Re: [v4 1/2] hwmon: (nct7904) Fix the incorrect return value of case hwmon_fan_min in function "nct7904_write_fan".

[Guenter Roeck <linux@roeck-us.net>]

On Tue, Aug 06, 2019 at 02:30:07AM +0000, Amy.Shih@advantech.com.tw wrote:
> From: "amy.shih" <amy.shih@advantech.com.tw>
> 
> Return the -EINVAL(Invalid argument) when writing the values <= 0
> to sysfs node fan[1-*]_min.
> 
> Signed-off-by: amy.shih <amy.shih@advantech.com.tw>
> 

This again fixes a previous patch of the series. Please squash
the entire series (all three patches) together in a single patch.

Thanks,
Guenter

> Changes in v4:
> - Fix the incorrect return value of case hwmon_fan_min in function "nct7904_write_fan".
> Changes in v3:
> - Squashed subsequent fixes of below patches into one patch.
> 
> -- Fix bad fallthrough in various switch statements.
> -- Fix the wrong declared of tmp as u8 in nct7904_write_in, declared tmp to int.
> -- Fix incorrect register setting of voltage.
> -- Fix incorrect register bit mapping of temperature alarm.
> -- Fix wrong return code 0x1fff in function nct7904_write_fan.
> -- Delete wrong comment in function nct7904_write_in.
> -- Fix wrong attribute names for temperature.
> -- Fix wrong registers setting for temperature.
> 
> Changes in v2:
> - Fix bad fallthrough in various switch statements.
> - Fix the wrong declared of tmp as u8 in nct7904_write_in, declared tmp to int.
> ---
>  drivers/hwmon/nct7904.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index d842c10ba11f..6527b56e4f6c 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -551,7 +551,7 @@ static int nct7904_write_fan(struct device *dev, u32 attr, int channel,
>  	switch (attr) {
>  	case hwmon_fan_min:
>  		if (val <= 0)
> -			return 0;
> +			return -EINVAL;
>  
>  		val = clamp_val((1350000 + (val >> 1)) / val, 1, 0x1fff);
>  		tmp = (val >> 5) & 0xff;
> -- 
> 2.17.1
>