Linux-Hwmon Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Kamil Debski <kamil@wypas.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Jean Delvare <jdelvare@suse.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] hwmon: pwm-fan: Add optional regulator support
Date: Thu, 31 Jan 2019 09:56:52 -0800
Message-ID: <20190131175651.GA16231@roeck-us.net> (raw)
In-Reply-To: <1548781631-5736-2-git-send-email-stefan.wahren@i2se.com>

On Tue, Jan 29, 2019 at 06:07:11PM +0100, Stefan Wahren wrote:
> This adds optional regulator support to the pwm-fan driver. This is
> necessary for pwm fans which are powered by a switchable supply.
> 
> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
> ---
>  drivers/hwmon/pwm-fan.c | 35 +++++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
> index 2c94482..9e0591e 100644
> --- a/drivers/hwmon/pwm-fan.c
> +++ b/drivers/hwmon/pwm-fan.c
> @@ -23,6 +23,7 @@
>  #include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pwm.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/sysfs.h>
>  #include <linux/thermal.h>
>  
> @@ -31,6 +32,7 @@
>  struct pwm_fan_ctx {
>  	struct mutex lock;
>  	struct pwm_device *pwm;
> +	struct regulator *reg_en;
>  	unsigned int pwm_value;
>  	unsigned int pwm_fan_state;
>  	unsigned int pwm_fan_max_state;
> @@ -244,6 +246,23 @@ static int pwm_fan_probe(struct platform_device *pdev)
>  		return ret;
>  	}
>  
> +	ctx->reg_en = devm_regulator_get_optional(&pdev->dev, "fan");
> +	if (!IS_ERR(ctx->reg_en)) {

It is customary to handle the error case first.

> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret)
> +			dev_err(&pdev->dev,
> +				"Failed to enable fan supply: %d\n", ret);
> +	} else {
> +		switch (PTR_ERR(ctx->reg_en)) {
> +		case -ENODEV:
> +		case -ENOSYS:

Does devm_regulator_get_optional() ever return -ENOSYS ?
I glanced through other calls to devm_regulator_get_optional(),
but I don't see that check anywhere.

> +			ctx->reg_en = NULL;
> +			break;
> +		default:
> +			return PTR_ERR(ctx->reg_en);
> +		}

This is inconsistent. Provided regulators which fail to enable are
accepted, albeit with an error message, while unexpected errors from
devm_regulator_get_optional() result in a bailout. Please be consistent.

> +	}
> +
>  	hwmon = devm_hwmon_device_register_with_groups(&pdev->dev, "pwmfan",
>  						       ctx, pwm_fan_groups);
>  	if (IS_ERR(hwmon)) {
> @@ -287,6 +306,10 @@ static int pwm_fan_remove(struct platform_device *pdev)
>  	thermal_cooling_device_unregister(ctx->cdev);
>  	if (ctx->pwm_value)
>  		pwm_disable(ctx->pwm);
> +
> +	if (ctx->reg_en)
> +		regulator_disable(ctx->reg_en);

As written, this is also called after regulator_enable() failed.
Same below.

> +
>  	return 0;
>  }
>  
> @@ -299,6 +322,12 @@ static int pwm_fan_suspend(struct device *dev)
>  
>  	pwm_get_args(ctx->pwm, &args);
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_disable(ctx->reg_en);
> +		if (ret)
> +			dev_err(dev, "Failed to disable fan supply: %d\n", ret);
> +	}
> +
>  	if (ctx->pwm_value) {
>  		ret = pwm_config(ctx->pwm, 0, args.period);
>  		if (ret < 0)
> @@ -317,6 +346,12 @@ static int pwm_fan_resume(struct device *dev)
>  	unsigned long duty;
>  	int ret;
>  
> +	if (ctx->reg_en) {
> +		ret = regulator_enable(ctx->reg_en);
> +		if (ret)
> +			dev_err(dev, "Failed to enable fan supply: %d\n", ret);
> +	}
> +
>  	if (ctx->pwm_value == 0)
>  		return 0;
>  

  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-29 17:07 [PATCH 1/2] dt-bindings: hwmon: Add optional regulator support to pwm-fan Stefan Wahren
2019-01-29 17:07 ` [PATCH 2/2] hwmon: pwm-fan: Add optional regulator support Stefan Wahren
2019-01-31 17:56   ` Guenter Roeck [this message]
2019-02-01 10:38     ` Stefan Wahren

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190131175651.GA16231@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=b.zolnierkie@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=kamil@wypas.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=stefan.wahren@i2se.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox