From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga04.intel.com ([192.55.52.120]:32596 "EHLO mga04.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727537AbeLRVEr (ORCPT ); Tue, 18 Dec 2018 16:04:47 -0500 From: Jae Hyun Yoo To: Lee Jones , Rob Herring , Jean Delvare , Guenter Roeck , Mark Rutland , Joel Stanley , Andrew Jeffery , Jonathan Corbet , Greg Kroah-Hartman , Gustavo Pimentel , Kishon Vijay Abraham I , Lorenzo Pieralisi , "Darrick J . Wong" , Eric Sandeen , Arnd Bergmann , Wu Hao , Tomohiro Kusumi , "Bryant G . Ly" , Frederic Barrat , "David S . Miller" , Mauro Carvalho Chehab , Andrew Morton , Randy Dunlap , Philippe Ombredanne , Vinod Koul , Stephen Boyd , David Kershner , Uwe Kleine-Konig , Sagar Dharia , Johan Hovold , Thomas Gleixner , Juergen Gross , Cyrille Pitchen Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, openbmc@lists.ozlabs.org, Jae Hyun Yoo , Alan Cox , Andy Shevchenko , Jason M Biils , Miguel Ojeda , Andrew Lunn , Stef van Os Subject: [PATCH v9 11/12] hwmon: Add PECI dimmtemp driver Date: Tue, 18 Dec 2018 13:04:16 -0800 Message-Id: <20181218210417.30140-12-jae.hyun.yoo@linux.intel.com> In-Reply-To: <20181218210417.30140-1-jae.hyun.yoo@linux.intel.com> References: <20181218210417.30140-1-jae.hyun.yoo@linux.intel.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-hwmon-owner@vger.kernel.org List-Id: linux-hwmon@vger.kernel.org This commit adds PECI dimmtemp hwmon driver. Cc: Guenter Roeck Cc: Jean Delvare Cc: Alan Cox Cc: Andrew Jeffery Cc: Andy Shevchenko Cc: Arnd Bergmann Cc: Jason M Biils Cc: Joel Stanley Cc: Miguel Ojeda Cc: Andrew Lunn Cc: Stef van Os Signed-off-by: Jae Hyun Yoo Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery Acked-by: Guenter Roeck --- drivers/hwmon/Kconfig | 14 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/peci-dimmtemp.c | 284 ++++++++++++++++++++++++++++++++++ 3 files changed, 299 insertions(+) create mode 100644 drivers/hwmon/peci-dimmtemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index f08b4a670ac5..d2299d850508 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1320,6 +1320,20 @@ config SENSORS_PECI_CPUTEMP This driver can also be built as a module. If so, the module will be called peci-cputemp. +config SENSORS_PECI_DIMMTEMP + tristate "PECI DIMM temperature monitoring support" + depends on PECI + select MFD_INTEL_PECI_CLIENT + help + If you say yes here you get support for the generic Intel PECI hwmon + driver which provides Digital Thermal Sensor (DTS) thermal readings of + DIMM components that are accessible using the PECI Client Command + Suite via the processor PECI client. + Check Documentation/hwmon/peci-dimmtemp for details. + + This driver can also be built as a module. If so, the module + will be called peci-dimmtemp. + source drivers/hwmon/pmbus/Kconfig config SENSORS_PWM_FAN diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 13ebde089ad5..b7cf35bcfbaf 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -142,6 +142,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o +obj-$(CONFIG_SENSORS_PECI_DIMMTEMP) += peci-dimmtemp.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o diff --git a/drivers/hwmon/peci-dimmtemp.c b/drivers/hwmon/peci-dimmtemp.c new file mode 100644 index 000000000000..86a45a90805b --- /dev/null +++ b/drivers/hwmon/peci-dimmtemp.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2018 Intel Corporation + +#include +#include +#include +#include +#include +#include +#include +#include "peci-hwmon.h" + +#define DIMM_MASK_CHECK_DELAY_JIFFIES msecs_to_jiffies(5000) +#define DIMM_MASK_CHECK_RETRY_MAX 60 /* 60 x 5 secs = 5 minutes */ + +struct peci_dimmtemp { + struct peci_client_manager *mgr; + struct device *dev; + char name[PECI_NAME_SIZE]; + const struct cpu_gen_info *gen_info; + struct workqueue_struct *work_queue; + struct delayed_work work_handler; + struct temp_data temp[DIMM_NUMS_MAX]; + u32 dimm_mask; + int retry_count; + u32 temp_config[DIMM_NUMS_MAX + 1]; + struct hwmon_channel_info temp_info; + const struct hwmon_channel_info *info[2]; + struct hwmon_chip_info chip; +}; + +static const char *dimmtemp_label[CHAN_RANK_MAX][DIMM_IDX_MAX] = { + { "DIMM A1", "DIMM A2", "DIMM A3" }, + { "DIMM B1", "DIMM B2", "DIMM B3" }, + { "DIMM C1", "DIMM C2", "DIMM C3" }, + { "DIMM D1", "DIMM D2", "DIMM D3" }, + { "DIMM E1", "DIMM E2", "DIMM E3" }, + { "DIMM F1", "DIMM F2", "DIMM F3" }, + { "DIMM G1", "DIMM G2", "DIMM G3" }, + { "DIMM H1", "DIMM H2", "DIMM H3" }, +}; + +static int get_dimm_temp(struct peci_dimmtemp *priv, int dimm_no) +{ + int dimm_order = dimm_no % priv->gen_info->dimm_idx_max; + int chan_rank = dimm_no / priv->gen_info->dimm_idx_max; + u8 cfg_data[4]; + int rc; + + if (!peci_temp_need_update(&priv->temp[dimm_no])) + return 0; + + rc = peci_client_read_package_config(priv->mgr, + MBX_INDEX_DDR_DIMM_TEMP, + chan_rank, cfg_data); + if (rc) + return rc; + + priv->temp[dimm_no].value = cfg_data[dimm_order] * 1000; + + peci_temp_mark_updated(&priv->temp[dimm_no]); + + return 0; +} + +static int dimmtemp_read_string(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + struct peci_dimmtemp *priv = dev_get_drvdata(dev); + u32 dimm_idx_max = priv->gen_info->dimm_idx_max; + int chan_rank, dimm_idx; + + if (attr != hwmon_temp_label) + return -EOPNOTSUPP; + + chan_rank = channel / dimm_idx_max; + dimm_idx = channel % dimm_idx_max; + *str = dimmtemp_label[chan_rank][dimm_idx]; + return 0; +} + +static int dimmtemp_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct peci_dimmtemp *priv = dev_get_drvdata(dev); + int rc; + + if (attr != hwmon_temp_input) + return -EOPNOTSUPP; + + rc = get_dimm_temp(priv, channel); + if (rc) + return rc; + + *val = priv->temp[channel].value; + return 0; +} + +static umode_t dimmtemp_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + const struct peci_dimmtemp *priv = data; + + if (priv->temp_config[channel] & BIT(attr) && + priv->dimm_mask & BIT(channel)) + return 0444; + + return 0; +} + +static const struct hwmon_ops dimmtemp_ops = { + .is_visible = dimmtemp_is_visible, + .read_string = dimmtemp_read_string, + .read = dimmtemp_read, +}; + +static int check_populated_dimms(struct peci_dimmtemp *priv) +{ + u32 chan_rank_max = priv->gen_info->chan_rank_max; + u32 dimm_idx_max = priv->gen_info->dimm_idx_max; + int chan_rank, dimm_idx, rc; + u8 cfg_data[4]; + + for (chan_rank = 0; chan_rank < chan_rank_max; chan_rank++) { + rc = peci_client_read_package_config(priv->mgr, + MBX_INDEX_DDR_DIMM_TEMP, + chan_rank, cfg_data); + if (rc) { + priv->dimm_mask = 0; + return rc; + } + + for (dimm_idx = 0; dimm_idx < dimm_idx_max; dimm_idx++) + if (cfg_data[dimm_idx]) + priv->dimm_mask |= BIT(chan_rank * + dimm_idx_max + + dimm_idx); + } + + if (!priv->dimm_mask) + return -EAGAIN; + + dev_dbg(priv->dev, "Scanned populated DIMMs: 0x%x\n", priv->dimm_mask); + return 