Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: jdelvare@suse.com, linux@roeck-us.net
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] hwmon: (ina3221) Implement ti,single-shot DT property
Date: Thu, 17 Jan 2019 15:12:53 -0800
Message-ID: <20190117231253.8828-3-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <20190117231253.8828-1-nicoleotsuka@gmail.com>

By default, ina3221, as a hardware monitor, continuously measures
the inputs and generates corresponding data. However, for battery
powered devices, this mode might be power consuming.

The DT binding doc is updated with a new boolean type property to
allow changing the default operating mode from consuming mode to
single-shot mode, which will measure input on demand and then shut
down to save power.

So this patch implements the DT property accordingly.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
Changelog
v2->v3:
 * Dropped useless if condition by using the return value directly.
v1->v2:
 * Replaced the useless mode defines with a boolean variable.

 drivers/hwmon/ina3221.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index e90ccac8bebb..a1e94d5d1e41 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -111,6 +111,7 @@ struct ina3221_input {
  * @inputs: Array of channel input source specific structures
  * @lock: mutex lock to serialize sysfs attribute accesses
  * @reg_config: Register value of INA3221_CONFIG
+ * @single_shot: running in single-shot operating mode
  */
 struct ina3221_data {
 	struct device *pm_dev;
@@ -119,6 +120,8 @@ struct ina3221_data {
 	struct ina3221_input inputs[INA3221_NUM_CHANNELS];
 	struct mutex lock;
 	u32 reg_config;
+
+	bool single_shot;
 };
 
 static inline bool ina3221_is_enabled(struct ina3221_data *ina, int channel)
@@ -188,6 +191,11 @@ static int ina3221_read_in(struct device *dev, u32 attr, int channel, long *val)
 		if (!ina3221_is_enabled(ina, channel))
 			return -ENODATA;
 
+		/* Write CONFIG register to trigger a single-shot measurement */
+		if (ina->single_shot)
+			regmap_write(ina->regmap, INA3221_CONFIG,
+				     ina->reg_config);
+
 		ret = ina3221_wait_for_data(ina);
 		if (ret)
 			return ret;
@@ -232,6 +240,11 @@ static int ina3221_read_curr(struct device *dev, u32 attr,
 		if (!ina3221_is_enabled(ina, channel))
 			return -ENODATA;
 
+		/* Write CONFIG register to trigger a single-shot measurement */
+		if (ina->single_shot)
+			regmap_write(ina->regmap, INA3221_CONFIG,
+				     ina->reg_config);
+
 		ret = ina3221_wait_for_data(ina);
 		if (ret)
 			return ret;
@@ -617,6 +630,8 @@ static int ina3221_probe_from_dt(struct device *dev, struct ina3221_data *ina)
 	if (!np)
 		return 0;
 
+	ina->single_shot = of_property_read_bool(np, "ti,single-shot");
+
 	for_each_child_of_node(np, child) {
 		ret = ina3221_probe_child_from_dt(dev, child, ina);
 		if (ret)
@@ -666,6 +681,10 @@ static int ina3221_probe(struct i2c_client *client,
 	/* The driver will be reset, so use reset value */
 	ina->reg_config = INA3221_CONFIG_DEFAULT;
 
+	/* Clear continuous bit to use single-shot mode */
+	if (ina->single_shot)
+		ina->reg_config &= ~INA3221_CONFIG_MODE_CONTINUOUS;
+
 	/* Disable channels if their inputs are disconnected */
 	for (i = 0; i < INA3221_NUM_CHANNELS; i++) {
 		if (ina->inputs[i].disconnected)
-- 
2.17.1


  parent reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-17 23:12 [PATCH v3 0/2] hwmon (ina3221) Add single-shot mode support Nicolin Chen
2019-01-17 23:12 ` [PATCH v3 1/2] dt-bindings: hwmon: ina3221: Add ti,single-shot property Nicolin Chen
2019-01-17 23:12 ` Nicolin Chen [this message]
2019-01-17 23:36 ` [PATCH v3 0/2] hwmon (ina3221) Add single-shot mode support Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190117231253.8828-3-nicoleotsuka@gmail.com \
    --to=nicoleotsuka@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox