linux-hwmon.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [v4,1/1] hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.
@ 2019-06-12  8:30 Amy.Shih
  2019-06-12 20:32 ` Guenter Roeck
  0 siblings, 1 reply; 2+ messages in thread
From: Amy.Shih @ 2019-06-12  8:30 UTC (permalink / raw)
  To: she90122
  Cc: amy.shih, oakley.ding, jia.sui, Jean Delvare, Guenter Roeck,
	linux-hwmon, linux-kernel

From: "amy.shih" <amy.shih@advantech.com.tw>

NCT-7904D also supports reading of channel limitation registers
and SMI status registers for fan, voltage and temperature monitoring,
and also supports reading of temperature sensor type which is thermal diode,
thermistor, AMD SB-TSI or Intel PECI, thus add below sysfs nodes:

-fan[1-*]_min
-fan[1-*]_alarm
-in[1-*]_min
-in[1-*]_max
-in[1-*]_alarm
-temp[1-*]_max
-temp[1-*]_max_hyst
-temp[1-*]_crit
-temp[1-*]_crit_hyst
-temp[1-*]_alarm
-temp[1-*]_type

Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
---
 drivers/hwmon/nct7904.c | 496 +++++++++++++++++++++++++++++++++++-----
 1 file changed, 444 insertions(+), 52 deletions(-)

diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index 5708171197e7..1e6b81f12ecb 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -46,10 +46,33 @@
 #define DTS_T_CTRL1_REG		0x27
 #define VT_ADC_MD_REG		0x2E
 
+#define VSEN1_HV_LL_REG		0x02	/* Bank 1; 2 regs (HV/LV) per sensor */
+#define VSEN1_LV_LL_REG		0x03	/* Bank 1; 2 regs (HV/LV) per sensor */
+#define VSEN1_HV_HL_REG		0x00	/* Bank 1; 2 regs (HV/LV) per sensor */
+#define VSEN1_LV_HL_REG		0x01	/* Bank 1; 2 regs (HV/LV) per sensor */
+#define SMI_STS1_REG		0xC1	/* Bank 0; SMI Status Register */
+#define SMI_STS5_REG		0xC5	/* Bank 0; SMI Status Register */
+#define SMI_STS7_REG		0xC7	/* Bank 0; SMI Status Register */
+#define SMI_STS8_REG		0xC8	/* Bank 0; SMI Status Register */
+
 #define VSEN1_HV_REG		0x40	/* Bank 0; 2 regs (HV/LV) per sensor */
 #define TEMP_CH1_HV_REG		0x42	/* Bank 0; same as VSEN2_HV */
 #define LTD_HV_REG		0x62	/* Bank 0; 2 regs in VSEN range */
+#define LTD_HV_HL_REG		0x44	/* Bank 1; 1 reg for LTD */
+#define LTD_LV_HL_REG		0x45	/* Bank 1; 1 reg for LTD */
+#define LTD_HV_LL_REG		0x46	/* Bank 1; 1 reg for LTD */
+#define LTD_LV_LL_REG		0x47	/* Bank 1; 1 reg for LTD */
+#define TEMP_CH1_CH_REG		0x05	/* Bank 1; 1 reg for LTD */
+#define TEMP_CH1_W_REG		0x06	/* Bank 1; 1 reg for LTD */
+#define TEMP_CH1_WH_REG		0x07	/* Bank 1; 1 reg for LTD */
+#define TEMP_CH1_C_REG		0x04	/* Bank 1; 1 reg per sensor */
+#define DTS_T_CPU1_C_REG	0x90	/* Bank 1; 1 reg per sensor */
+#define DTS_T_CPU1_CH_REG	0x91	/* Bank 1; 1 reg per sensor */
+#define DTS_T_CPU1_W_REG	0x92	/* Bank 1; 1 reg per sensor */
+#define DTS_T_CPU1_WH_REG	0x93	/* Bank 1; 1 reg per sensor */
 #define FANIN1_HV_REG		0x80	/* Bank 0; 2 regs (HV/LV) per sensor */
+#define FANIN1_HV_HL_REG	0x60	/* Bank 1; 2 regs (HV/LV) per sensor */
+#define FANIN1_LV_HL_REG	0x61	/* Bank 1; 2 regs (HV/LV) per sensor */
 #define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */
 
 #define PRTS_REG		0x03	/* Bank 2 */
@@ -58,6 +81,8 @@
 #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
 #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
 
+#define ENABLE_TSI	BIT(1)
+
 static const unsigned short normal_i2c[] = {
 	0x2d, 0x2e, I2C_CLIENT_END
 };
@@ -72,6 +97,7 @@ struct nct7904_data {
 	u8 fan_mode[FANCTL_MAX];
 	u8 enable_dts;
 	u8 has_dts;
+	u8 temp_mode; /* 0: TR mode, 1: TD mode */
 };
 
 /* Access functions */
@@ -170,6 +196,25 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
 			rpm = 1350000 / cnt;
 		*val = rpm;
 		return 0;
+	case hwmon_fan_min:
+		ret = nct7904_read_reg16(data, BANK_1,
+					 FANIN1_HV_HL_REG + channel * 2);
+		if (ret < 0)
+			return ret;
+		cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f);
+		if (cnt == 0x1fff)
+			rpm = 0;
+		else
+			rpm = 1350000 / cnt;
+		*val = rpm;
+		return 0;
+	case hwmon_fan_alarm:
+		ret = nct7904_read_reg(data, BANK_0,
+				       SMI_STS7_REG + (channel >> 3));
+		if (ret < 0)
+			return ret;
+		*val = (ret >> (channel & 0x07)) & 1;
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -179,8 +224,20 @@ static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel)
 {
 	const struct nct7904_data *data = _data;
 
-	if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel))
-		return 0444;
+	switch (attr) {
+	case hwmon_fan_input:
+	case hwmon_fan_alarm:
+		if (data->fanin_mask & (1 << channel))
+			return 0444;
+		break;
+	case hwmon_fan_min:
+		if (data->fanin_mask & (1 << channel))
+			return 0644;
+		break;
+	default:
+		break;
+	}
+
 	return 0;
 }
 
@@ -211,6 +268,37 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
 			volt *= 6; /* 0.006V scale */
 		*val = volt;
 		return 0;
+	case hwmon_in_min:
+		ret = nct7904_read_reg16(data, BANK_1,
+					 VSEN1_HV_LL_REG + index * 4);
+		if (ret < 0)
+			return ret;
+		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
+		if (index < 14)
+			volt *= 2; /* 0.002V scale */
+		else
+			volt *= 6; /* 0.006V scale */
+		*val = volt;
+		return 0;
+	case hwmon_in_max:
+		ret = nct7904_read_reg16(data, BANK_1,
+					 VSEN1_HV_HL_REG + index * 4);
+		if (ret < 0)
+			return ret;
+		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
+		if (index < 14)
+			volt *= 2; /* 0.002V scale */
+		else
+			volt *= 6; /* 0.006V scale */
+		*val = volt;
+		return 0;
+	case hwmon_in_alarm:
+		ret = nct7904_read_reg(data, BANK_0,
+				       SMI_STS1_REG + (index >> 3));
+		if (ret < 0)
+			return ret;
+		*val = (ret >> (index & 0x07)) & 1;
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -221,9 +309,20 @@ static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel)
 	const struct nct7904_data *data = _data;
 	int index = nct7904_chan_to_index[channel];
 
-	if (channel > 0 && attr == hwmon_in_input &&
-	    (data->vsen_mask & BIT(index)))
-		return 0444;
+	switch (attr) {
+	case hwmon_in_input:
+	case hwmon_in_alarm:
+		if (channel > 0 && (data->vsen_mask & BIT(index)))
+			return 0444;
+		break;
+	case hwmon_in_min:
+	case hwmon_in_max:
+		if (channel > 0 && (data->vsen_mask & BIT(index)))
+			return 0644;
+		break;
+	default:
+		break;
+	}
 
 	return 0;
 }
@@ -233,6 +332,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 {
 	struct nct7904_data *data = dev_get_drvdata(dev);
 	int ret, temp;
+	unsigned int reg1, reg2, reg3;
 
 	switch (attr) {
 	case hwmon_temp_input:
@@ -250,16 +350,100 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
 		temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
 		*val = sign_extend32(temp, 10) * 125;
 		return 0;
+	case hwmon_temp_alarm:
+		if (channel < 5) {
+			ret = nct7904_read_reg(data, BANK_0,
+					       SMI_STS1_REG);
+			if (ret < 0)
+				return ret;
+			*val = (ret >> (((channel * 2) + 1) & 0x07)) & 1;
+		} else {
+			if ((channel - 5) < 4) {
+				ret = nct7904_read_reg(data, BANK_0,
+						       SMI_STS7_REG +
+						       ((channel - 5) >> 3));
+				if (ret < 0)
+					return ret;
+				*val = (ret >> ((channel - 5) & 0x07)) & 1;
+			} else {
+				ret = nct7904_read_reg(data, BANK_0,
+						       SMI_STS8_REG +
+						       ((channel - 5) >> 3));
+				if (ret < 0)
+					return ret;
+				*val = (ret >> (((channel - 5) & 0x07) - 4))
+							& 1;
+			}
+		}
+		return 0;
+	case hwmon_temp_type:
+		if (channel < 5) {
+			if ((data->tcpu_mask >> channel) & 0x01) {
+				if ((data->temp_mode >> channel) & 0x01)
+					*val = 3; /* TD */
+				else
+					*val = 4; /* TR */
+			} else {
+				*val = 0;
+			}
+		} else {
+			if ((data->has_dts >> (channel - 5)) & 0x01) {
+				if (data->enable_dts & ENABLE_TSI)
+					*val = 5; /* TSI */
+				else
+					*val = 6; /* PECI */
+			} else {
+				*val = 0;
+			}
+		}
+		return 0;
+	case hwmon_temp_max:
+		reg1 = LTD_HV_HL_REG;
+		reg2 = TEMP_CH1_C_REG;
+		reg3 = DTS_T_CPU1_C_REG;
+		break;
+	case hwmon_temp_max_hyst:
+		reg1 = LTD_LV_HL_REG;
+		reg2 = TEMP_CH1_CH_REG;
+		reg3 = DTS_T_CPU1_CH_REG;
+		break;
+	case hwmon_temp_crit:
+		reg1 = LTD_HV_LL_REG;
+		reg2 = TEMP_CH1_W_REG;
+		reg3 = DTS_T_CPU1_W_REG;
+		break;
+	case hwmon_temp_crit_hyst:
+		reg1 = LTD_LV_LL_REG;
+		reg2 = TEMP_CH1_WH_REG;
+		reg3 = DTS_T_CPU1_WH_REG;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
+
+	if (channel == 4)
+		ret = nct7904_read_reg(data, BANK_1, reg1);
+	else if (channel < 5)
+		ret = nct7904_read_reg(data, BANK_1,
+				       reg2 + channel * 8);
+	else
+		ret = nct7904_read_reg(data, BANK_1,
+				       reg3 + (channel - 5) * 4);
+
+	if (ret < 0)
+		return ret;
+	*val = ret * 1000;
+	return 0;
 }
 