0; +} + +static int create_dimm_temp_info(struct peci_dimmtemp *priv) +{ + int rc, i, config_idx, channels; + struct device *hwmon_dev; + + rc = check_populated_dimms(priv); + if (rc) { + if (rc == -EAGAIN) { + if (priv->retry_count < DIMM_MASK_CHECK_RETRY_MAX) { + queue_delayed_work(priv->work_queue, + &priv->work_handler, + DIMM_MASK_CHECK_DELAY_JIFFIES); + priv->retry_count++; + dev_dbg(priv->dev, + "Deferred DIMM temp info creation\n"); + } else { + dev_err(priv->dev, + "Timeout DIMM temp info creation\n"); + rc = -ETIMEDOUT; + } + } + + return rc; + } + + channels = priv->gen_info->chan_rank_max * + priv->gen_info->dimm_idx_max; + for (i = 0, config_idx = 0; i < channels; i++) + if (priv->dimm_mask & BIT(i)) + while (i >= config_idx) + priv->temp_config[config_idx++] = + HWMON_T_LABEL | HWMON_T_INPUT; + + priv->chip.ops = &dimmtemp_ops; + priv->chip.info = priv->info; + + priv->info[0] = &priv->temp_info; + + priv->temp_info.type = hwmon_temp; + priv->temp_info.config = priv->temp_config; + + hwmon_dev = devm_hwmon_device_register_with_info(priv->dev, + priv->name, + priv, + &priv->chip, + NULL); + rc = PTR_ERR_OR_ZERO(hwmon_dev); + if (!rc) + dev_dbg(priv->dev, "%s: sensor '%s'\n", + dev_name(hwmon_dev), priv->name); + + return rc; +} + +static void create_dimm_temp_info_delayed(struct work_struct *work) +{ + struct delayed_work *dwork = to_delayed_work(work); + struct peci_dimmtemp *priv = container_of(dwork, struct peci_dimmtemp, + work_handler); + int rc; + + rc = create_dimm_temp_info(priv); + if (rc && rc != -EAGAIN) + dev_dbg(priv->dev, "Failed to create DIMM temp info\n"); +} + +static int peci_dimmtemp_probe(struct platform_device *pdev) +{ + struct peci_client_manager *mgr = dev_get_drvdata(pdev->dev.parent); + struct device *dev = &pdev->dev; + struct peci_dimmtemp *priv; + int rc; + + if ((mgr->client->adapter->cmd_mask & + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) != + (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) + return -ENODEV; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + priv->mgr = mgr; + priv->dev = dev; + priv->gen_info = mgr->gen_info; + + snprintf(priv->name, PECI_NAME_SIZE, "peci_dimmtemp.cpu%d", + priv->mgr->client->addr - PECI_BASE_ADDR); + + priv->work_queue = alloc_ordered_workqueue(priv->name, 0); + if (!priv->work_queue) + return -ENOMEM; + + INIT_DELAYED_WORK(&priv->work_handler, create_dimm_temp_info_delayed); + + rc = create_dimm_temp_info(priv); + if (rc && rc != -EAGAIN) { + dev_err(dev, "Failed to create DIMM temp info\n"); + goto err_free_wq; + } + + return 0; + +err_free_wq: + destroy_workqueue(priv->work_queue); + return rc; +} + +static int peci_dimmtemp_remove(struct platform_device *pdev) +{ + struct peci_dimmtemp *priv = dev_get_drvdata(&pdev->dev); + + cancel_delayed_work_sync(&priv->work_handler); + destroy_workqueue(priv->work_queue); + + return 0; +} + +static const struct platform_device_id peci_dimmtemp_ids[] = { + { .name = "peci-dimmtemp", .driver_data = 0 }, + { } +}; +MODULE_DEVICE_TABLE(platform, peci_dimmtemp_ids); + +static struct platform_driver peci_dimmtemp_driver = { + .probe = peci_dimmtemp_probe, + .remove = peci_dimmtemp_remove, + .id_table = peci_dimmtemp_ids, + .driver = { .name = "peci-dimmtemp", }, +}; +module_platform_driver(peci_dimmtemp_driver); + +MODULE_AUTHOR("Jae Hyun Yoo "); +MODULE_DESCRIPTION("PECI dimmtemp driver"); +MODULE_LICENSE("GPL v2"); -- 2.19.1