Linux-Hwmon Archive on
 help / color / Atom feed
From: Florian Fainelli <>
	Florian Fainelli <>,
	Sudeep Holla <>,
	Jean Delvare <>,
	Guenter Roeck <>,, (open list:HARDWARE MONITORING)
Subject: [PATCH v3 0/2] hwmon: scmi: Scale values to target desired HWMON units
Date: Tue,  7 May 2019 16:09:15 -0700
Message-ID: <> (raw)

Hi Sudeep, Guenter,

This patch series adds support for scaling SCMI sensor values read from
firmware. Sudeep, let me know if you think we should be treating scale
== 0 as a special value to preserve some firmware compatibility (not
that this would be desired).

Changes in v3:

- add a local __pow10 function to scmi-hwmon.c while a plan to provide
  a generic function is figured out.
- add check on power > 18 which would overflow a 64-bit unsigned integer
- use div64_u64() to properly divide a 64-bit quantity with an unsigned
  64-bit quantity

Changes in v2:

- added a helper function in kernel.h: __pow10()
- made the scale in scmi_sensor_info an s8 type, added defines for
  checking the sign bit and sign extending with a mask
- simplify computations in hwmon driver

Florian Fainelli (2):
  firmware: arm_scmi: Fetch and store sensor scale
  hwmon: scmi: Scale values to target desired HWMON units

 drivers/firmware/arm_scmi/sensors.c |  6 ++++
 drivers/hwmon/scmi-hwmon.c          | 43 ++++++++++++++++++++++++++++-
 include/linux/scmi_protocol.h       |  1 +
 3 files changed, 49 insertions(+), 1 deletion(-)


             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-07 23:09 Florian Fainelli [this message]
2019-05-07 23:09 ` [PATCH v3 1/2] firmware: arm_scmi: Fetch and store sensor scale Florian Fainelli
2019-05-07 23:09 ` [PATCH v3 2/2] hwmon: scmi: Scale values to target desired HWMON units Florian Fainelli
2019-05-07 23:41   ` Guenter Roeck
2019-05-08 11:35 ` [PATCH v3 0/2] " Sudeep Holla
2019-05-08 16:26   ` Florian Fainelli
2019-05-08 16:37     ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Hwmon Archive on

Archives are clonable:
	git clone --mirror linux-hwmon/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-hwmon linux-hwmon/ \
	public-inbox-index linux-hwmon

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox