	  IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
>  	  clone.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called it87.
>  
>  config SENSORS_JZ4740
> @@ -680,7 +680,7 @@ config SENSORS_JC42
>  	  MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
>  	  STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called jc42.
>  
>  config SENSORS_POWR1220
> @@ -691,7 +691,7 @@ config SENSORS_POWR1220
>  	  functions of the Lattice POWR1220 isp Power Supply Monitoring,
>  	  Sequencing and Margining Controller.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called powr1220.
>  
>  config SENSORS_LINEAGE
> @@ -702,7 +702,7 @@ config SENSORS_LINEAGE
>  	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
>  	  CP2000DC, CP2725, and others.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lineage-pem.
>  
>  config SENSORS_LTC2945
> @@ -803,7 +803,7 @@ config SENSORS_MAX1111
>  	  Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
>  	  ADC chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max1111.
>  
>  config SENSORS_MAX16065
> @@ -819,7 +819,7 @@ config SENSORS_MAX16065
>  	    MAX16070
>  	    MAX16071
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max16065.
>  
>  config SENSORS_MAX1619
> @@ -828,7 +828,7 @@ config SENSORS_MAX1619
>  	help
>  	  If you say yes here you get support for MAX1619 sensor chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max1619.
>  
>  config SENSORS_MAX1668
> @@ -838,7 +838,7 @@ config SENSORS_MAX1668
>  	  If you say yes here you get support for MAX1668, MAX1989 and
>  	  MAX1805 chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max1668.
>  
>  config SENSORS_MAX197
> @@ -881,7 +881,7 @@ config SENSORS_MAX6639
>  	  If you say yes here you get support for the MAX6639
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max6639.
>  
>  config SENSORS_MAX6642
> @@ -892,7 +892,7 @@ config SENSORS_MAX6642
>  	  MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
>  	  with Overtemperature Alarm from Maxim.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max6642.
>  
>  config SENSORS_MAX6650
> @@ -902,7 +902,7 @@ config SENSORS_MAX6650
>  	  If you say yes here you get support for the MAX6650 / MAX6651
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max6650.
>  
>  config SENSORS_MAX6697
> @@ -913,7 +913,7 @@ config SENSORS_MAX6697
>  	  MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
>  	  temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max6697.
>  
>  config SENSORS_MAX31790
> @@ -923,7 +923,7 @@ config SENSORS_MAX31790
>  	  If you say yes here you get support for 6-Channel PWM-Output
>  	  Fan RPM Controller.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called max31790.
>  
>  config SENSORS_MCP3021
> @@ -934,7 +934,7 @@ config SENSORS_MCP3021
>  	  The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
>  	  with 12-bit resolution.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called mcp3021.
>  
>  config SENSORS_MLXREG_FAN
> @@ -957,7 +957,7 @@ config SENSORS_TC654
>  	  The TC654 and TC655 are PWM mode fan speed controllers with
>  	  FanSense technology for use with brushless DC fans.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tc654.
>  
>  config SENSORS_MENF21BMC_HWMON
> @@ -983,7 +983,7 @@ config SENSORS_ADCXX
>  
>  	  Examples : ADC081S101, ADC124S501, ...
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called adcxx.
>  
>  config SENSORS_LM63
> @@ -996,7 +996,7 @@ config SENSORS_LM63
>  	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
>  	  others.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm63.
>  
>  config SENSORS_LM70
> @@ -1007,7 +1007,7 @@ config SENSORS_LM70
>  	  LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
>  	  ture sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm70.
>  
>  config SENSORS_LM73
> @@ -1016,7 +1016,7 @@ config SENSORS_LM73
>  	help
>  	  If you say yes here you get support for National Semiconductor LM73
>  	  sensor chips.
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm73.
>  
>  config SENSORS_LM75
> @@ -1046,7 +1046,7 @@ config SENSORS_LM75
>  	  that with some chips which don't replicate LM75 quirks exactly,
>  	  you may need the "force" module parameter.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm75.
>  
>  config SENSORS_LM77
> @@ -1056,7 +1056,7 @@ config SENSORS_LM77
>  	  If you say yes here you get support for National Semiconductor LM77
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm77.
>  
>  config SENSORS_LM78
> @@ -1067,7 +1067,7 @@ config SENSORS_LM78
>  	  If you say yes here you get support for National Semiconductor LM78,
>  	  LM78-J and LM79.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm78.
>  
>  config SENSORS_LM80
> @@ -1077,7 +1077,7 @@ config SENSORS_LM80
>  	  If you say yes here you get support for National Semiconductor
>  	  LM80 and LM96080 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm80.
>  
>  config SENSORS_LM83
> @@ -1087,7 +1087,7 @@ config SENSORS_LM83
>  	  If you say yes here you get support for National Semiconductor
>  	  LM82 and LM83 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm83.
>  
>  config SENSORS_LM85
> @@ -1099,7 +1099,7 @@ config SENSORS_LM85
>  	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
>  	  EMC6D101, EMC6D102, and EMC6D103.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm85.
>  
>  config SENSORS_LM87
> @@ -1110,7 +1110,7 @@ config SENSORS_LM87
>  	  If you say yes here you get support for National Semiconductor LM87
>  	  and Analog Devices ADM1024 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm87.
>  
>  config SENSORS_LM90
> @@ -1124,7 +1124,7 @@ config SENSORS_LM90
>  	  Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and
>  	  Texas Instruments TMP451 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm90.
>  
>  config SENSORS_LM92
> @@ -1134,7 +1134,7 @@ config SENSORS_LM92
>  	  If you say yes here you get support for National Semiconductor LM92
>  	  and Maxim MAX6635 sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm92.
>  
>  config SENSORS_LM93
> @@ -1145,7 +1145,7 @@ config SENSORS_LM93
>  	  If you say yes here you get support for National Semiconductor LM93,
>  	  LM94, and compatible sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm93.
>  
>  config SENSORS_LM95234
> @@ -1155,7 +1155,7 @@ config SENSORS_LM95234
>  	  If you say yes here you get support for the LM95233 and LM95234
>  	  temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm95234.
>  
>  config SENSORS_LM95241
> @@ -1165,7 +1165,7 @@ config SENSORS_LM95241
>  	  If you say yes here you get support for LM95231 and LM95241 sensor
>  	  chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm95241.
>  
>  config SENSORS_LM95245
> @@ -1176,7 +1176,7 @@ config SENSORS_LM95245
>  	  If you say yes here you get support for LM95235 and LM95245
>  	  temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called lm95245.
>  
>  config SENSORS_PC87360
> @@ -1190,7 +1190,7 @@ config SENSORS_PC87360
>  	  control.  The PC87365 and PC87366 additionally have voltage and
>  	  temperature monitoring.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called pc87360.
>  
>  config SENSORS_PC87427
> @@ -1204,7 +1204,7 @@ config SENSORS_PC87427
>  	  monitoring. Fan speed monitoring and control are supported, as
>  	  well as temperature monitoring. Voltages aren't supported yet.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called pc87427.
>  
>  config SENSORS_NTC_THERMISTOR
> @@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR
>  	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
>  	  NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ntc-thermistor.
>  
>  config SENSORS_NCT6683
> @@ -1230,7 +1230,7 @@ config SENSORS_NCT6683
>  	  If you say yes here you get support for the hardware monitoring
>  	  functionality of the Nuvoton NCT6683D eSIO chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called nct6683.
>  
>  config SENSORS_NCT6775
> @@ -1244,7 +1244,7 @@ config SENSORS_NCT6775
>  	  Super-I/O chips. This driver replaces the w83627ehf driver for
>  	  NCT6775F and NCT6776F.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called nct6775.
>  
>  config SENSORS_NCT7802
> @@ -1255,7 +1255,7 @@ config SENSORS_NCT7802
>  	  If you say yes here you get support for the Nuvoton NCT7802Y
>  	  hardware monitoring chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called nct7802.
>  
>  config SENSORS_NCT7904
> @@ -1265,7 +1265,7 @@ config SENSORS_NCT7904
>  	  If you say yes here you get support for the Nuvoton NCT7904
>  	  hardware monitoring chip, including manual fan speed control.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called nct7904.
>  
>  config SENSORS_NPCM7XX
> @@ -1302,11 +1302,11 @@ config SENSORS_PCF8591
>  	  If you say yes here you get support for Philips PCF8591 4-channel
>  	  ADC, 1-channel DAC chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called pcf8591.
>  
>  	  These devices are hard to detect and rarely found on mainstream
> -	  hardware.  If unsure, say N.
> +	  hardware. If unsure, say N.
>  
>  source drivers/hwmon/pmbus/Kconfig
>  
> @@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN
>  	  The driver uses the generic PWM interface, thus it will work on a
>  	  variety of SoCs.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called pwm-fan.
>  
>  config SENSORS_RASPBERRYPI_HWMON
> @@ -1340,7 +1340,7 @@ config SENSORS_SHT15
>  	  If you say yes here you get support for the Sensiron SHT10, SHT11,
>  	  SHT15, SHT71, SHT75 humidity and temperature sensors.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sht15.
>  
>  config SENSORS_SHT21
> @@ -1350,7 +1350,7 @@ config SENSORS_SHT21
>  	  If you say yes here you get support for the Sensiron SHT21, SHT25
