Linux-Hwmon Archive on
 help / color / Atom feed
From: Guenter Roeck <>
To: Jeremy Gebben <>
Cc: Jean Delvare <>,,
Subject: Re: [PATCH 0/3] hwmon: (lm85) add LM96000 high freqency pwm support
Date: Tue, 29 Jan 2019 15:38:24 -0800
Message-ID: <> (raw)
In-Reply-To: <>

On Tue, Jan 29, 2019 at 02:29:17PM -0700, Jeremy Gebben wrote:
> Hi,
> This patch adds support for the PWM frequencies from 22.5 to 30 kHz
> available on the LM96000.
> It looks like this chip has been supported for a long time, but wasn't
> mentioned in the docs (which I have updated).
> Also, it has been using the generic 'lm85' prefix, which I have not
> changed to avoid breaking userspace or device tree files. AFAICT,
> lm85_detect() will only return 'lm85' for LM96000 chips, so it doesn't
> look like you can get a bare 'lm85' prefix with any other chips.
> I stumbled on to a 10 year old thread discussing a patch which looks
> like an early attempt to add support for this chip, which may be of
> interest:
> Thanks for reviewing,
Where are the actual patches ?


  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 21:29 Jeremy Gebben
2019-01-29 23:38 ` Guenter Roeck [this message]
2019-01-30 16:19   ` Jeremy Gebben
2019-01-30 16:14 ` [PATCH resend 1/3] hwmon: (lm85) remove freq_map size hardcodes Jeremy Gebben
2019-01-30 16:14   ` [PATCH resend 2/3] hwmon: (lm85) Document the LM96000 as supported Jeremy Gebben
2019-01-30 16:14   ` [PATCH resend 3/3] hwmon: (lm85) add support for LM96000 high frequencies Jeremy Gebben
2019-01-30 17:25   ` [PATCH resend 1/3] hwmon: (lm85) remove freq_map size hardcodes Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox