Linux-Hwmon Archive on lore.kernel.org
 help / Atom feed
From: Jeremy Gebben <jgebben@sweptlaser.com>
To: Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Jonathan Corbet <corbet@lwn.net>,
	linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 3/4] hwmon: (lm85) support the LM96000
Date: Mon,  4 Feb 2019 13:19:05 -0700
Message-ID: <20190204201906.8859-4-jgebben@sweptlaser.com> (raw)
In-Reply-To: <20190204201906.8859-1-jgebben@sweptlaser.com>

It has been supported as a generic lm85 for quite some time.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
---
 Documentation/hwmon/lm85 | 6 +++++-
 drivers/hwmon/lm85.c     | 9 +++++++--
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/lm85 b/Documentation/hwmon/lm85
index 7c49feaa79d2..4f531f4acc3f 100644
--- a/Documentation/hwmon/lm85
+++ b/Documentation/hwmon/lm85
@@ -3,9 +3,13 @@ Kernel driver lm85
 
 Supported chips:
   * National Semiconductor LM85 (B and C versions)
-    Prefix: 'lm85'
+    Prefix: 'lm85b' or 'lm85c'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: http://www.national.com/pf/LM/LM85.html
+  * Texas Instruments LM96000
+    Prefix: 'lm9600'
+    Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+    Datasheet: http://www.ti.com/lit/ds/symlink/lm96000.pdf
   * Analog Devices ADM1027
     Prefix: 'adm1027'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 4b15193d195c..b23cf8e4c54b 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@
 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 enum chips {
-	lm85,
+	lm85, lm96000,
 	adm1027, adt7463, adt7468,
 	emc6d100, emc6d102, emc6d103, emc6d103s
 };
@@ -1499,7 +1499,7 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 					"Found Winbond WPCD377I, ignoring\n");
 				return -ENODEV;
 			}
-			type_name = "lm85";
+			type_name = "lm96000";
 			break;
 		}
 	} else if (company == LM85_COMPANY_ANALOG_DEV) {
@@ -1623,6 +1623,7 @@ static const struct i2c_device_id lm85_id[] = {
 	{ "lm85", lm85 },
 	{ "lm85b", lm85 },
 	{ "lm85c", lm85 },
+	{ "lm96000", lm96000 },
 	{ "emc6d100", emc6d100 },
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
@@ -1657,6 +1658,10 @@ static const struct of_device_id lm85_of_match[] = {
 		.compatible = "national,lm85c",
 		.data = (void *)lm85
 	},
+	{
+		.compatible = "ti,lm96000",
+		.data = (void *)lm96000
+	},
 	{
 		.compatible = "smsc,emc6d100",
 		.data = (void *)emc6d100
-- 
2.17.1


  parent reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-04 20:19 [PATCH v3 0/4] hwmon: (lm85) add LM96000 high freqency pwm support Jeremy Gebben
2019-02-04 20:19 ` [PATCH v3 1/4] hwmon: (lm85) remove freq_map size hardcodes Jeremy Gebben
2019-02-04 20:19 ` [PATCH v3 2/4] dt-bindings: Add LM96000 as a trivial device Jeremy Gebben
2019-02-04 20:27   ` Rob Herring
2019-02-04 20:19 ` Jeremy Gebben [this message]
2019-02-04 20:19 ` [PATCH v3 4/4] hwmon: (lm85) add support for LM96000 high frequencies Jeremy Gebben
2019-02-04 22:45 ` [PATCH v3 0/4] hwmon: (lm85) add LM96000 high freqency pwm support Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190204201906.8859-4-jgebben@sweptlaser.com \
    --to=jgebben@sweptlaser.com \
    --cc=corbet@lwn.net \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-hwmon/0 linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ https://lore.kernel.org/linux-hwmon \
		linux-hwmon@vger.kernel.org linux-hwmon@archiver.kernel.org
	public-inbox-index linux-hwmon


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-hwmon


AGPL code for this site: git clone https://public-inbox.org/ public-inbox