 static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
 {
 	const struct nct7904_data *data = _data;
 
-	if (attr == hwmon_temp_input) {
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_alarm:
+	case hwmon_temp_type:
 		if (channel < 5) {
 			if (data->tcpu_mask & BIT(channel))
 				return 0444;
@@ -267,6 +451,21 @@ static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
 			if (data->has_dts & BIT(channel - 5))
 				return 0444;
 		}
+		break;
+	case hwmon_temp_max:
+	case hwmon_temp_max_hyst:
+	case hwmon_temp_crit:
+	case hwmon_temp_crit_hyst:
+		if (channel < 5) {
+			if (data->tcpu_mask & BIT(channel))
+				return 0644;
+		} else {
+			if (data->has_dts & BIT(channel - 5))
+				return 0644;
+		}
+		break;
+	default:
+		break;
 	}
 
 	return 0;
@@ -297,6 +496,137 @@ static int nct7904_read_pwm(struct device *dev, u32 attr, int channel,
 	}
 }
 
+static int nct7904_write_temp(struct device *dev, u32 attr, int channel,
+			      long val)
+{
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	unsigned int reg1, reg2, reg3;
+
+	val = clamp_val(val / 1000, -128, 127);
+
+	switch (attr) {
+	case hwmon_temp_max:
+		reg1 = LTD_HV_HL_REG;
+		reg2 = TEMP_CH1_C_REG;
+		reg3 = DTS_T_CPU1_C_REG;
+		break;
+	case hwmon_temp_max_hyst:
+		reg1 = LTD_LV_HL_REG;
+		reg2 = TEMP_CH1_CH_REG;
+		reg3 = DTS_T_CPU1_CH_REG;
+		break;
+	case hwmon_temp_crit:
+		reg1 = LTD_HV_LL_REG;
+		reg2 = TEMP_CH1_W_REG;
+		reg3 = DTS_T_CPU1_W_REG;
+		break;
+	case hwmon_temp_crit_hyst:
+		reg1 = LTD_LV_LL_REG;
+		reg2 = TEMP_CH1_WH_REG;
+		reg3 = DTS_T_CPU1_WH_REG;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	if (channel == 4)
+		ret = nct7904_write_reg(data, BANK_1, reg1, val);
+	else if (channel < 5)
+		ret = nct7904_write_reg(data, BANK_1,
+					reg2 + channel * 8, val);
+	else
+		ret = nct7904_write_reg(data, BANK_1,
+					reg3 + (channel - 5) * 4, val);
+
+	return ret;
+}
+
+static int nct7904_write_fan(struct device *dev, u32 attr, int channel,
+			     long val)
+{
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret;
+	u8 tmp;
+
+	switch (attr) {
+	case hwmon_fan_min:
+		if (val <= 0)
+			return 0x1fff;
+
+		val = clamp_val((1350000 + (val >> 1)) / val, 1, 0x1fff);
+		tmp = (val >> 5) & 0xff;
+		ret = nct7904_write_reg(data, BANK_1,
+					FANIN1_HV_HL_REG + channel * 2, tmp);
+		if (ret < 0)
+			return ret;
+		tmp = val & 0x1f;
+		ret = nct7904_write_reg(data, BANK_1,
+					FANIN1_LV_HL_REG + channel * 2, tmp);
+		return ret;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int nct7904_write_in(struct device *dev, u32 attr, int channel,
+			    long val)
+{
+	struct nct7904_data *data = dev_get_drvdata(dev);
+	int ret, index, tmp;
+
+	index = nct7904_chan_to_index[channel];
+
+	if (index < 14)
+		val = val / 2; /* 0.002V scale */
+	else
+		val = val / 6; /* 0.006V scale */
+
+	val = clamp_val(val, 0, 0x7ff); /* Bit 15 is sign bit */
+
+	switch (attr) {
+	case hwmon_in_min:
+		tmp = nct7904_read_reg(data, BANK_1,
+				       VSEN1_LV_LL_REG + index * 4);
+		if (tmp < 0)
+			return tmp;
+		tmp &= ~0x7;
+		tmp |= val & 0x7;
+		ret = nct7904_write_reg(data, BANK_1,
+					VSEN1_LV_LL_REG + index * 4, tmp);
+		if (ret < 0)
+			return ret;
+		tmp = nct7904_read_reg(data, BANK_1,
+				       VSEN1_HV_LL_REG + index * 4);
+		if (tmp < 0)
+			return tmp;
+		tmp = (val >> 3) & 0xff;
+		ret = nct7904_write_reg(data, BANK_1,
+					VSEN1_HV_LL_REG + index * 4, tmp);
+		return ret;
+	case hwmon_in_max:
+		tmp = nct7904_read_reg(data, BANK_1,
+				       VSEN1_LV_HL_REG + index * 4);
+		if (tmp < 0)
+			return tmp;
+		tmp &= ~0x7;
+		tmp |= val & 0x7;
+		ret = nct7904_write_reg(data, BANK_1,
+					VSEN1_LV_HL_REG + index * 4, tmp);
+		if (ret < 0)
+			return ret;
+		tmp = nct7904_read_reg(data, BANK_1,
+				       VSEN1_HV_HL_REG + index * 4);
+		if (tmp < 0)
+			return tmp;
+		tmp = (val >> 3) & 0xff;
+		ret = nct7904_write_reg(data, BANK_1,
+					VSEN1_HV_HL_REG + index * 4, tmp);
+		return ret;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
 			     long val)
 {
@@ -354,8 +684,14 @@ static int nct7904_write(struct device *dev, enum hwmon_sensor_types type,
 			 u32 attr, int channel, long val)
 {
 	switch (type) {
+	case hwmon_in:
+		return nct7904_write_in(dev, attr, channel, val);
+	case hwmon_fan:
+		return nct7904_write_fan(dev, attr, channel, val);
 	case hwmon_pwm:
 		return nct7904_write_pwm(dev, attr, channel, val);
+	case hwmon_temp:
+		return nct7904_write_temp(dev, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -404,51 +740,91 @@ static int nct7904_detect(struct i2c_client *client,
 
 static const struct hwmon_channel_info *nct7904_info[] = {
 	HWMON_CHANNEL_INFO(in,
-			   HWMON_I_INPUT, /* dummy, skipped in is_visible */
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT,
-			   HWMON_I_INPUT),
+			   /* dummy, skipped in is_visible */
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
+			   HWMON_I_ALARM),
 	HWMON_CHANNEL_INFO(fan,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT,
-			   HWMON_F_INPUT),
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
+			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM),
 	HWMON_CHANNEL_INFO(pwm,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
 			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
 	HWMON_CHANNEL_INFO(temp,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT,
-			   HWMON_T_INPUT),
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST,
+			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
+			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
+			   HWMON_T_CRIT_HYST),
 	NULL
 };
 
@@ -506,6 +882,8 @@ static int nct7904_probe(struct i2c_client *client,
 
 	/* CPU_TEMP attributes */
 	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL0_REG);
+	if (ret < 0)
+		return ret;
 
 	if ((ret & 0x6) == 0x6)
 		data->tcpu_mask |= 1; /* TR1 */
@@ -518,37 +896,51 @@ static int nct7904_probe(struct i2c_client *client,
 
 	/* LTD */
 	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG);
+	if (ret < 0)
+		return ret;
 	if ((ret & 0x02) == 0x02)
 		data->tcpu_mask |= 0x10;
 
 	/* Multi-Function detecting for Volt and TR/TD */
 	ret = nct7904_read_reg(data, BANK_0, VT_ADC_MD_REG);
+	if (ret < 0)
+		return ret;
 
+	data->temp_mode = 0;
 	for (i = 0; i < 4; i++) {
 		val = (ret & (0x03 << i)) >> (i * 2);
 		bit = (1 << i);
 		if (val == 0)
 			data->tcpu_mask &= ~bit;
+		else if (val == 0x1 || val == 0x2)
+			data->temp_mode |= bit;
 	}
 
 	/* PECI */
 	ret = nct7904_read_reg(data, BANK_2, PFE_REG);
+	if (ret < 0)
+		return ret;
 	if (ret & 0x80) {
-		data->enable_dts = 1; //Enable DTS & PECI
+		data->enable_dts = 1; /* Enable DTS & PECI */
 	} else {
 		ret = nct7904_read_reg(data, BANK_2, TSI_CTRL_REG);
+		if (ret < 0)
+			return ret;
 		if (ret & 0x80)
-			data->enable_dts = 0x3; //Enable DTS & TSI
+			data->enable_dts = 0x3; /* Enable DTS & TSI */
 	}
 
 	/* Check DTS enable status */
 	if (data->enable_dts) {
-		data->has_dts =
-			nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG) & 0xF;
-		if (data->enable_dts & 0x2) {
-			data->has_dts |=
-			(nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG) & 0xF)
-								<< 4;
+		ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG);
+		if (ret < 0)
+			return ret;
+		data->has_dts = ret & 0xF;
+		if (data->enable_dts & ENABLE_TSI) {
+			ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG);
+			if (ret < 0)
+				return ret;
+			data->has_dts |= (ret & 0xF) << 4;
 		}
 	}
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread

* Re: [v4,1/1] hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.
  2019-06-12  8:30 [v4,1/1] hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature Amy.Shih
@ 2019-06-12 20:32 ` Guenter Roeck
  0 siblings, 0 replies; 2+ messages in thread
From: Guenter Roeck @ 2019-06-12 20:32 UTC (permalink / raw)
  To: Amy.Shih
  Cc: she90122, oakley.ding, jia.sui, Jean Delvare, linux-hwmon, linux-kernel

On Wed, Jun 12, 2019 at 08:30:48AM +0000, Amy.Shih@advantech.com.tw wrote:
> From: "amy.shih" <amy.shih@advantech.com.tw>
> 
> NCT-7904D also supports reading of channel limitation registers
> and SMI status registers for fan, voltage and temperature monitoring,
> and also supports reading of temperature sensor type which is thermal diode,
> thermistor, AMD SB-TSI or Intel PECI, thus add below sysfs nodes:
> 
> -fan[1-*]_min
> -fan[1-*]_alarm
> -in[1-*]_min
> -in[1-*]_max
> -in[1-*]_alarm
> -temp[1-*]_max
> -temp[1-*]_max_hyst
> -temp[1-*]_crit
> -temp[1-*]_crit_hyst
> -temp[1-*]_alarm
> -temp[1-*]_type
> 
> Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
> ---
>  drivers/hwmon/nct7904.c | 496 +++++++++++++++++++++++++++++++++++-----
>  1 file changed, 444 insertions(+), 52 deletions(-)
> 
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index 5708171197e7..1e6b81f12ecb 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -46,10 +46,33 @@
>  #define DTS_T_CTRL1_REG		0x27
>  #define VT_ADC_MD_REG		0x2E
>  
> +#define VSEN1_HV_LL_REG		0x02	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_LV_LL_REG		0x03	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_HV_HL_REG		0x00	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define VSEN1_LV_HL_REG		0x01	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define SMI_STS1_REG		0xC1	/* Bank 0; SMI Status Register */
> +#define SMI_STS5_REG		0xC5	/* Bank 0; SMI Status Register */
> +#define SMI_STS7_REG		0xC7	/* Bank 0; SMI Status Register */
> +#define SMI_STS8_REG		0xC8	/* Bank 0; SMI Status Register */
> +
>  #define VSEN1_HV_REG		0x40	/* Bank 0; 2 regs (HV/LV) per sensor */
>  #define TEMP_CH1_HV_REG		0x42	/* Bank 0; same as VSEN2_HV */
>  #define LTD_HV_REG		0x62	/* Bank 0; 2 regs in VSEN range */
> +#define LTD_HV_HL_REG		0x44	/* Bank 1; 1 reg for LTD */
> +#define LTD_LV_HL_REG		0x45	/* Bank 1; 1 reg for LTD */
> +#define LTD_HV_LL_REG		0x46	/* Bank 1; 1 reg for LTD */
> +#define LTD_LV_LL_REG		0x47	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_CH_REG		0x05	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_W_REG		0x06	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_WH_REG		0x07	/* Bank 1; 1 reg for LTD */
> +#define TEMP_CH1_C_REG		0x04	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_C_REG	0x90	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_CH_REG	0x91	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_W_REG	0x92	/* Bank 1; 1 reg per sensor */
> +#define DTS_T_CPU1_WH_REG	0x93	/* Bank 1; 1 reg per sensor */
>  #define FANIN1_HV_REG		0x80	/* Bank 0; 2 regs (HV/LV) per sensor */
> +#define FANIN1_HV_HL_REG	0x60	/* Bank 1; 2 regs (HV/LV) per sensor */
> +#define FANIN1_LV_HL_REG	0x61	/* Bank 1; 2 regs (HV/LV) per sensor */
>  #define T_CPU1_HV_REG		0xA0	/* Bank 0; 2 regs (HV/LV) per sensor */
>  
>  #define PRTS_REG		0x03	/* Bank 2 */
> @@ -58,6 +81,8 @@
>  #define FANCTL1_FMR_REG		0x00	/* Bank 3; 1 reg per channel */
>  #define FANCTL1_OUT_REG		0x10	/* Bank 3; 1 reg per channel */
>  
> +#define ENABLE_TSI	BIT(1)
> +
>  static const unsigned short normal_i2c[] = {
>  	0x2d, 0x2e, I2C_CLIENT_END
>  };
> @@ -72,6 +97,7 @@ struct nct7904_data {
>  	u8 fan_mode[FANCTL_MAX];
>  	u8 enable_dts;
>  	u8 has_dts;
> +	u8 temp_mode; /* 0: TR mode, 1: TD mode */
>  };
>  
>  /* Access functions */
> @@ -170,6 +196,25 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
>  			rpm = 1350000 / cnt;
>  		*val = rpm;
>  		return 0;
> +	case hwmon_fan_min:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 FANIN1_HV_HL_REG + channel * 2);
> +		if (ret < 0)
> +			return ret;
> +		cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f);
> +		if (cnt == 0x1fff)
> +			rpm = 0;
> +		else
> +			rpm = 1350000 / cnt;
> +		*val = rpm;
> +		return 0;
> +	case hwmon_fan_alarm:
> +		ret = nct7904_read_reg(data, BANK_0,
> +				       SMI_STS7_REG + (channel >> 3));
> +		if (ret < 0)
> +			return ret;
> +		*val = (ret >> (channel & 0x07)) & 1;
> +		return 0;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -179,8 +224,20 @@ static umode_t nct7904_fan_is_visible(const void *_data, u32 attr, int channel)
>  {
>  	const struct nct7904_data *data = _data;
>  
> -	if (attr == hwmon_fan_input && data->fanin_mask & (1 << channel))
> -		return 0444;
> +	switch (attr) {
> +	case hwmon_fan_input:
> +	case hwmon_fan_alarm:
> +		if (data->fanin_mask & (1 << channel))
> +			return 0444;
> +		break;
> +	case hwmon_fan_min:
> +		if (data->fanin_mask & (1 << channel))
> +			return 0644;
> +		break;
> +	default:
> +		break;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -211,6 +268,37 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
>  			volt *= 6; /* 0.006V scale */
>  		*val = volt;
>  		return 0;
> +	case hwmon_in_min:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 VSEN1_HV_LL_REG + index * 4);
> +		if (ret < 0)
> +			return ret;
> +		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
> +		if (index < 14)
> +			volt *= 2; /* 0.002V scale */
> +		else
> +			volt *= 6; /* 0.006V scale */
> +		*val = volt;
> +		return 0;
> +	case hwmon_in_max:
> +		ret = nct7904_read_reg16(data, BANK_1,
> +					 VSEN1_HV_HL_REG + index * 4);
> +		if (ret < 0)
> +			return ret;
> +		volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
> +		if (index < 14)
> +			volt *= 2; /* 0.002V scale */
> +		else
> +			volt *= 6; /* 0.006V scale */
> +		*val = volt;
> +		return 0;
> +	case hwmon_in_alarm:
> +		ret = nct7904_read_reg(data, BANK_0,
> +				       SMI_STS1_REG + (index >> 3));
> +		if (ret < 0)
> +			return ret;
> +		*val = (ret >> (index & 0x07)) & 1;
> +		return 0;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -221,9 +309,20 @@ static umode_t nct7904_in_is_visible(const void *_data, u32 attr, int channel)
>  	const struct nct7904_data *data = _data;
>  	int index = nct7904_chan_to_index[channel];
>  
> -	if (channel > 0 && attr == hwmon_in_input &&
> -	    (data->vsen_mask & BIT(index)))
> -		return 0444;
> +	switch (attr) {
> +	case hwmon_in_input:
> +	case hwmon_in_alarm:
> +		if (channel > 0 && (data->vsen_mask & BIT(index)))
> +			return 0444;
> +		break;
> +	case hwmon_in_min:
> +	case hwmon_in_max:
> +		if (channel > 0 && (data->vsen_mask & BIT(index)))
> +			return 0644;
> +		break;
> +	default:
> +		break;
> +	}
>  
>  	return 0;
>  }
> @@ -233,6 +332,7 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  {
>  	struct nct7904_data *data = dev_get_drvdata(dev);
>  	int ret, temp;
> +	unsigned int reg1, reg2, reg3;
>  
>  	switch (attr) {
>  	case hwmon_temp_input:
> @@ -250,16 +350,100 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
>  		temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
>  		*val = sign_extend32(temp, 10) * 125;
>  		return 0;
> +	case hwmon_temp_alarm:
> +		if (channel < 5) {
> +			ret = nct7904_read_reg(data, BANK_0,
> +					       SMI_STS1_REG);
> +			if (ret < 0)
> +				return ret;
> +			*val = (ret >> (((channel * 2) + 1) & 0x07)) & 1;
> +		} else {
> +			if ((channel - 5) < 4) {
> +				ret = nct7904_read_reg(data, BANK_0,
> +						       SMI_STS7_REG +
> +						       ((channel - 5) >> 3));
> +				if (ret < 0)
> +					return ret;
> +				*val = (ret >> ((channel - 5) & 0x07)) & 1;
> +			} else {
> +				ret = nct7904_read_reg(data, BANK_0,
> +						       SMI_STS8_REG +
> +						       ((channel - 5) >> 3));
> +				if (ret < 0)
> +					return ret;
> +				*val = (ret >> (((channel - 5) & 0x07) - 4))
> +							& 1;
> +			}
> +		}
> +		return 0;
> +	case hwmon_temp_type:
> +		if (channel < 5) {
> +			if ((data->tcpu_mask >> channel) & 0x01) {
> +				if ((data->temp_mode >> channel) & 0x01)
> +					*val = 3; /* TD */
> +				else
> +					*val = 4; /* TR */
> +			} else {
> +				*val = 0;
> +			}
> +		} else {
> +			if ((data->has_dts >> (channel - 5)) & 0x01) {
> +				if (data->enable_dts & ENABLE_TSI)
> +					*val = 5; /* TSI */
> +				else
> +					*val = 6; /* PECI */
> +			} else {
> +				*val = 0;
> +			}
> +		}
> +		return 0;
> +	case hwmon_temp_max:
> +		reg1 = LTD_HV_HL_REG;
> +		reg2 = TEMP_CH1_C_REG;
> +		reg3 = DTS_T_CPU1_C_REG;
> +		break;
> +	case hwmon_temp_max_hyst:
> +		reg1 = LTD_LV_HL_REG;
> +		reg2 = TEMP_CH1_CH_REG;
> +		reg3 = DTS_T_CPU1_CH_REG;
> +		break;
> +	case hwmon_temp_crit:
> +		reg1 = LTD_HV_LL_REG;
> +		reg2 = TEMP_CH1_W_REG;
> +		reg3 = DTS_T_CPU1_W_REG;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		reg1 = LTD_LV_LL_REG;
> +		reg2 = TEMP_CH1_WH_REG;
> +		reg3 = DTS_T_CPU1_WH_REG;
> +		break;
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> +
> +	if (channel == 4)
> +		ret = nct7904_read_reg(data, BANK_1, reg1);
> +	else if (channel < 5)
> +		ret = nct7904_read_reg(data, BANK_1,
> +				       reg2 + channel * 8);
> +	else
> +		ret = nct7904_read_reg(data, BANK_1,
> +				       reg3 + (channel - 5) * 4);
> +
> +	if (ret < 0)
> +		return ret;
> +	*val = ret * 1000;
> +	return 0;
>  }
>  
>  static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
>  {
>  	const struct nct7904_data *data = _data;
>  
> -	if (attr == hwmon_temp_input) {
> +	switch (attr) {
> +	case hwmon_temp_input:
> +	case hwmon_temp_alarm:
> +	case hwmon_temp_type:
>  		if (channel < 5) {
>  			if (data->tcpu_mask & BIT(channel))
>  				return 0444;
> @@ -267,6 +451,21 @@ static umode_t nct7904_temp_is_visible(const void *_data, u32 attr, int channel)
>  			if (data->has_dts & BIT(channel - 5))
>  				return 0444;
>  		}
> +		break;
> +	case hwmon_temp_max:
> +	case hwmon_temp_max_hyst:
> +	case hwmon_temp_crit:
> +	case hwmon_temp_crit_hyst:
> +		if (channel < 5) {
> +			if (data->tcpu_mask & BIT(channel))
> +				return 0644;
> +		} else {
> +			if (data->has_dts & BIT(channel - 5))
> +				return 0644;
> +		}
> +		break;
> +	default:
> +		break;
>  	}
>  
>  	return 0;
> @@ -297,6 +496,137 @@ static int nct7904_read_pwm(struct device *dev, u32 attr, int channel,
>  	}
>  }
>  
> +static int nct7904_write_temp(struct device *dev, u32 attr, int channel,
> +			      long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret;
> +	unsigned int reg1, reg2, reg3;
> +
> +	val = clamp_val(val / 1000, -128, 127);
> +
> +	switch (attr) {
> +	case hwmon_temp_max:
> +		reg1 = LTD_HV_HL_REG;
> +		reg2 = TEMP_CH1_C_REG;
> +		reg3 = DTS_T_CPU1_C_REG;
> +		break;
> +	case hwmon_temp_max_hyst:
> +		reg1 = LTD_LV_HL_REG;
> +		reg2 = TEMP_CH1_CH_REG;
> +		reg3 = DTS_T_CPU1_CH_REG;
> +		break;
> +	case hwmon_temp_crit:
> +		reg1 = LTD_HV_LL_REG;
> +		reg2 = TEMP_CH1_W_REG;
> +		reg3 = DTS_T_CPU1_W_REG;
> +		break;
> +	case hwmon_temp_crit_hyst:
> +		reg1 = LTD_LV_LL_REG;
> +		reg2 = TEMP_CH1_WH_REG;
> +		reg3 = DTS_T_CPU1_WH_REG;
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +	if (channel == 4)
> +		ret = nct7904_write_reg(data, BANK_1, reg1, val);
> +	else if (channel < 5)
> +		ret = nct7904_write_reg(data, BANK_1,
> +					reg2 + channel * 8, val);
> +	else
> +		ret = nct7904_write_reg(data, BANK_1,
> +					reg3 + (channel - 5) * 4, val);
> +
> +	return ret;
> +}
> +
> +static int nct7904_write_fan(struct device *dev, u32 attr, int channel,
> +			     long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret;
> +	u8 tmp;
> +
> +	switch (attr) {
> +	case hwmon_fan_min:
> +		if (val <= 0)
> +			return 0x1fff;
> +
What exactly is this return value supposed to reflect ? Expected return
value is either 0 or an error code. 0x1fff is not a valid return code.

> +		val = clamp_val((1350000 + (val >> 1)) / val, 1, 0x1fff);
> +		tmp = (val >> 5) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					FANIN1_HV_HL_REG + channel * 2, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = val & 0x1f;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					FANIN1_LV_HL_REG + channel * 2, tmp);
> +		return ret;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int nct7904_write_in(struct device *dev, u32 attr, int channel,
> +			    long val)
> +{
> +	struct nct7904_data *data = dev_get_drvdata(dev);
> +	int ret, index, tmp;
> +
> +	index = nct7904_chan_to_index[channel];
> +
> +	if (index < 14)
> +		val = val / 2; /* 0.002V scale */
> +	else
> +		val = val / 6; /* 0.006V scale */
> +
> +	val = clamp_val(val, 0, 0x7ff); /* Bit 15 is sign bit */

What is "Bit 15 is sign bit" supposed to mean ?
I don't find an indication that the chips reports or accepts
negative voltages, the clamp does not accept negative values,
and nct7904_read_in() does not report negative values either.
I find the comment just confusing.

> +
> +	switch (attr) {
> +	case hwmon_in_min:
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_LV_LL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp &= ~0x7;
> +		tmp |= val & 0x7;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_LV_LL_REG + index * 4, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_HV_LL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp = (val >> 3) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_HV_LL_REG + index * 4, tmp);
> +		return ret;
> +	case hwmon_in_max:
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_LV_HL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp &= ~0x7;
> +		tmp |= val & 0x7;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_LV_HL_REG + index * 4, tmp);
> +		if (ret < 0)
> +			return ret;
> +		tmp = nct7904_read_reg(data, BANK_1,
> +				       VSEN1_HV_HL_REG + index * 4);
> +		if (tmp < 0)
> +			return tmp;
> +		tmp = (val >> 3) & 0xff;
> +		ret = nct7904_write_reg(data, BANK_1,
> +					VSEN1_HV_HL_REG + index * 4, tmp);
> +		return ret;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>  static int nct7904_write_pwm(struct device *dev, u32 attr, int channel,
>  			     long val)
>  {
> @@ -354,8 +684,14 @@ static int nct7904_write(struct device *dev, enum hwmon_sensor_types type,
>  			 u32 attr, int channel, long val)
>  {
>  	switch (type) {
> +	case hwmon_in:
> +		return nct7904_write_in(dev, attr, channel, val);
> +	case hwmon_fan:
> +		return nct7904_write_fan(dev, attr, channel, val);
>  	case hwmon_pwm:
>  		return nct7904_write_pwm(dev, attr, channel, val);
> +	case hwmon_temp:
> +		return nct7904_write_temp(dev, attr, channel, val);
>  	default:
>  		return -EOPNOTSUPP;
>  	}
> @@ -404,51 +740,91 @@ static int nct7904_detect(struct i2c_client *client,
>  
>  static const struct hwmon_channel_info *nct7904_info[] = {
>  	HWMON_CHANNEL_INFO(in,
> -			   HWMON_I_INPUT, /* dummy, skipped in is_visible */
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT,
> -			   HWMON_I_INPUT),
> +			   /* dummy, skipped in is_visible */
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM,
> +			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_MAX |
> +			   HWMON_I_ALARM),
>  	HWMON_CHANNEL_INFO(fan,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT,
> -			   HWMON_F_INPUT),
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM,
> +			   HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_ALARM),
>  	HWMON_CHANNEL_INFO(pwm,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
>  			   HWMON_PWM_INPUT | HWMON_PWM_ENABLE),
>  	HWMON_CHANNEL_INFO(temp,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT,
> -			   HWMON_T_INPUT),
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST,
> +			   HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_MAX |
> +			   HWMON_T_MAX_HYST | HWMON_T_TYPE | HWMON_T_CRIT |
> +			   HWMON_T_CRIT_HYST),
>  	NULL
>  };
>  
> @@ -506,6 +882,8 @@ static int nct7904_probe(struct i2c_client *client,
>  
>  	/* CPU_TEMP attributes */
>  	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL0_REG);
> +	if (ret < 0)
> +		return ret;
>  
>  	if ((ret & 0x6) == 0x6)
>  		data->tcpu_mask |= 1; /* TR1 */
> @@ -518,37 +896,51 @@ static int nct7904_probe(struct i2c_client *client,
>  
>  	/* LTD */
>  	ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG);
> +	if (ret < 0)
> +		return ret;
>  	if ((ret & 0x02) == 0x02)
>  		data->tcpu_mask |= 0x10;
>  
>  	/* Multi-Function detecting for Volt and TR/TD */
>  	ret = nct7904_read_reg(data, BANK_0, VT_ADC_MD_REG);
> +	if (ret < 0)
> +		return ret;
>  
> +	data->temp_mode = 0;
>  	for (i = 0; i < 4; i++) {
>  		val = (ret & (0x03 << i)) >> (i * 2);
>  		bit = (1 << i);
>  		if (val == 0)
>  			data->tcpu_mask &= ~bit;
> +		else if (val == 0x1 || val == 0x2)
> +			data->temp_mode |= bit;
>  	}
>  
>  	/* PECI */
>  	ret = nct7904_read_reg(data, BANK_2, PFE_REG);
> +	if (ret < 0)
> +		return ret;
>  	if (ret & 0x80) {
> -		data->enable_dts = 1; //Enable DTS & PECI
> +		data->enable_dts = 1; /* Enable DTS & PECI */
>  	} else {
>  		ret = nct7904_read_reg(data, BANK_2, TSI_CTRL_REG);
> +		if (ret < 0)
> +			return ret;
>  		if (ret & 0x80)
> -			data->enable_dts = 0x3; //Enable DTS & TSI
> +			data->enable_dts = 0x3; /* Enable DTS & TSI */
>  	}
>  
>  	/* Check DTS enable status */
>  	if (data->enable_dts) {
> -		data->has_dts =
> -			nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG) & 0xF;
> -		if (data->enable_dts & 0x2) {
> -			data->has_dts |=
> -			(nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG) & 0xF)
> -								<< 4;
> +		ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG);
> +		if (ret < 0)
> +			return ret;
> +		data->has_dts = ret & 0xF;
> +		if (data->enable_dts & ENABLE_TSI) {
> +			ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG);
> +			if (ret < 0)
> +				return ret;
> +			data->has_dts |= (ret & 0xF) << 4;
>  		}
>  	}
>  
> -- 
> 2.17.1
> 

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2019-06-12 20:32 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-12  8:30 [v4,1/1] hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature Amy.Shih
2019-06-12 20:32 ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).