>  	  humidity and temperature sensors.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sht21.
>  
>  config SENSORS_SHT3x
> @@ -1361,7 +1361,7 @@ config SENSORS_SHT3x
>  	  If you say yes here you get support for the Sensiron SHT30 and SHT31
>  	  humidity and temperature sensors.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sht3x.
>  
>  config SENSORS_SHTC1
> @@ -1371,7 +1371,7 @@ config SENSORS_SHTC1
>  	  If you say yes here you get support for the Sensiron SHTC1 and SHTW1
>  	  humidity and temperature sensors.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called shtc1.
>  
>  config SENSORS_S3C
> @@ -1398,7 +1398,7 @@ config SENSORS_SIS5595
>  	  If you say yes here you get support for the integrated sensors in
>  	  SiS5595 South Bridges.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sis5595.
>  
>  config SENSORS_DME1737
> @@ -1410,7 +1410,7 @@ config SENSORS_DME1737
>  	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
>  	  Asus A8000 Super-I/O chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called dme1737.
>  
>  config SENSORS_EMC1403
> @@ -1431,7 +1431,7 @@ config SENSORS_EMC2103
>  	  If you say yes here you get support for the temperature
>  	  and fan sensors of the SMSC EMC2103 chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called emc2103.
>  
>  config SENSORS_EMC6W201
> @@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201
>  	  If you say yes here you get support for the SMSC EMC6W201
>  	  hardware monitoring chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called emc6w201.
>  
>  config SENSORS_SMSC47M1
> @@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1
>  	  driver, select also "SMSC LPC47M192 and compatibles" below for
>  	  those.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called smsc47m1.
>  
>  config SENSORS_SMSC47M192
> @@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192
>  	  "SMSC LPC47M10x and compatibles" above. You need both drivers
>  	  if you want fan control and voltage/temperature sensor support.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called smsc47m192.
>  
>  config SENSORS_SMSC47B397
> @@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397
>  	  If you say yes here you get support for the SMSC LPC47B397-NC
>  	  sensor chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called smsc47b397.
>  
>  config SENSORS_SCH56XX_COMMON
> @@ -1501,7 +1501,7 @@ config SENSORS_SCH5627
>  	  features of the SMSC SCH5627 Super-I/O chip including support for
>  	  the integrated watchdog.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sch5627.
>  
>  config SENSORS_SCH5636
> @@ -1519,7 +1519,7 @@ config SENSORS_SCH5636
>  	  Theseus' hardware monitoring features including support for the
>  	  integrated watchdog.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called sch5636.
>  
>  config SENSORS_STTS751
> @@ -1529,7 +1529,7 @@ config SENSORS_STTS751
>  	  If you say yes here you get support for STTS751
>  	  temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called stts751.
>  
>  config SENSORS_SMM665
> @@ -1563,7 +1563,7 @@ config SENSORS_ADS1015
>  	  If you say yes here you get support for Texas Instruments
>  	  ADS1015/ADS1115 12/16-bit 4-input ADC device.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ads1015.
>  
>  config SENSORS_ADS7828
> @@ -1575,7 +1575,7 @@ config SENSORS_ADS7828
>  	  ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
>  	  it is 8-bit on ADS7830.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ads7828.
>  
>  config SENSORS_ADS7871
> @@ -1584,7 +1584,7 @@ config SENSORS_ADS7871
>  	help
>  	  If you say yes here you get support for TI ADS7871 & ADS7870
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ads7871.
>  
>  config SENSORS_AMC6821
> @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
>  	  If you say yes here you get support for the Texas Instruments
>  	  AMC6821 hardware monitoring chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called amc6821.
>  
>  config SENSORS_INA209
> @@ -1618,7 +1618,7 @@ config SENSORS_INA2XX
>  	  The INA2xx driver is configured for the default configuration of
>  	  the part as described in the datasheet.
>  	  Default value for Rshunt is 10 mOhms.
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ina2xx.
>  
>  config SENSORS_INA3221
> @@ -1629,7 +1629,7 @@ config SENSORS_INA3221
>  	  If you say yes here you get support for  the TI INA3221 Triple Power
>  	  Monitor.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called ina3221.
>  
>  config SENSORS_TC74
> @@ -1639,7 +1639,7 @@ config SENSORS_TC74
>  	  If you say yes here you get support for Microchip TC74 single
>  	  input temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tc74.
>  
>  config SENSORS_THMC50
> @@ -1649,7 +1649,7 @@ config SENSORS_THMC50
>  	  If you say yes here you get support for Texas Instruments THMC50
>  	  sensor chips and clones: the Analog Devices ADM1022.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called thmc50.
>  
>  config SENSORS_TMP102
> @@ -1660,7 +1660,7 @@ config SENSORS_TMP102
>  	  If you say yes here you get support for Texas Instruments TMP102
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tmp102.
>  
>  config SENSORS_TMP103
> @@ -1671,7 +1671,7 @@ config SENSORS_TMP103
>  	  If you say yes here you get support for Texas Instruments TMP103
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tmp103.
>  
>  config SENSORS_TMP108
> @@ -1682,7 +1682,7 @@ config SENSORS_TMP108
>  	  If you say yes here you get support for Texas Instruments TMP108
>  	  sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tmp108.
>  
>  config SENSORS_TMP401
> @@ -1692,7 +1692,7 @@ config SENSORS_TMP401
>  	  If you say yes here you get support for Texas Instruments TMP401,
>  	  TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tmp401.
>  
>  config SENSORS_TMP421
> @@ -1702,7 +1702,7 @@ config SENSORS_TMP421
>  	  If you say yes here you get support for Texas Instruments TMP421,
>  	  TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called tmp421.
>  
>  config SENSORS_VEXPRESS
> @@ -1729,7 +1729,7 @@ config SENSORS_VIA686A
>  	  If you say yes here you get support for the integrated sensors in
>  	  Via 686A/B South Bridges.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called via686a.
>  
>  config SENSORS_VT1211
> @@ -1740,7 +1740,7 @@ config SENSORS_VT1211
>  	  If you say yes here then you get support for hardware monitoring
>  	  features of the VIA VT1211 Super-I/O chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called vt1211.
>  
>  config SENSORS_VT8231
> @@ -1751,7 +1751,7 @@ config SENSORS_VT8231
>  	  If you say yes here then you get support for the integrated sensors
>  	  in the VIA VT8231 device.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called vt8231.
>  
>  config SENSORS_W83773G
> @@ -1761,7 +1761,7 @@ config SENSORS_W83773G
>  	  If you say yes here you get support for the Nuvoton W83773G hardware
>  	  monitoring chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83773g.
>  
>  config SENSORS_W83781D
> @@ -1773,7 +1773,7 @@ config SENSORS_W83781D
>  	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
>  	  Asus AS99127F.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83781d.
>  
>  config SENSORS_W83791D
> @@ -1783,7 +1783,7 @@ config SENSORS_W83791D
>  	help
>  	  If you say yes here you get support for the Winbond W83791D chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83791d.
>  
>  config SENSORS_W83792D
> @@ -1792,7 +1792,7 @@ config SENSORS_W83792D
>  	help
>  	  If you say yes here you get support for the Winbond W83792D chip.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83792d.
>  
>  config SENSORS_W83793
> @@ -1804,7 +1804,7 @@ config SENSORS_W83793
>  	  hardware monitoring chip, including support for the integrated
>  	  watchdog.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83793.
>  
>  config SENSORS_W83795
> @@ -1815,7 +1815,7 @@ config SENSORS_W83795
>  	  W83795ADG hardware monitoring chip, including manual fan speed
>  	  control.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83795.
>  
>  config SENSORS_W83795_FANCTRL
> @@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS
>  	  sensor chip, which is used on the Asus A7N8X, among other
>  	  motherboards.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83l785ts.
>  
>  config SENSORS_W83L786NG
> @@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG
>  	  If you say yes here you get support for the Winbond W83L786NG
>  	  and W83L786NR sensor chips.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83l786ng.
>  
>  config SENSORS_W83627HF
> @@ -1864,7 +1864,7 @@ config SENSORS_W83627HF
>  	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
>  	  W83697HF.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83627hf.
>  
>  config SENSORS_W83627EHF
> @@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF
>  	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
>  	  (also known as W83667HG-I), and NCT6776F.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called w83627ehf.
>  
>  config SENSORS_WM831X
> @@ -1895,7 +1895,7 @@ config SENSORS_WM831X
>  	  monitoring functionality of the Wolfson Microelectronics
>  	  WM831x series of PMICs.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called wm831x-hwmon.
>  
>  config SENSORS_WM8350
> @@ -1905,7 +1905,7 @@ config SENSORS_WM8350
>  	  If you say yes here you get support for the hardware
>  	  monitoring features of the WM835x series of PMICs.
>  
> -	  This driver can also be built as a module.  If so, the module
> +	  This driver can also be built as a module. If so, the module
>  	  will be called wm8350-hwmon.
>  
>  config SENSORS_ULTRA45

