linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Iker Perez <iker.perez@codethink.co.uk>
To: linux-hwmon@vger.kernel.org
Cc: linux@roeck-us.net, devicetree@vger.kernel.org,
	Iker Perez del Palomar Sustatxa  <iker.perez@codethink.co.uk>
Subject: [PATCH v4 1/2] hwmon: (lm75) Add support for TMP75B
Date: Fri,  3 May 2019 17:15:00 +0100	[thread overview]
Message-ID: <20190503161501.29489-2-iker.perez@codethink.co.uk> (raw)
In-Reply-To: <20190503161501.29489-1-iker.perez@codethink.co.uk>

From: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>

The TMP75B has a different control register, supports 12-bit
resolution and the default conversion rate is 37 Hz.

Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
---
 Documentation/hwmon/lm75 |  7 +++++--
 drivers/hwmon/lm75.c     | 11 +++++++++++
 2 files changed, 16 insertions(+), 2 deletions(-)

Version log:                                                                     
                                                                                 
- v4:                                                                            
  - Correct the sample time to 37 ms.                                            
- v3:                                                                            
  - Bad assignment, missing spaces before and after "=".                          
  - Divide in two lines longer than 80 characters.                               
  - Separate dt-bindings and driver-documentation into different                 
    commits.                                                                     
- V2:                                                                            
  - Delete empty lines.                                                          
  - Restore replaced tabs by spaces

diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index 010583608f12..0cff924cdbba 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -47,8 +47,10 @@ Supported chips:
     Addresses scanned: none
     Datasheet: Publicly available at the ST website
 	       https://www.st.com/resource/en/datasheet/stlm75.pdf
-  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75C, TMP175, TMP275
-    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp75c', 'tmp275'
+  * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP75B, TMP75C,
+                      TMP175, TMP275
+    Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75',
+              'tmp75b', 'tmp75c', 'tmp275'
     Addresses scanned: none
     Datasheet: Publicly available at the Texas Instruments website
                http://www.ti.com/product/tmp100
@@ -56,6 +58,7 @@ Supported chips:
                http://www.ti.com/product/tmp105
                http://www.ti.com/product/tmp112
                http://www.ti.com/product/tmp75
+               http://www.ti.com/product/tmp75b
                http://www.ti.com/product/tmp75c
                http://www.ti.com/product/tmp175
                http://www.ti.com/product/tmp275
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 447af07450f1..5673fa541f16 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -59,6 +59,7 @@ enum lm75_type {		/* keep sorted in alphabetical order */
 	tmp175,
 	tmp275,
 	tmp75,
+	tmp75b,
 	tmp75c,
 };
 
@@ -378,6 +379,11 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		data->resolution = 12;
 		data->sample_time = MSEC_PER_SEC / 2;
 		break;
+	case tmp75b:  /* not one-shot mode, Conversion rate 37Hz */
+		clr_mask |= 1 << 15 | 0x3 << 13;
+		data->resolution = 12;
+		data->sample_time = MSEC_PER_SEC / 37;
+		break;
 	case tmp75c:
 		clr_mask |= 1 << 5;		/* not one-shot mode */
 		data->resolution = 12;
@@ -438,6 +444,7 @@ static const struct i2c_device_id lm75_ids[] = {
 	{ "tmp175", tmp175, },
 	{ "tmp275", tmp275, },
 	{ "tmp75", tmp75, },
+	{ "tmp75b", tmp75b, },
 	{ "tmp75c", tmp75c, },
 	{ /* LIST END */ }
 };
@@ -537,6 +544,10 @@ static const struct of_device_id lm75_of_match[] = {
 		.data = (void *)tmp75
 	},
 	{
+		.compatible = "ti,tmp75b",
+		.data = (void *)tmp75b
+	},
+	{
 		.compatible = "ti,tmp75c",
 		.data = (void *)tmp75c
 	},
-- 
2.11.0


  reply	other threads:[~2019-05-03 16:15 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-03 16:14 [PATCH v4 0/2] Support for TMP75B temperature sensor Iker Perez
2019-05-03 16:15 ` Iker Perez [this message]
2019-05-03 16:15 ` [PATCH v4 2/2] dt-bindings: hwmon: Add tmp75b to lm75.txt Iker Perez
2019-05-03 20:16 ` [PATCH v4 0/2] Support for TMP75B temperature sensor Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190503161501.29489-2-iker.perez@codethink.co.uk \
    --to=iker.perez@codethink.co.uk \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).