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] hwmon: Remove multiple space after dot
  2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
  2018-12-01 18:34   ` Guenter Roeck
@ 2018-12-01 20:27   ` Joe Perches
  2018-12-01 20:34     ` Randy Dunlap
  1 sibling, 1 reply; 6+ messages in thread
From: Joe Perches @ 2018-12-01 20:27 UTC (permalink / raw)
  To: Corentin Labbe, jdelvare, linux; +Cc: linux-hwmon, linux-kernel

On Thu, 2018-11-29 at 20:09 +0000, Corentin Labbe wrote:
> This patch remove extra space after a dot.
[]
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
---
>  drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
>  1 file changed, 118 insertions(+), 118 deletions(-)
[]
> @@ -11,7 +11,7 @@ menuconfig HWMON
>  	  of a system. Most modern motherboards include such a device. It
>  	  can include temperature sensors, voltage sensors, fan speed
>  	  sensors and various additional features such as the ability to
> -	  control the speed of the fans.  If you want this support you
> +	  control the speed of the fans. If you want this support you
>  	  should say Y here and also to the specific driver(s) for your
>  	  sensors chip(s) below.

Please no.

You can't pry two spaces after a period when using a
fixed width font from me.

And the use is nowhere consistent in the kernel as it's
less than 2:1 in favor of one style over the other.

$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' | wc -l
146888
$ git grep -i '[a-z][a-z]\.  [a-z][a-z ]' | wc -l
85195

The kernel Kconfig use ratio is similar.

$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- '*/Kconfig*' | wc -l
5389
$ git grep -i '[a-z][a-z]\.  [a-z][a-z ]' -- '*/Kconfig*' | wc -l
2463

And even in this specific file, it's reversed ratio

$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l
70
$ git grep -i '[a-z][a-z]\.  [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l
129

So if you _really_ wanted to do this, please do the
entire file consistently.

You seemed to do 118 conversions.  Shouldn't there be 129?

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] hwmon: Remove multiple space after dot
  2018-12-01 20:27   ` Joe Perches
@ 2018-12-01 20:34     ` Randy Dunlap
  0 siblings, 0 replies; 6+ messages in thread
From: Randy Dunlap @ 2018-12-01 20:34 UTC (permalink / raw)
  To: Joe Perches, Corentin Labbe, jdelvare, linux; +Cc: linux-hwmon, linux-kernel

On 12/1/18 12:27 PM, Joe Perches wrote:
> On Thu, 2018-11-29 at 20:09 +0000, Corentin Labbe wrote:
>> This patch remove extra space after a dot.
> []
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> ---
>>  drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
>>  1 file changed, 118 insertions(+), 118 deletions(-)
> []
>> @@ -11,7 +11,7 @@ menuconfig HWMON
>>  	  of a system. Most modern motherboards include such a device. It
>>  	  can include temperature sensors, voltage sensors, fan speed
>>  	  sensors and various additional features such as the ability to
>> -	  control the speed of the fans.  If you want this support you
>> +	  control the speed of the fans. If you want this support you
>>  	  should say Y here and also to the specific driver(s) for your
>>  	  sensors chip(s) below.
> 
> Please no.

Ack.  No need for such a patch.


-- 
~Randy

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2018-12-02  7:47 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-29 20:09 [PATCH 1/2] hwmon: fix typo build -> built Corentin Labbe
2018-11-29 20:09 ` [PATCH 2/2] hwmon: Remove multiple space after dot Corentin Labbe
2018-12-01 18:34   ` Guenter Roeck
2018-12-01 20:27   ` Joe Perches
2018-12-01 20:34     ` Randy Dunlap
2018-12-01 18:32 ` [PATCH 1/2] hwmon: fix typo build -> built Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).